BMW > Z4M > A) ENGINE PERFORMANCE (See also forced induction & remapping sections) > - Oil, Water & Cooling System Upgrades, Connector Blocks, Sump Baffles, Guards Etc > ROGUE ENGINEERING
ROGUE ENGINEERING S54 CONSTANT PRESSURE VALVE O RING
£8.31 inc. VAT
Product Code: res54cpvor
Click to Enlarge
Click to Enlarge
Description
RE part number s54van
If you have Got an S54 You probably have a leaking CPV.
One of the leaks from an S54 is when the Constant Pressure Valve (CPV) requires replacement.
The CPV is located on the right side of the engine (behind the exhaust manifolds). The valve has an o-ring that tends to flatten and harden over time (and heat) and no longer seals adequately.
Replacement of the valve takes about 1.5 hours (about 5 minutes when the factory headers are out).
Fortunately, this little valve is not too expensive, but you can make the replacement even better!
Solutions to a Potential Problem
By getting a replacement valve (BMW Part No: 11 11 1 318 185), replacing the stock o-ring with the Rogue Engineering CPV o-ring will allow it to last longer than stock!
When you take out the original one, the o-ring on the CPV is as hard as a rock, without elasticity. It cannot do the job of sealing up the engine block anymore.
The Rogue Engineering CPV O-Ring is made from Viton® fluoroelastomer with a temperature range of -40° to +400°F. This allows for a longer lifespan of the CPV (and less leaks!).
Currently, the replacement CPV O-Ring fit the following S54 equipped vehicles:
- 2001-06 E46 M3s (US or Euro)
- 2001-02 E36/7 MZ3 Coupe/Roadster
- 2007-08 E85 MZ4 Coupe/Convertible
*(THIS LISTING IS FOR THE O-RING ONLY)*
Estimated Volumetric Shipping Weight : 1.00 Kg
If you have Got an S54 You probably have a leaking CPV.
One of the leaks from an S54 is when the Constant Pressure Valve (CPV) requires replacement.
The CPV is located on the right side of the engine (behind the exhaust manifolds). The valve has an o-ring that tends to flatten and harden over time (and heat) and no longer seals adequately.
Replacement of the valve takes about 1.5 hours (about 5 minutes when the factory headers are out).
Fortunately, this little valve is not too expensive, but you can make the replacement even better!
Solutions to a Potential Problem
By getting a replacement valve (BMW Part No: 11 11 1 318 185), replacing the stock o-ring with the Rogue Engineering CPV o-ring will allow it to last longer than stock!
When you take out the original one, the o-ring on the CPV is as hard as a rock, without elasticity. It cannot do the job of sealing up the engine block anymore.
The Rogue Engineering CPV O-Ring is made from Viton® fluoroelastomer with a temperature range of -40° to +400°F. This allows for a longer lifespan of the CPV (and less leaks!).
Currently, the replacement CPV O-Ring fit the following S54 equipped vehicles:
- 2001-06 E46 M3s (US or Euro)
- 2001-02 E36/7 MZ3 Coupe/Roadster
- 2007-08 E85 MZ4 Coupe/Convertible
*(THIS LISTING IS FOR THE O-RING ONLY)*
Estimated Volumetric Shipping Weight : 1.00 Kg