BMW > M3 (E90/E92/E93) > A) ENGINE PERFORMANCE (See also forced induction & remapping sections) > - Exhausts and Related, Tailpipes Etc > MACHT SCHNELL
MACHT SCHNELL E9X M3 BYPASS TRACK PIPES
£407.29 inc. VAT
Product Code: 3900015
Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge
Click to Enlarge
Description
On the S65 V8 M3 models, the stock exhaust headers flow very well while the catalysts present the largest obstacle and power loss.
The Macht Schnell Bypass Track Pipes were designed specifically for race/track use, and offer a cost-effective means of removing the 400 cell restrictive primary catalytic converters on all 2008-2013 M3s.
Bypass Track Pipes allow you to make two single cuts to your stock midpipe section, removing the catalytic converters, and clamping the largest diameter straight pipe in their place using the provided high-end/premium exhaust clamps. This eliminates the largest source of exhaust restriction, unleashing considerable power gains (~20hp) and a very obvious improvement in acceleration.
Macht Schnell Bypass Track Pipes permit you to retain your OEM secondary cats and resonators, keeping noise levels tame enough for even the most stringent sound limitations found at many track events (nearly stock decibel levels), and also keeping costs to a minimum. No welding is required for installation, simply cut and bolt into place using supplied exhaust clamps.
Aftermarket software required to prevent Check Engine lamp from illuminating.
Bypass Track Pipe Features:
- Full Stainless Steel Construction, with mandrel bends for optimum flow
- Straight shot design for zero restriction and high velocity
- Gains as high as 20hp/20lb-ft
- Retains OEM O2 locations
- Retains use of OEM crush gaskets
*(Priced per set)*
Estimated Volumetric Shipping Weight : 20.00 Kg
The Macht Schnell Bypass Track Pipes were designed specifically for race/track use, and offer a cost-effective means of removing the 400 cell restrictive primary catalytic converters on all 2008-2013 M3s.
Bypass Track Pipes allow you to make two single cuts to your stock midpipe section, removing the catalytic converters, and clamping the largest diameter straight pipe in their place using the provided high-end/premium exhaust clamps. This eliminates the largest source of exhaust restriction, unleashing considerable power gains (~20hp) and a very obvious improvement in acceleration.
Macht Schnell Bypass Track Pipes permit you to retain your OEM secondary cats and resonators, keeping noise levels tame enough for even the most stringent sound limitations found at many track events (nearly stock decibel levels), and also keeping costs to a minimum. No welding is required for installation, simply cut and bolt into place using supplied exhaust clamps.
Aftermarket software required to prevent Check Engine lamp from illuminating.
Bypass Track Pipe Features:
- Full Stainless Steel Construction, with mandrel bends for optimum flow
- Straight shot design for zero restriction and high velocity
- Gains as high as 20hp/20lb-ft
- Retains OEM O2 locations
- Retains use of OEM crush gaskets
*(Priced per set)*
Estimated Volumetric Shipping Weight : 20.00 Kg