BMW > Z4M > A) ENGINE PERFORMANCE (See also forced induction & remapping sections) > - Power Pulleys / Light Weight Crank Pulleys, Harmonic Balancers Etc > CREST AUTOMOTIVE / OTHER
Click to Enlarge
Description
THIS PAGE LISTS THE APPLICATION FOR THE S50 B30 AND S50 B32 EURO ENGINES (E36M3 + Z3M EARLY). PLEASE REFER TO VARIATIONS SECTIONS ( USE RED LINK BUTTON TOP RIGHT) FOR S54 APPLICATIONS.
Isolate harmonics before they can destroy your engine.
If your engine build is plagued with broken crankshafts and oil pumps, the cause may be a mystery to you as it has been to many. Controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive.
The truth is, harmonics can destroy these motors despite their ideal balance.
ATI Performance Products, a leader in Harmonic Dampers has developed two new dampers (Part # 917994 & 917994TR) for the popular S54 & S50b32 Euro, as well as the 3 liter S50b30 Euro.
These dampers are made available exclusively through VAC, and they nearly eliminate all unstable crankshaft harmonic-vibration, allowing the engine to produce more horsepower and torque, maintain reliability, and reducing internal engine wear at the same time.
A trigger wheel comes standard on M3 Damper (Part # 917994TR) needed for M3 euro engines.
When used with the included pulley, they allow a direct replacement fit over the OEM balancer. Available in underdriven , overdriven or standard diameters . Also, configurations available for use with our dry sump kits. Both dampers have a 7" outer diameter and include OEM style timing alignment tabs.
• ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition
•Made in USA
•Eliminate problems with inline 6s fitted with lightweight clutch and flywheel assemblies
•Control destructive harmonic forces
•Reduces instances of bearing wear, accessory failure and oil pump failure
•Includes lightweight VAC Billet Crankshaft Pulley (not shown)
ATI Performance Products, Inc. is located in Baltimore, MD, and specializes in producing and maintaining high performance products for street and strip applications. Over the years ATI has earned a reputation for its cutting edge technology, attention to detail and rigorous testing under race conditions. We are proud to have them as an exclusive partner in these BMW applications.
Estimated Volumetric Shipping Weight : 5.00 Kg
Isolate harmonics before they can destroy your engine.
If your engine build is plagued with broken crankshafts and oil pumps, the cause may be a mystery to you as it has been to many. Controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive.
The truth is, harmonics can destroy these motors despite their ideal balance.
ATI Performance Products, a leader in Harmonic Dampers has developed two new dampers (Part # 917994 & 917994TR) for the popular S54 & S50b32 Euro, as well as the 3 liter S50b30 Euro.
These dampers are made available exclusively through VAC, and they nearly eliminate all unstable crankshaft harmonic-vibration, allowing the engine to produce more horsepower and torque, maintain reliability, and reducing internal engine wear at the same time.
A trigger wheel comes standard on M3 Damper (Part # 917994TR) needed for M3 euro engines.
When used with the included pulley, they allow a direct replacement fit over the OEM balancer. Available in underdriven , overdriven or standard diameters . Also, configurations available for use with our dry sump kits. Both dampers have a 7" outer diameter and include OEM style timing alignment tabs.
• ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition
•Made in USA
•Eliminate problems with inline 6s fitted with lightweight clutch and flywheel assemblies
•Control destructive harmonic forces
•Reduces instances of bearing wear, accessory failure and oil pump failure
•Includes lightweight VAC Billet Crankshaft Pulley (not shown)
ATI Performance Products, Inc. is located in Baltimore, MD, and specializes in producing and maintaining high performance products for street and strip applications. Over the years ATI has earned a reputation for its cutting edge technology, attention to detail and rigorous testing under race conditions. We are proud to have them as an exclusive partner in these BMW applications.
Estimated Volumetric Shipping Weight : 5.00 Kg