BMW > Z8 > C) CHASSIS, BRAKES, SUSPENSION & STEERING UPGRADES > - Bushes/ Bearings, Mounts, Supports Etc for Suspension/ Engine/ Gearbox etc > ROGUE ENGINEERING
UPRATED TRANSMISSION MOUNTS
£85.61 inc. VAT
Product Code: rotrmounts
Click to Enlarge
Description
RE part number TM
What is a transmission mount?
The transmission mounts in a BMW are a common part that is frequently overlooked.
The transmission mount is designed to do the following:
Help stabilize the transmission under vehicle load allowing the shifter to engage into gear properly.
Isolate vibration from the drivetrain to the chassis.
Under engine load, the transmission can wiggle left and right slightly, worse when the car is being driven hard into turns. This unwanted movement may potentially causing the driver to miss shift. When we sought to have our own transmission mounts produced, we wanted them to be compliant for street use, with no compromises in performance.
What we have is a transmission mount made from Neoprene rubber, with a completely different shape than the factory mount. The hourglass shape of the factory mount is not the best for stabilizing the transmission. By changing the shape to the cylindrical shape of the Rogue Engineering mount, it reduces deflection significantly, while maintaining damping.
The Rogue Transmission Mounts are sold as a pair, and come with Grade 8 Zinc plated hardware. Unlike other aftermarket mounts, the mounting plate and studs of our mounts have been Cadmium plated to prevent corrosion.
Note: Priced as a pair.
Estimated Volumetric Shipping Weight : 1.00 Kg
What is a transmission mount?
The transmission mounts in a BMW are a common part that is frequently overlooked.
The transmission mount is designed to do the following:
Help stabilize the transmission under vehicle load allowing the shifter to engage into gear properly.
Isolate vibration from the drivetrain to the chassis.
Under engine load, the transmission can wiggle left and right slightly, worse when the car is being driven hard into turns. This unwanted movement may potentially causing the driver to miss shift. When we sought to have our own transmission mounts produced, we wanted them to be compliant for street use, with no compromises in performance.
What we have is a transmission mount made from Neoprene rubber, with a completely different shape than the factory mount. The hourglass shape of the factory mount is not the best for stabilizing the transmission. By changing the shape to the cylindrical shape of the Rogue Engineering mount, it reduces deflection significantly, while maintaining damping.
The Rogue Transmission Mounts are sold as a pair, and come with Grade 8 Zinc plated hardware. Unlike other aftermarket mounts, the mounting plate and studs of our mounts have been Cadmium plated to prevent corrosion.
Note: Priced as a pair.
Estimated Volumetric Shipping Weight : 1.00 Kg