BMW > M3 (E90/E92/E93) > C) CHASSIS, BRAKES, SUSPENSION & STEERING UPGRADES > - Coilover Suspension / Height Adjustable Spring Kits Etc > GROUND CONTROL
GROUND CONTROL COILOVER CONVERSION KIT FOR E9X M3 08-11 W/EDC
£1,238.80 inc. VAT
Product Code: 2039.01
Click to Enlarge
Description
*Kit includes everything you need to convert all four corners using your existing dampers.*
Equip your E9X BMW M3 with this Coilover Conversion kit specifically designed for M3's with EDC (Electronic Damper Control).
-Removal of stock spring seat required on front axle.
-Expected ride height change from 0 to 1.75 inches
The Kit Includes:
-Street camber plates (that allow use of EDC wires)
-Adjustable ride height conversion for the stock struts
-Front springs, 3 choices because they have to match stock damper valving.The stock damping is pretty good however.
-Front sway bar brackets for strut
-Front sway bar end link's (adjustable)
-Front bump stops
-Rear bump stops
-Rear ride height adjustment
-Rear springs, 5 choices to match front.
-Rear shock mounts (GC "hybrid" exclusive), allows use of EDC wires.
This spring kit gives you the option to customize the ride height of your vehicle. After several years of use in racing applications, Ground Control spring kits have been adapted for street use. Most other spring kits offer only one set ride height when installed. The Ground Control system's unique design allows for easy adjustment. Simply lift the corner(s) of the vehicle that you wish to adjust and spin the adjustable spring seat up or down to raise or lower the vehicle*. Ground Control spring kits are also designed to be used with either stock or aftermarket shocks.
*Some applications require the use of a provided wrench.
Springs: We are pleased to announce that Eibach has chosen Ground Control as the west coast distributor for their ERS (Eibach Race Spring) line of springs. All of our ride height adjustable kits now exclusively feature Eibach springs. All racing and street/show spring rates are available. All Eibach springs offer a lifetime warranty against spring rate change and sagging. CALL US FOR ADVICE ON SPRING RATES IF YOU NEED.
Adjusters: All adjusters consist of a threaded sleeve and adjustable spring seat. And are made using high strength 6061-T6 aluminum; anodized for greater durability and appearance. The threads on the adjusters are square cut which locks the adjustable spring seat in place under load. For further precaution, a setscrew in the adjustable spring seat can be used to secure adjustment. Upper spring perches are used to insulate the spring.
Ground Control works very hard with Eibach USA to make these springs to the standards that you demand. Lifetime guarantee on everything, not just springs. No excuses about "racing" or "special". If anything fails, while being correctly installed, it will be taken care of, period. We can only have a guarantee like this because every single part of the Ground Control Street coil-over kit is made by us or someone we trust. None of these parts are made in Taiwan. Everything is made in the USA.
Estimated Volumetric Shipping Weight : 15.00 Kg
Equip your E9X BMW M3 with this Coilover Conversion kit specifically designed for M3's with EDC (Electronic Damper Control).
-Removal of stock spring seat required on front axle.
-Expected ride height change from 0 to 1.75 inches
The Kit Includes:
-Street camber plates (that allow use of EDC wires)
-Adjustable ride height conversion for the stock struts
-Front springs, 3 choices because they have to match stock damper valving.The stock damping is pretty good however.
-Front sway bar brackets for strut
-Front sway bar end link's (adjustable)
-Front bump stops
-Rear bump stops
-Rear ride height adjustment
-Rear springs, 5 choices to match front.
-Rear shock mounts (GC "hybrid" exclusive), allows use of EDC wires.
This spring kit gives you the option to customize the ride height of your vehicle. After several years of use in racing applications, Ground Control spring kits have been adapted for street use. Most other spring kits offer only one set ride height when installed. The Ground Control system's unique design allows for easy adjustment. Simply lift the corner(s) of the vehicle that you wish to adjust and spin the adjustable spring seat up or down to raise or lower the vehicle*. Ground Control spring kits are also designed to be used with either stock or aftermarket shocks.
*Some applications require the use of a provided wrench.
Springs: We are pleased to announce that Eibach has chosen Ground Control as the west coast distributor for their ERS (Eibach Race Spring) line of springs. All of our ride height adjustable kits now exclusively feature Eibach springs. All racing and street/show spring rates are available. All Eibach springs offer a lifetime warranty against spring rate change and sagging. CALL US FOR ADVICE ON SPRING RATES IF YOU NEED.
Adjusters: All adjusters consist of a threaded sleeve and adjustable spring seat. And are made using high strength 6061-T6 aluminum; anodized for greater durability and appearance. The threads on the adjusters are square cut which locks the adjustable spring seat in place under load. For further precaution, a setscrew in the adjustable spring seat can be used to secure adjustment. Upper spring perches are used to insulate the spring.
Ground Control works very hard with Eibach USA to make these springs to the standards that you demand. Lifetime guarantee on everything, not just springs. No excuses about "racing" or "special". If anything fails, while being correctly installed, it will be taken care of, period. We can only have a guarantee like this because every single part of the Ground Control Street coil-over kit is made by us or someone we trust. None of these parts are made in Taiwan. Everything is made in the USA.
Estimated Volumetric Shipping Weight : 15.00 Kg