BMW > 3 Series (E46) > C) CHASSIS, BRAKES, SUSPENSION & STEERING UPGRADES > - Strut bars, Chassis & Subframe Reinforcement, Underchassis Protection etc > UUC MOTORWERKS
UUC E46 REAR SUBFRAME CHASSIS REINFORCEMENT KIT
£151.87 inc. VAT
Product Code: uuc-e46rscr-kit
Click to Enlarge
Description
E46 REAR SUBFRAME CHASSIS REINFORCEMENT KIT
fits: 1999-2005 BMW E46 M3/330/328/325/323
This kit is designed to strengthen the rear subframe mounting attachment points in the floorpan of the chassis. As these points weaken from the normal stress of driving, the sheetmetal in the floor cracks and eventually rips. Strengthening of this area is critical not only for safe operation in a street car, but also for optimum performance in a track or race car.
Parts list for kit:
1. Two 12mm x 1.5 bolts
2. Two front subframe mounting point Reinforcements
3. One Right rear subframe mounting point Reinforcement
4. One Left rear subframe mounting point Reinforcement
5. Two cross member spacers
6. Two trunk block off plates
IMPORTANT NOTES:
1. The entire exhaust, rear suspension, and subframe must be removed for installation.
2. Requires welding – it is very important to disconnect the battery and DME (computer) before welding. All grounding must be directly to the chassis.
3. Professional installation strongly recommended.
Estimated Volumetric Shipping Weight : 1.00 Kg
fits: 1999-2005 BMW E46 M3/330/328/325/323
This kit is designed to strengthen the rear subframe mounting attachment points in the floorpan of the chassis. As these points weaken from the normal stress of driving, the sheetmetal in the floor cracks and eventually rips. Strengthening of this area is critical not only for safe operation in a street car, but also for optimum performance in a track or race car.
Parts list for kit:
1. Two 12mm x 1.5 bolts
2. Two front subframe mounting point Reinforcements
3. One Right rear subframe mounting point Reinforcement
4. One Left rear subframe mounting point Reinforcement
5. Two cross member spacers
6. Two trunk block off plates
IMPORTANT NOTES:
1. The entire exhaust, rear suspension, and subframe must be removed for installation.
2. Requires welding – it is very important to disconnect the battery and DME (computer) before welding. All grounding must be directly to the chassis.
3. Professional installation strongly recommended.
Estimated Volumetric Shipping Weight : 1.00 Kg