BMW > M3 (E30) > C) CHASSIS, BRAKES, SUSPENSION & STEERING UPGRADES > - Strut bars, Chassis & Subframe Reinforcement, Underchassis Protection etc > UUC MOTORWERKS
UUC E30 REAR SWAYBAR REINFORCEMENT KIT
£138.02 inc. VAT
Product Code: uuc-e30rsbr-kit
Click to Enlarge
Description
UUC E30 REAR SWAYBAR REINFORCEMENT KIT
fits E30 M3 / 325 / 318 1984-1991
We offer a wide variety of metal reinforcement parts for chassis locations that are prone to stress weakening and eventual failure.
These components are recommended for street cars and essentially mandatory for track or race cars.
Many of these kits must be welded in place, and are therefore provided in bare steel suitable for finish painting after installation.
Professional installation recommended.
This kit is designed to replace and strengthen the OE rear swaybar mounting brackets. Weakening, cracking, and eventual failure occurs as a result of mileage or hard use. Strengthening of this area is critical not only for safe operation in a street car, but also for optimum performance in a track or race car.
Parts list for kit:
2 x Rear swaybar reinforcement
4 x M6 fender washer
4 x M6x25mm bolt
4 x M6x1.00 Nyloc nut
These reinforcements replace the metal swaybar bushing brackets that bolt to a pair of tabs coming off the trunk floor. The tabs are welded into place but over time, and especially with larger swaybars, the tabs will flex, bend, and eventually break. These reinforcements will work to prevent the bending and flexing but will not repair broken tabs. Inspect the tabs before installing the kit. If cracks are found in the weld or on the tabs themselves have them re-welded to the rear frame. Works with all original equipment bars or any aftermarket bars that use bushings that fit into the original brackets.
Estimated Volumetric Shipping Weight : 1.00 Kg
fits E30 M3 / 325 / 318 1984-1991
We offer a wide variety of metal reinforcement parts for chassis locations that are prone to stress weakening and eventual failure.
These components are recommended for street cars and essentially mandatory for track or race cars.
Many of these kits must be welded in place, and are therefore provided in bare steel suitable for finish painting after installation.
Professional installation recommended.
This kit is designed to replace and strengthen the OE rear swaybar mounting brackets. Weakening, cracking, and eventual failure occurs as a result of mileage or hard use. Strengthening of this area is critical not only for safe operation in a street car, but also for optimum performance in a track or race car.
Parts list for kit:
2 x Rear swaybar reinforcement
4 x M6 fender washer
4 x M6x25mm bolt
4 x M6x1.00 Nyloc nut
These reinforcements replace the metal swaybar bushing brackets that bolt to a pair of tabs coming off the trunk floor. The tabs are welded into place but over time, and especially with larger swaybars, the tabs will flex, bend, and eventually break. These reinforcements will work to prevent the bending and flexing but will not repair broken tabs. Inspect the tabs before installing the kit. If cracks are found in the weld or on the tabs themselves have them re-welded to the rear frame. Works with all original equipment bars or any aftermarket bars that use bushings that fit into the original brackets.
Estimated Volumetric Shipping Weight : 1.00 Kg