BMW > M3 (E90/E92/E93) > C) CHASSIS, BRAKES, SUSPENSION & STEERING UPGRADES > - Bushes/ Bearings, Mounts, Supports Etc for Suspension/ Engine/ Gearbox etc > UUC MOTORWERKS
Product Code: tm-race
.jpeg)
Click to Enlarge
Description
UPRATED TRANSMISSION MOUNTS BOLT THROUGH RACE RED
!!! LIFETIME WARRANTY - INCLUDING RACE USE !!!
New mechanical retention system on all UUC isolated transmission mounts (red or black) and engine mounts. This design uses a bonded end plate plus an inner plate embedded in the urethane. This inner plate prevents separation of the mount assembly even under excessive force.
Red urethane bolt-through transmission mount bushings are the strongest choice. A single bolt through the entire piece eliminates any possibility of bushing material failure even under the most abusive conditions. Offers effectively the same drivetrain motion control as a solid delrin or aluminum mount, but with some vibration isolation to reduce vibratory stress on mechanical components. Cabin vibration significantly lower than delrin/aluminum solid mounts, but still noticeable.
Vibration Absorber.
First and foremost, the purpose of a transmission mount is to isolate vibration from the interior cabin. Without it, your interior cabin noise will increase to the point where it would be uncomfortable to drive any significant amount of time.
Deflection Fighter
The transmission mount is also used to combat transmission/powertrain movement during driving. Since the transmission is connected to the back of the engine, it is the engine which is doing the twisting when one accelerates or decelerates (engine braking). Since the engine has it's own mounts, the transmission also has it's own. Whereas some movement is expected, too much movement will cause the transmission to become misaligned with the interior of the car. When the transmission is not in the same position, it may lead "mis-shifting" (shifting into the incorrect gear). Generally, a mis-shift causes an engine to over-rev and cause extensive internal damage. Especially in an E36 M3, it generally means a few thousand dollars in repairs (and that's why they call it the "money shift"!).
The Ideal Mount
The ideal transmission mount will both absorb vibration as the factory intended as well as minimize the amount of transmission movement during spirited driving. By firming up the transmission mounts, your gear shifts will become more precise than when you car was new from the factory.
UUC bushings even incorporate the small notch required for certain models including E46 330i/Ci 6-speed.
Hundreds of drivers from daily driven cars to full blown race cars have gained the benefit of the TME with near elimination transmission movement. Speedvision teams such as TC Kline, Turner Motorsport, and ERT to name a few, have all benefited from the TME. Are you next?
Fits these models:
1-SERIES:
2006-2012 E82/E88: M Coupé, 135i, 128i
3-SERIES:
2005-2012 E90/E90N/E91/E92/E92N/E93N: (all coupe/sedan/convertible) 335i/is/d, 330i, 328i, 325i, 323i
1999-2003 E46: M3, 330/Ci, 328i/Ci, 325i/Ci, 323i/Ci, 320i
1992-1999 E36: M3, 328i, 325i/is, 323i, 320i, 318i, 318ti
Z-series
2002-2008 E85/E86/E89: Z4 M3.2, Z4 35i/is, Z4 30i, Z4 3.0i/si, Z4 2.5i
1996-2001 E36/7/8 Z3: MZ3, 3.0i, 2.8, 2.5i, 2.5
5-SERIES
1997-2003 E39: M5, 540i, 530i, 528i, 525i
!!! LIFETIME WARRANTY - INCLUDING RACE USE !!!
Estimated Volumetric Shipping Weight : 1.00 Kg
!!! LIFETIME WARRANTY - INCLUDING RACE USE !!!
New mechanical retention system on all UUC isolated transmission mounts (red or black) and engine mounts. This design uses a bonded end plate plus an inner plate embedded in the urethane. This inner plate prevents separation of the mount assembly even under excessive force.
Red urethane bolt-through transmission mount bushings are the strongest choice. A single bolt through the entire piece eliminates any possibility of bushing material failure even under the most abusive conditions. Offers effectively the same drivetrain motion control as a solid delrin or aluminum mount, but with some vibration isolation to reduce vibratory stress on mechanical components. Cabin vibration significantly lower than delrin/aluminum solid mounts, but still noticeable.
Vibration Absorber.
First and foremost, the purpose of a transmission mount is to isolate vibration from the interior cabin. Without it, your interior cabin noise will increase to the point where it would be uncomfortable to drive any significant amount of time.
Deflection Fighter
The transmission mount is also used to combat transmission/powertrain movement during driving. Since the transmission is connected to the back of the engine, it is the engine which is doing the twisting when one accelerates or decelerates (engine braking). Since the engine has it's own mounts, the transmission also has it's own. Whereas some movement is expected, too much movement will cause the transmission to become misaligned with the interior of the car. When the transmission is not in the same position, it may lead "mis-shifting" (shifting into the incorrect gear). Generally, a mis-shift causes an engine to over-rev and cause extensive internal damage. Especially in an E36 M3, it generally means a few thousand dollars in repairs (and that's why they call it the "money shift"!).
The Ideal Mount
The ideal transmission mount will both absorb vibration as the factory intended as well as minimize the amount of transmission movement during spirited driving. By firming up the transmission mounts, your gear shifts will become more precise than when you car was new from the factory.
UUC bushings even incorporate the small notch required for certain models including E46 330i/Ci 6-speed.
Hundreds of drivers from daily driven cars to full blown race cars have gained the benefit of the TME with near elimination transmission movement. Speedvision teams such as TC Kline, Turner Motorsport, and ERT to name a few, have all benefited from the TME. Are you next?
Fits these models:
1-SERIES:
2006-2012 E82/E88: M Coupé, 135i, 128i
3-SERIES:
2005-2012 E90/E90N/E91/E92/E92N/E93N: (all coupe/sedan/convertible) 335i/is/d, 330i, 328i, 325i, 323i
1999-2003 E46: M3, 330/Ci, 328i/Ci, 325i/Ci, 323i/Ci, 320i
1992-1999 E36: M3, 328i, 325i/is, 323i, 320i, 318i, 318ti
Z-series
2002-2008 E85/E86/E89: Z4 M3.2, Z4 35i/is, Z4 30i, Z4 3.0i/si, Z4 2.5i
1996-2001 E36/7/8 Z3: MZ3, 3.0i, 2.8, 2.5i, 2.5
5-SERIES
1997-2003 E39: M5, 540i, 530i, 528i, 525i
!!! LIFETIME WARRANTY - INCLUDING RACE USE !!!
Estimated Volumetric Shipping Weight : 1.00 Kg