Click to Enlarge

UUC E30 M3 & all Z3 FRONT SWAYBAR REINFORCEMENT KIT

fits 1987-1991 BMW M3/325/318 (E30) and all 1994-2002 Z3

We offer a wide variety of metal reinforcement parts for chassis locations that are prone to stress weakening and eventual failure.

These components are recommended for street cars and essentially mandatory for track or race cars.

Many of these kits must be welded in place, and are therefore provided in bare steel suitable for finish painting after installation.

Professional installation recommended.

This kit is designed to strengthen the front swaybar link mounting brackets on the strut bodies. Weakening, cracking, and eventual failure occurs as a result of mileage or hard use. Strengthening of this area is critical not only for safe operation in a street car, but also for optimum performance in a track or race car.

Parts list for kit:
2 reinforcement plates


These reinforcements reinforce the metal swaybar link tabs located on the front struts.



Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

UUC E30 M3 FRONT SUBFRAME REINFORCEMENT KIT

fits: E30 1984-1991 M3/325/318

We offer a wide variety of metal reinforcement parts for chassis locations that are prone to stress weakening and eventual failure.

These components are recommended for street cars and essentially mandatory for track or race cars.

Many of these kits must be welded in place, and are therefore provided in bare steel suitable for finish painting after installation.

Professional installation recommended.

This kit is designed to repair and/or strengthen the front subframe mounting ears around the engine mount bushing attachment points. Weakening, cracking, and eventual failure occurs as a result of mileage or hard use. Strengthening of this area is critical not only for safe operation in a street car, but also for optimum performance in a track or race car.

Note: installation of this kit does require welding and access to the underside of the car.



Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

UUC E30 M3 FRONT SWAYBAR REINFORCEMENT KIT

fits E30 M3 1987-1992

We offer a wide variety of metal reinforcement parts for chassis locations that are prone to stress weakening and eventual failure.

These components are recommended for street cars and essentially mandatory for track or race cars.

Many of these kits must be welded in place, and are therefore provided in bare steel suitable for finish painting after installation.

Professional installation recommended.

This kit is designed to strengthen the front swaybar link mounting brackets on the strut bodies. Weakening, cracking, and eventual failure occurs as a result of mileage or hard use. Strengthening of this area is critical not only for safe operation in a street car, but also for optimum performance in a track or race car.

Parts list for kit:
2 reinforcement plates


These reinforcements reinforce the metal swaybar link tabs located on the front struts.



Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

UUC E30 REAR SWAYBAR REINFORCEMENT KIT

fits E30 M3 / 325 / 318 1984-1991

We offer a wide variety of metal reinforcement parts for chassis locations that are prone to stress weakening and eventual failure.

These components are recommended for street cars and essentially mandatory for track or race cars.

Many of these kits must be welded in place, and are therefore provided in bare steel suitable for finish painting after installation.

Professional installation recommended.

This kit is designed to replace and strengthen the OE rear swaybar mounting brackets. Weakening, cracking, and eventual failure occurs as a result of mileage or hard use. Strengthening of this area is critical not only for safe operation in a street car, but also for optimum performance in a track or race car.

Parts list for kit:
2 x Rear swaybar reinforcement
4 x M6 fender washer
4 x M6x25mm bolt
4 x M6x1.00 Nyloc nut


These reinforcements replace the metal swaybar bushing brackets that bolt to a pair of tabs coming off the trunk floor. The tabs are welded into place but over time, and especially with larger swaybars, the tabs will flex, bend, and eventually break. These reinforcements will work to prevent the bending and flexing but will not repair broken tabs. Inspect the tabs before installing the kit. If cracks are found in the weld or on the tabs themselves have them re-welded to the rear frame. Works with all original equipment bars or any aftermarket bars that use bushings that fit into the original brackets.

Estimated Volumetric Shipping Weight : 1.00 Kg