Crest Automotive Tuning - A) ENGINE PERFORMANCE (See also forced induction & remapping sections)

Product Code: bmcrpfoem

Click to Enlarge

E60 M5
Click to Enlarge

High flow / high performance air filters that simply replace the factory original versions within the factory airbox.

PERFORMANCE
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

ADVANCED TECHNOLOGY
BMC technical staff has developed a particular production system based on soft rubber moulding which produces the familiar BMC red filters. They are made in one single piece with no welded joints in the corners, thus avoiding breaking risks. This system, called "Full Moulding" comes from R&D in F1 and it is significant of BMC air filters' technical and quality specifics.

PLEASE REFER TO EXCELL PRICE AND APPLICATION LIST BY CLICKING THE LINK BELOW.

BMC DIRECT REPLACEMENT PANEL FILTERS PRICE LIST

Product Code: cln52itkmnf90

Click to Enlarge

PLEASE NOTE, Regarding the injectors, you can install 2 types of different length of injector, 14mm variety.
Click to Enlarge

Injectors
Click to Enlarge

Click to Enlarge

BMW N52 Performance Intake Manifold & Fuel Rail set

- Very high quality engineering & construction
- Improves volumetric flow and performance
- Available in Silver and Black.
- To suit OEM 90mm size throttle body size
- Fuel rails included
- "Pug and Play" installation to the factory engine layout
- Uses OEM specification / size injectors
- O-ring seals replace the OEM metal gaskets for a better seal

NOTES :
Clumate fuel rails are not universal ones, and they ONLY fit Clumate's intakes, they wont fit even the OEM intakes. Other brands fuel rails will not fit Clumate's intakes either.

Product Code: cln54itkmnf

Click to Enlarge

PLEASE NOTE, Regarding the injectors, you can install 2 types of different length of injector, 14mm variety.
Click to Enlarge

Injectors
Click to Enlarge

DYNO 2
Click to Enlarge

INSTALLATION
Click to Enlarge

Click to Enlarge

High Performance Intake Manifold, fuel rail and throttle Body kit, for the N54 engine; VERSION 1. Direct Port Injection Design.
(Please also see alternate design Version 2 also listed in this section, equal performance but different aesthetics etc.)

- Very high quality engineering & construction
- Improves performance
- Available in Silver and Black.
- Fuel rails included
- "Plug and Play" installation to the factory engine layout and charge / boost pipes
- Uses OEM specification / size injectors
- O-ring seals replace the OEM metal gaskets for a better seal .

NOTES Regarding Injectors and rails :

- There are TWO options regarding injectors for this conversion as follows :
1) Choose the complete intake Kit which includes injectors ports in the plenum, together with the dedicated fuel rail to install longer aftermarket performance injectors.
2) Choose the Intake manifold option Without injector ports on the plenum, to replace the OEM manifold only but retain OEM fuel rail.

- Clumate fuel rails are not universal ones, and they ONLY fit Clumate's intakes, they wont fit even the OEM intakes. Other brands fuel rails will not fit Clumate's intakes either.

Product Code: cln54itkmnf80

Click to Enlarge

PLEASE NOTE, Regarding the injectors, you can install 2 types of different length of injector, 14mm variety.
Click to Enlarge

Injectors
Click to Enlarge

Click to Enlarge

High Performance Intake Manifold, fuel rail and throttle Body kit for the N54 engine, VERSION 2, PORT INJECTION DESIGN.
(Please also see alternate Version 1 also listed in this section, equal performance but design is more similar to OEM) .

- Very high quality engineering & construction
- Improves performance
- Available in Silver and Black.
- Fuel rails included
- "Plug and Play" installation to the factory engine layout
- Uses OEM specification / size injectors
- O-ring seals replace the OEM metal gaskets for a better seal .

NOTES Regarding Injectors and rails :

- There are TWO options regarding injectors for this conversion as follows :
1) Choose the complete intake Kit which includes injectors ports in the plenum, together with the dedicated fuel rail to install longer aftermarket performance injectors.
2) Choose the Intake manifold option Without injector ports on the plenum, to replace the OEM manifold only but retain OEM fuel rail.

- Clumate fuel rails are not universal ones, and they ONLY fit Clumate's intakes, they wont fit even the OEM intakes. Other brands fuel rails will not fit Clumate's intakes either.

Product Code: cln55intmnf

Click to Enlarge

PLEASE NOTE, Regarding the injectors, you can install 2 types of different length of injector, 14mm variety.
Click to Enlarge

Injectors
Click to Enlarge

Click to Enlarge

High Performance Intake Manifold, fuel rail and throttle Body kit for the N55 engine, VERSION 1, Direct Port Injection design.
(Please also see alternate design Version 2 also listed in this section, equal performance but different aesthetics etc. )

- Very high quality engineering & construction
- Available in Silver and Black.
- 80/90mm size throttle body to your choice (Please specify when ordering)
- Fuel rails included
- "Plug and Play" installation to the factory engine layout
- Uses OEM specification / size injectors
- O-ring seals replace the OEM metal gaskets for a better seal .

NOTES Regarding Injectors and rails :

- There are TWO options regarding injectors for this conversion as follows :
1) Choose the complete intake Kit which includes injectors ports in the plenum, together with the dedicated fuel rail to install longer aftermarket performance injectors.
2) Choose the Intake manifold option Without injector ports on the plenum, to replace the OEM manifold only but retain OEM fuel rail.

- Clumate fuel rails are not universal ones, and they ONLY fit Clumate's intakes, they wont fit even the OEM intakes. Other brands fuel rails will not fit Clumate's intakes either.

Video of N55 Intake manifold installed :

Product Code: cln55itkmnf80

Click to Enlarge

PLEASE NOTE, Regarding the injectors, you can install 2 types of different length of injector, 14mm variety.
Click to Enlarge

Injectors
Click to Enlarge

Click to Enlarge

High Performance Intake Manifold, fuel rail and throttle Body kit for the N55 engine, VERSION 2. PORT INJECTION DESIGN
(Please also see alternate design Version 1 also listed in this section, equal performance but more similar design to OEM.)

- Very high quality engineering & construction
- Improves performance
- Available in Silver and Black.
- Fuel rails included
- "Plug and Play" installation to the factory engine layout
- Uses OEM specification / size injectors
- O-ring seals replace the OEM metal gaskets for a better seal .

NOTES Regarding Injectors and rails :

- There are TWO options regarding injectors for this conversion as follows :
1) Choose the complete intake Kit which includes injectors ports in the plenum, together with the dedicated fuel rail to install longer aftermarket performance injectors.
2) Choose the Intake manifold option Without injector ports on the plenum, to replace the OEM manifold only but retain OEM fuel rail.

- Clumate fuel rails are not universal ones, and they ONLY fit Clumate's intakes, they wont fit even the OEM intakes. Other brands fuel rails will not fit Clumate's intakes either.

Video of N55 Intake manifold installed :

Product Code: s71344

Click to Enlarge

Throttle body spacers are cnc machined from billet aluminium, resulting in a premium quality product for your N54 or N55 engine (only for E8X E9X).

Benefits:

- Increase in MPG.

- Increase in both horsepower and torque.

- Improved throttle response.

- Eliminates unpleasant whistling noise.

Estimated Volumetric Shipping Weight : 3.00 Kg

Product Code: sg71324

Click to Enlarge

The Dynamic Air Scoops allow to direct more fresh cool air from your BMW's centre/nose grills to your intake. These two "scoops" are installed behind the front grills to direct more airflow into the factory intake snorkel used on the E90/E92/E93; 328i, 328xi, 335i & 335xi and M3.

Scoops are a direct bolt-in installation. When combined with a higher flowing filter, such as the stock replacement filter or twin filter system (335i & 335xi), these scoops increase the benefits of a higher efficiency filter by guiding more cool, fresh external air directly into the intake snorkel. Both the 3.0 twin turbo models and the 4.0 V8 models will benefit from this added air flow that will generate higher horsepower and torque.

Also included are instructions and required hardware for a simple installation.

This product is suitable for the following models:
E90/E92/E93; 328i & 328xi
E90/E92/E93; 335i & 335xi (N54 engine only)
E90/E92/E93; M3

Estimated Volumetric Shipping Weight : 3.00 Kg

Product Code: grpm

Unfortunately we can no longer sell or recommend Gruppe M due to recent negative experiences, including:
- Extremely poor service.
- Stealing customers by making direct sales to them behind our back.
- Dishonesty.
- Shipping intake kits with missing parts and refusing to correct their oversight.

Estimated Volumetric Shipping Weight : 1.00 Kg

Product Code: hopdisa-1

Click to Enlarge

Needing to simplify your M54 intake system?
This plug will allow you to completely remove the often troublesome DISA system from the manifold.

The design has been tested to over 1.5b of positive pressure and seals using a high-temperature- and oil-resistant vitton o-ring.

This plug fits the majority of intake manifolds, however - there is a rare chance that your manifold holds a smaller diameter of DISA - These blanks are 61mm diameter, please check your manifold if you’re unsure of the size on your manifold.

Features :

-CNC-machined billet aluminium
-High-temp, oil-resistant vitton o-ring
-Available with or without a MAP sensor mount (fits 3b MAP sensors from Bosch)
-Maximum 10 minutes to fit

Estimated Volumetric Shipping Weight : 0.50 Kg

Product Code: 1992010

Click to Enlarge

Macht Schnell is proud to offer a high quality, high performance and high protection original equipment direct replacement air filter – specifically for your N54 powerplant. Combined with our Intake Charge Scoops (ICS), this matched combo will provide maximum air delivery for your N54 engine with noticeable power gains.

The ICS pieces are constructed from nearly indestructible polyethylene, which prevents heatsoak and will not bend, distort or rust after years of use. The inside of the ICS pieces have a smooth radius with a gloss finish to direct airflow into the intake snorkel while the outer edged are black textured to emulate factory pieces, giving a stealth appearance.

Intake Charge Scoops (ICS) Features:

- Aids in additional airflow to factory airbox, additional gains when combined with Macht Schnell High Performance Filter
- Polyethylene construction, nearly indestructible
- Elegant textured exterior, smooth gloss inner for maximum air delivery with no restriction
- Will not rust, or deteriorate over time

- Sold as a set

Each Macht Schnell filter is designed to the specific requirements of your engine it will be protecting to deliver top-level performance with maximum flow and filtering. Pleat depth, quantity and filtering media configuration are tuned to provide the best possible performance without compromising the protection required for today’s high tolerance engines.

Our N54B30 High Performance Panel Filter is the ultimate first step for someone that wants to maintain and improve upon the highly engineered stock intake systems. This is an engineered filter constructed specifically for your BMW to deliver maximum airflow.

Maintaining proper CFM flow and particle capture efficiency is a delicate balancing act. Filters that flow well usually do not protect as well and vice versa. Macht Schnell has mastered the formula to achieve this elusive perfect balance and so your engine assets will perform better without sacrificing protection.

N54B30 High Performance Panel Filter Features:

- Direct replacement for your original equipment filter panel
- Washable/reusable cotton gauze which allows more airflow
- Sturdy sidewall construction ensures filter will last the life of the vehicle
- Tight leak proof seal with your factory air box
- Deepest multi-layered pleats increase air flow and maintain critical protection levels, while still providing maximum air delivery
- Maintains OEM filter’s 99% debris collection efficiency to meet ISO 5011 standards
- Maintains BMW engineered pressurized air box and OEM appearance

Fits the below Models:
2007-2010 E9X 335i
2011+ E9X 335is

Estimated Volumetric Shipping Weight : 10.00 Kg

Product Code: manhart-2

MANHART MH2 GTR
Click to Enlarge

MANHART MH5 800
Click to Enlarge

MANHART MH3 600
Click to Enlarge

MANHART MH2 Performance Kit
Click to Enlarge

MANHART MH8 800
Click to Enlarge

This page is still under construction. For more information, including product details, pricing and availability, please call or email us now.
Please note, prices may change subject to exchange rates and availability.

We now offer the full range of MANHART BMW performance parts, as an official MANHART distributor.
MANHART began perfecting and optimising BMWs more than three decades ago, offering unparalleled experience and expertise in the field. MANHART’s primary focus has always been the optimisation of BMW M cars, and this shines through in the products they create.
Many of MANHART’s most famous projects are technology swaps – a V8 E30, or an S85 in an E92 M3 – but they also offer a wide range of excellent upgrades, including carbon parts for exterior and interior uses; intake and exhaust systems; an extensive range of performance kits, and their specially designed MHTRONIK engine upgrade box.
As an official distributor for MANHART, we can provide the full range of MANHART BMW performance products, to suit whatever upgrades you are interested in. Contact us now for more information on pricing and specifics.
If you get a cheaper offer elsewhere, come back to us; we will always try to beat any other genuine quote!

Estimated Volumetric Shipping Weight : 1.00 Kg

Product Code: hopmap-1

Click to Enlarge

Under forced induction use, the original MAF from BMW cannot read high enough air flow values for reliable use at high load. The MAP conversion is a simple, cheap and reliable alternative which takes less than 10 minutes to convert to.

Unlike with earlier versions of this kit, you now have no need to open the ECU and solder and de-solder certain pins - everything is “plug and play” and can easily be returned to standard at a later date if required.

Please note: This conversion can currently only be used with the Siemens MS43 ECU (standard for most M54 engines).
You will need to tune the engine ECU after fitting this kit.
If you choose not to use the MAP sensor mount, note that the sensor needs to receive pressure reference from the manifold itself - it cannot be mounted downstream from the throttle body.

What’s included:

-MAF to MAP conversion loom (plug in and forget - no soldering required)
-Genuine Bosch MAP sensor
-DISA blanking plate with MAP sensor mount (fits all M54B30 intake manifolds - check the diameter of the DISA hole if you’re using an M54B28, B25 or B22 manifold before ordering)
-Step-by-step instructions for completing the conversion (you will have to move some pins inside the ECU box, but do not have to open the ECU housing itself.)
-Works for both forced induction and normally aspirated builds

Estimated Volumetric Shipping Weight : 0.50 Kg

Click to Enlarge

E92 M3
Click to Enlarge

Click to Enlarge

RED SCOOPS FITTED TO E9X M3
Click to Enlarge

*THIS PAGE LISTS THE RAM INTAKE KIT SCOOPS ONLY (NO AIR FILTERS), FOR THE M3 AND 335I MODELS ONLY.
PLEASE REFER TO VARIATIONS SECTION (BY USING THE RED LINK BUTTON AT TOP RIGHT) TO SEE OTHER KIT OPTIONS FOR WITH AIR FILTERS AND ALSO KITS FOR NON M MODELS .

Your E9X M3 s / 335I s main source of air is a 2.5" or 3" opening behind the front center grill. The problem is that the openings are sideways. Head on airflow will find its way to the radiator and oil cooler while the engine tries to pull in its share of air that is passing by.

The RPI ram air scoops capture and channels air directly into the factory intake ducting. This encourages pressurization of the intake boxes with cool and dense air. Our complete system has a proven advantage in that the source of air is completely from the outside. Induction type systems suffer from extreme under hood temperatures which results in a loss of power. Heat shielding around induction filters are only good for blocking radiant heat but does not seal the intake filters off from under hood heat.

Includes :

- 2 x ram soops
- mounting hardware

Scoops available in red or black, please specify preference.

NOTE: Please see Variations section by clicking red link button at top right of this listing for alternate listing for the complete intake kit including BMC hi - flow replacement air filters, and for Non - M applications .

INSTALL GUIDE

PLEASE NOTE : Prices can vary according to Global currency exchange rates, so please contact us if you see same item cheaper, we will beat any other quote !

Estimated Volumetric Shipping Weight : 2.00 Kg