Crest Automotive Tuning - K) SPECIALIST TOOLS

Product Code: agacarbremoto

Click to Enlarge

AGA CARBON REMOVAL HOOK TOOL

Addressing N62 carbon build up in the secondary air injection system

Problem:
Carbon build up in the secondary air injection system of the N62 engine that will not come clean with the use of the AGA N62 Secondary Air Cleaning Kit.

Solution:
With the All German Auto Carbon Removal Hook Tool you can go into the exhaust port and open up the air passages mechanically.

Benefits:
Engine does not need to be removed which saves the technician 15-16 hours of labor.
The tool is inexpensive and an absolute repair to an otherwise very expensive repair.

Parts included with the kit:
AGA Carbon Cleaning Hook Handle
AGA Carbon Cleaning Hook Blade: #AGA-N62-CRB

Estimated Volumetric Shipping Weight : 2.00 Kg

Product Code: agacleanerfxcab

Click to Enlarge

A replacement Flex Cable for the AGA Secondary Air Cleaner Kit.

Estimated Volumetric Shipping Weight : 2.00 Kg

Product Code: agachlotooln62

Click to Enlarge

AGA N62 CHAIN LOCK TOOL

AGA Tools has manufactured a N62 Chain Lock Tool to prevent the engine from turning over during a valve stem seal repair.

Our N62 Chain Lock tool was developed based on feedback we received from technicians who have purchased our N62 Valve Stem Seal Tool Kit.

By setting the engine to TCD and pressuring the cylinder, if the TDC is not perfectly aligned the engine can turn over in either direction. Our N62 Chain Lock Tool will prevent this from happening. Before the cylinder is pressurized, insert the chain lock tool to lock the chain and inhibit it from turning over.

Not only does the chain lock tool prevent the engine from tuning over, but it also helps prevent accidents like fingers getting caught, scratching camshafts, or damaging engine components. All in all, the N62 Chain Lock Tool will make the job easier for the technician.

Estimated Volumetric Shipping Weight : 1.00 Kg

Product Code: agavaost

Click to Enlarge

N62 Valve Stem Seal Complete Tool Kit.

Valve stem seals, gaskets etc., are NOT included.

Please see this link to access the AGA VALVE STEM REPLACEMENT SEAL KIT FOR THE N62 V8 ENGINE

Problem: You have a smoking BMW due to bad valve stem seals. The valve stem seal problem is that the old valve stem seal becomes hard over time and doesn’t provide the proper seal between the seal and stem. This allows oil to pass through and enter the combustion chamber and exhaust. In addition, the old style seal does not seal on the inside to the guide, like the newer updated style seal. This creates an oil pocket underneath the seal that oil can accumulate in and make the problem worse. The oil consumption here is bad for a lot of different reasons. Obviously smoking, but also decreased cat life and blockage of secondary air ports. We’ve seen a number of cars that have set CAT inefficiency codes and these codes can go away if you replace the seals if done in time.

Solution: Perform the Valve Stem Seal Repair without removing the intake or exhaust cams by using the AGA N62 Valve Stem Seal Tool Kit. This repair not only saves you hours of labor but also eliminates having to have thousands of dollars invested in Cam timing tools. This is one of the few tools a shop can buy and recover the cost already on the 1st job performed.

Benefit: Eliminates smoking from exhaust, reduces risk of damaging cat converters and plugging secondary air injection. It also allows the car to pass Smog. No need to remove Intake or exhaust cams. No need to buy expensive valve timing tool. No risk of setting the cam timing wrong.

Please see this link to access the AGA VALVE STEM REPLACEMENT SEAL KIT FOR THE N62 V8 ENGINE

Estimated Volumetric Shipping Weight : 2.00 Kg