Click to Enlarge

The benefits of a Solid Lifter Conversion Kit are great!

Also know as a "Cam Follower Kit" this kit is designed to replace the factory cam followers giving you a lighter, more reliable valve train without any problems when running aggressive cams.

First, since our kit is the lightest on the market, it allows for best throttle response, and very little stress on the valve train. This lightness also allows the lifters (followers) to follow the cams more closely with less pressure (less wear); allowing you to rev to higher RPMs with less risk.

Another important benefit of solid lifters is the prevention of hydraulic lifters 'pumping up' in high rev situations and allowing damage to the valve train and possibly pistons.

This is the kit to use when using full racing-spec camshafts.

Our kit consists of:

- (32) Lightweight Solid Lifters
- Lash Caps; (16)3mm,(16)3.5mm

VAC Tech Note: "Lifter" is a slang term for "Cam Follower", they are for all conversational purposes, the same.



Estimated Volumetric Shipping Weight : 10.00 Kg

 

Click to Enlarge

Factory BMW timing chains can hold up to just about anything and often last the entire life of a standard vehicle without needing replacement.

However, when building an engine for performance use; the best is always taken into consideration, especially when the cost is very close to OE.

These German-made chains are manufactured to a higher tensile strength than OE for greater timing accuracy and longevity.

A fresh timing chain is recommended on performance rebuilds, and when they are available for a specific engine, these are the same chains we use in our builds.

- Items listed as 'Timimg chain' are for the engine chain only
- Items listed as 'Kits' include Timing Chain(s) for engine AND oil pump.

(Not available for all BMW applications)

*PLEASE CLICK ON RED "VARIATIONS" LINK BUTTON AT TOP RIGHT OF PAGE TO SEE ALL OPTIONS. *

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Schrick are Europe's leading manufacturer of camshafts and performance valve gear, supplying the OEM parts for many manufacturers as well as valve gear for many of the worlds top racing teams including Formula 1.

We have been Official UK agents for all Schrick products since 1997.

Schrick offer a large range of performance camshafts of different specifications, for many different vehicle marques.

If you refer to the Variations Section by using the red button at top right of this page you can see all the listings and prices for BMW camshafts for your, chosen BMW model; please call us for details on non - BMW and valve gear.

** PRICES MAY VARY DUE TO EURO EXCHANGE RATE FLUCTUATIONS, BUT WE WILL ALWAYS BEAT ANY OTHER GENUINE QUOTE.

As well as the prices listed in the Variations section, below here is a link to a "live" excel price list, that automatically updates prices when you open it according to the days Euro exchange rate; if the "Enable" tab appears on this list please click on it to activate the update process.

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

We offer the full range of the world renowned Schrick uprated valve train and special products such as :

- Valves (OE and oversize)
- Valve Springs
- Collets
- DLC coated followers
- Retainers
- Valve Keys

This section is still under construction, meanwhile please phone or E-Mail us for info and prices, WE WILL BEAT ANY OTHER QUOTE .

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Located in San Jose, California in the heart of Silicon Valley, Supertech was born from the same fertile ground as many other companies in this area utilizing cutting edge technology to fuel growth.

Supertech fuses this technology with passionate people and over 30 years of experience in creating the highest performance valves and valve train components available.

Supertech manufactures superior valves and valve train components for virtually every engine and type of use.
Whether it’s Drag Racing, Rally, Road Racing or any other type of motorsport, Supertech is sure to have the perfect performance solution for your application. If not, we are always willing to work with you to custom manufacture the solution that is just right for you.

- Valves
- Valve springs
- Retainers (steel and titanium)
- Lash caps
- Followers
- Guides
- Pistons
- Con Rods
- Head gaskets

Crest is an official Agent for Supertech, and we will try and BEAT ANY OTHER QUOTE !
Please call or E-Mail us to discuss your requirements and prices etc, our honest advice is always Free !



Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

These Valve Spring Kits feature a dual spring configuration capable of turning @ 12,000 RPM for that added piece of mind (Over-rev/Mis-shift, going deep into a corner).

The Dual-Spring concept,superior by design.
By having an interference fitment of two springs, harmonic resonance is dampened across the RPM range. Also, the secondary spring acts as a safety mechanism: if something should happen to one spring, the other prevents the valve from dropping into the combustion chamber. These springs are capable of handling much higher lift, even the most aggressive of cams like the Schrick 320 degree cams are no problem.

After rigorous testing in race engines over 3 years, this Valve Spring Kit still tests within 2% of their original rate. Hands down these are some of the finest springs available for any BMW.

Kit includes:
-24 High Performance Dual Valve Springs
-24 Titanium Valve Retainers
-Spring Seats (where applicable)

*Note: Due to the nature of titanium retainers, they are ideally suited for Race engines that will see consistent High RPM usage. It is only recommended they be installed in a valve train that will be inspected from time to time. Our Steel alloy retainers are a great alternative choice for a street or track oriented car whose engine will not be internally inspected often.

PRICE EXAMPLES (PLEASE CALL TO ORDER / DISCUSS) :

ENGINE TYPE

- M50/50/52/54 6 CYL £800.00
- M60 / 62 V8 £ 1020.00

PLEASE CALL FOR OTHER MODELS .

Estimated Volumetric Shipping Weight : 5.00 Kg