Click to Enlarge

Adjustable Cam Pulley for BMW M20 engine.

Nuke Performance Adjustable Cam Pulleys allow for fine tune adjustments to cam timing to maximize performance.

Adjustments can be made to tune an engine’s power band to an optimum RPM range for Different application.

The pulley is hard anodized for long life and are CNC-machined from 6082 aluminum alloy.

Three M6 bolts are fastened with helicoil inserts for long durability.

There is also hard washers to make sure the pulley do its job on the racetrack or drag race and do not lose your tuned settings even under hard pressure.

Technical information :
• CNC manufactured from aluminium alloy 6082.
• The pulley is hard anodized for long life.
• Three M6 bolts are fastened with helicoil inserts for long durability.
• Tightening torque 17 NM.
• Stainless steel washer disperses the pressure in order to avoid changes in the settings.
• Laserengraved.

Measurements :
Depth : 30 mm
Diameter : 124 mm
Weight : 450 g

Estimated Volumetric Shipping Weight : 2.00 Kg

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

replacement/perf/race. This is a billet valve cover for your M10. Machined here in the USA from 6061-T6 Billet aluminum. Includes a machined cap (o-ring sealed), and a 3/8 NPT breather bung. SPECIAL ORDER ONLY, please email with questions.

PLEASE SEE PRICE LINK BELOW, PLEASE CONTACT US FOR BEST PRICING AS SUBJECT TO CURRENCY EXCHANGE RATES


Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

We are a long time official dealer for the Belgian Cat Cam range of products, a long established and trusted brand.

Whether it’s fast road, rally, rallycross, circuit or drag racing, if you’re looking for improved engine performance then Cat Cams has plenty to offer.
With a catalogue cover over 4000 part numbers for camshafts alone, Catcams has a huge range of profiles allowing us to select one to match your exact needs.

They also offer many other valvetrain components such as : -
- Valve springs
- Retainers
- Vernier wheels
- Valves
- Followers / rockers
- Lash caps

We offer their full range for all makes and models, we will soon add more details and listings but meanwhile please E-Mail us for any info and best prices .

We will beat any other price !

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Upgrade part. We use this adjustable cam gear to adjust cam timing and to make sure we have ample piston to valve clearance on race motors. You can also move the power band slightly by changing cam timing (provided that you have the necessary piston to valve clearance to do so). Our sprocket moves the timing either -1.5, +1.5 or +2.5 degrees. These are made in the USA and heat treated for durability.

PLEASE SEE PRICE LINK BELOW, PLEASE CONTACT US FOR BEST PRICING AS SUBJECT TO CURRENCY EXCHANGE RATES

Estimated Volumetric Shipping Weight : 4.00 Kg

 

Click to Enlarge

Upgrade part. We use this adjustable cam gear to adjust cam timing and to make sure we have ample piston to valve clearance on race motors. You can also move the power band slightly by changing cam timing (provided that you have the necessary piston to valve clearance to do so). Our sprocket moves the timing either -1.5, +1.5 or +2.5 degrees. These are made in the USA and heat treated for durability.

NOTE: Given the rising cost of the OEM cam gear, this serves as a great replacement option.

PLEASE SEE PRICE LINK BELOW, PLEASE CONTACT US FOR BEST PRICING AS SUBJECT TO CURRENCY EXCHANGE RATES

Estimated Volumetric Shipping Weight : 4.00 Kg

 

Click to Enlarge

Various high quality valves offered for the 2002 engines by Ireland Engineering :

-Exhaust Valve for M10 - Stock 38mm | [02exvalve]
-Exhaust Valve - 38mm for M10 - Stainless Steel | [02exvalvess]
-Oversize Exhaust Valve - 39mm for M10 - Stainless Steel | [02exvalvess-39mm]
-Intake Valve for M10 - Stock 46mm | [02invalve]
-Intake Valve - 46mm for M10 - Stainless Steel | [02invalvess]
-Oversize Intake Valve - 47mm for M10 - Stainless Steel | [02invalvess-47mm]

PLEASE SEE PRICE LINK BELOW, PLEASE CONTACT US FOR BEST PRICING AS SUBJECT TO CURRENCY EXCHANGE RATES

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Replacement/performance/race. Late style Valve Guides for your M10 cylinder head. The late style guides allow you to run dual valve springs (but are still compatible with single springs) and the late style Valve Stem Seals which use a nice Viton seal (see related listing). These are ideal for any M10 rebuild.

Our valve guides are made to exceed all OEM specs, right here in the USA. The Manganese-bronze alloy used features the highest heat transfer rate of any bronze valve guide alloy.

Important Your machinist must specify the proper size needed, do not assume you need the standard size.

*Picture also shows the valve stem seal and valve which are not included in this listing.

PLEASE SEE PRICE LINK BELOW, PLEASE CONTACT US FOR BEST PRICING AS SUBJECT TO CURRENCY EXCHANGE RATES

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

high-strength Chromoly steel valve spring retainers, these fit both single and dual springs. While not as light-weight as the titanium, these are perfect (higher strength and durability over OEM) for a street-performance/hotrod engine build.

Made in the USA.

Options :

-M10 Valve Spring Retainers - Chromoly (for single or dual springs) | [m10retainer] SET = 8
-M10 Valve Spring Retainers - Titanium (for single or dual valve springs) | [02titanmretainers] SET = 8

PLEASE SEE PRICE LINK BELOW, PLEASE CONTACT US FOR BEST PRICING AS SUBJECT TO CURRENCY EXCHANGE RATES

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Upgrade part. Oversize eccentrics are often required to adjust the valves to spec when using a cam with a smaller base circle (typical on regrind cams) I like them better than lash caps. These eccentrics work on M10, M20 and M30 engines.

Specification: .028" additional adjustment at the cam.

PLEASE SEE PRICE LINK BELOW, PLEASE CONTACT US FOR BEST PRICING AS SUBJECT TO CURRENCY EXCHANGE RATES

Estimated Volumetric Shipping Weight : 2.00 Kg

 

Click to Enlarge

Upgrade part. On factory M10 cylinder heads, the rockers are held in position by a spring - and at high rpm, that spring may allow the rocker to move in relation to the valve stem (sometimes enough to walk off the valve stem which quickly results in a broken rocker arm). With rocker arm locks, you eliminate the spring and positively locate the rocker arm. Locks also make head assembly simpler than with thrust springs. We use these on all our performance engines.

M10 4cyl. engine: order 8 for complete set.
M30 6cyl. engine: order 12 for complete set.

PLEASE SEE PRICE LINK BELOW, PLEASE CONTACT US FOR BEST PRICING AS SUBJECT TO CURRENCY EXCHANGE RATES

Estimated Volumetric Shipping Weight : 2.00 Kg

 

Click to Enlarge

Performance and racing. Our mechanical tensioner replaces the factory hydraulic tensioner to provide a more positive and constant tension on the timing chain (less chance for valves to hit pistons where clearances are tight). We use these on all our race and high performance motors, but it can also be used to replace worn factory units. Note: It is best to check the tension often - mechanical tensioners are not recommended for those who think they can simply install it and ignore it.

PLEASE SEE PRICE LINK BELOW, PLEASE CONTACT US FOR BEST PRICING AS SUBJECT TO CURRENCY EXCHANGE RATES

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Click to Enlarge

Full range of high quality valve springs, single and double, offered as follows :

-Single Valve Springs - Heavy Duty - M10 | [02vsHD] SET = 8
-Dual Valve Springs - Race - M10 | [02vsdual] SET = 8

PLEASE SEE PRICE LINK BELOW, PLEASE CONTACT US FOR BEST PRICING AS SUBJECT TO CURRENCY EXCHANGE RATES

Estimated Volumetric Shipping Weight : 2.00 Kg

 

Click to Enlarge

Performance / Racing part

NOTE: Each valve uses 2 collets, for a full set order:
-M10 engine: qty x16
-M30 engine: qty x24

PLEASE SEE PRICE LINK BELOW, PLEASE CONTACT US FOR BEST PRICING AS SUBJECT TO CURRENCY EXCHANGE RATES

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Schrick are Europe's leading manufacturer of camshafts and performance valve gear, supplying the OEM parts for many manufacturers as well as valve gear for many of the worlds top racing teams including Formula 1.

We have been Official UK agents for all Schrick products since 1997.

Schrick offer a large range of performance camshafts of different specifications, for many different vehicle marques.

If you refer to the Variations Section by using the red button at top right of this page you can see all the listings and prices for BMW camshafts for your, chosen BMW model; please call us for details on non - BMW and valve gear.

** PRICES MAY VARY DUE TO EURO EXCHANGE RATE FLUCTUATIONS, BUT WE WILL ALWAYS BEAT ANY OTHER GENUINE QUOTE.

As well as the prices listed in the Variations section, below here is a link to a "live" excel price list, that automatically updates prices when you open it according to the days Euro exchange rate; if the "Enable" tab appears on this list please click on it to activate the update process.

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Located in San Jose, California in the heart of Silicon Valley, Supertech was born from the same fertile ground as many other companies in this area utilizing cutting edge technology to fuel growth.

Supertech fuses this technology with passionate people and over 30 years of experience in creating the highest performance valves and valve train components available.

Supertech manufactures superior valves and valve train components for virtually every engine and type of use.
Whether it’s Drag Racing, Rally, Road Racing or any other type of motorsport, Supertech is sure to have the perfect performance solution for your application. If not, we are always willing to work with you to custom manufacture the solution that is just right for you.

- Valves
- Valve springs
- Retainers (steel and titanium)
- Lash caps
- Followers
- Guides
- Pistons
- Con Rods
- Head gaskets

Crest is an official Agent for Supertech, and we will try and BEAT ANY OTHER QUOTE !
Please call or E-Mail us to discuss your requirements and prices etc, our honest advice is always Free !



Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

These Schrick rocker arms are made from a harder, more durable material than the factory items and incorporate a unique adjustment mechanism for more accurate/custom valve operation settings .
For the M10 and M30 engines
Prices vary according to quantity and application and if being purchased with any other valvetrain parts, please call or
E-Mail us for more info.

We will beat any other prices !

Estimated Volumetric Shipping Weight : 1.00 Kg