Click to Enlarge

WHAT IT DOES
AEM’s 8 Channel digital multi-channel Twin-Fire Ignition is a multiple-spark twin-capacitive discharge ignition system. The Twin Fire ignition delivers full energy to the spark plug at engine speeds exceeding 10,000 RPM, regardless of the time between ignition events, ensuring that pressurized fuel mixtures are thoroughly ignited. Standard inductive ignition systems typically produce around 250 volts on the coil primary. The Twin Fire's capacitive discharge ignition (CDI) produces a fast, high energy pulse that is applied to the ignition coil that is over 500 volts. This higher primary voltage is what allows the Twin Fire to produce a much higher spark voltage. A typical ignition coil (1:100 turns ratio) with an inductive ignition will produce about 25,000 volts to the spark plug, but using the Twin Fire with the same coil will produce 50,000 volts or more at the spark plug.

WHY YOU WANT ONE
If you have either a high compression, high boost, high RPM or a high horsepower car that demands a lot of spark energy, the AEM Twin Fire is an ideal solution for your ignition system needs.

PRODUCT FEATURES

-Works with coil-on plug and distributed spark systems
-540v primary/54,000v secondary voltage energy
-175-189mJ spark energy per capacitor
-Multi-Strike capability of up to 10 sparks per ignition trigger (20 degrees)
-Smallest (5.5” x 4.625” x 1.375”) and lightest (1.7lbs) CDI on the market
-The 30-2820 is for Five, Six and Eight Cylinder Engines
-Full spark energy with battery voltage as low as 9v
-Tachometer output included
-Extruded enclosure

TECHNICAL FEATURES

Outputs
Operating Voltage: 8-18 volts, negative ground
Operating Current: 12.0 Amps @ 10,000 RPM
RPM Capability: 14,000 RPM, 8ch @ 14 volts
Ignition Inputs: 5,6,7,8 - rising or falling edge
Ignition Outputs: 8
Energy Storage Caps: 1
LED Indicator: Ignition Trigger
Tach Output: +12v square wave
Multi-Strike Duration: ~20 degrees
Energy Output Max: 175-189 milliJoules per spark
Output Voltage: Primary: 500-540 volts
Secondary (assume 100:1): 50,000 to 54,000 volts

Size 5.5"L x 4.6"W x 1.4"H
Weight 1.7 Lbs

PLEASE SEE PRICE LIST LINK BELOW (MS EXCEL)

Estimated Volumetric Shipping Weight : 3.00 Kg

 

E46 318 DYNO PLOT
Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

"BEFORE PLASMA COILS" DYNO PLOT
Click to Enlarge

"AFTER PLASMA COILS" DYNO + 5 BHP
Click to Enlarge

A revolution in ignition technology!!

*Crest has used these coils on many of it's own cars with great success. HIGHLY RECOMMENDED.
We ALWAYS see a power gain at the wheels too.

The Plasma Direct is the ignition coil with a high power amplifier built in to it.
The Plasma Directs produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM.
The spark amperage is increased 100%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines.

The Plasma Direct will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with a legendary smoothness will be further refined with the Plasma Direct upgrade. Our Plasma Directs are OBD II compliant and C.A.R.B. approved.

Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go!

Highlights

- 100% secondary current (Spark Amperage) increase
- 4 Times Spark Energy Increase for the initial spark discharge
- Easy installation. Only replace stock coils to Plasma Direct.
- Compatible with all OEM components
- Compatible with OBD-II (On-Board-Diagnostics)

Plasma Direct is made to specific applications for the following engine codes:

M50, M52, M54, S50, S52, S54, M60, M62, N52, N54, N62, S85.

PLEASE SEE APPLICATION / PRICE LIST USING THE LINK AT BOTTOM OF THIS PAGE, THEN CALL OR E-Mail us TO DISCUSS / MAKE YOUR ORDER.

* PLEASE NOTE ! THESE COILS ARE SOLD UNDER BOTH THE OKADA AND IGNITION PROJECTS BRAND NAMES; THE OKADA BRANDED PARTS ARE MADE IN JAPAN AND THE IGNITION PROJECTS VERSIONS IN USA, THEREFORE THE LATTER IS LESS EXPENSIVE, BUT BUILT TO EXACT SAME SPECIFICATIONS AS OKADA, PERFORMANCE & FIT IS THE SAME ! ITEMS ON THE BELOW PRICE LIST WHOSE PART NUMBER BEGINS WITH "IP" ARE IGNITION PROJECTS BRAND, AND THOSE BEGINNING "PD" ARE OKADA. SOME FEW VEHICLE APPLICATIONS ARE ONLY AVAILABLE IN OKADA VERSION.
PLEASE LET US KNOW IF YOU REQUIRE A QUOTE FOR THE OKADA VERSION OF ANY IGNITION PROJECTS LISTED ITEM.

 

Click to Enlarge

OEM Stock
Click to Enlarge

With Okada Plasma Boost
Click to Enlarge

The Plasma Booster is a high power amplifier which drastically boosts ignition coil current.
The Spark Increase is dramatic with the Plasma Booster and you can expect 100-percent increase in Spark Current, which is the amperage going to the spark. With such an increase in spark current, the ignition process is faster and it also creates a faster burn, thus leading to more Horsepower and Torque. Complete ignition decrease the incidence of "hot spots" in the combustion chamber and lowers the risk of detonation.

Features:

- Easy to install, only 2 wires on distributor type ignition.
- 100% secondary current (Spark Amperage) increase
- 4 Times Spark Energy Increase for the initial spark discharge
- Compatible with all OEM components
- Compatible with OBD-II (On-Board-Diagnostics)

For applications and pricing please see link below



Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

Stock System
Click to Enlarge

With Plasma Ground
Click to Enlarge

The Plasma Ground is connected at the ground side of the ignition coil and increases performance and engine efficiency by creating an ultra fast alternating current at the secondary spark discharge, this is called Coil Ground Tuning.
Plasma Ground works perfectly together with all other Okada Projects Plasma Ignition parts and increases secondary spark discharge current.
Increase in secondary current is extremely important, since it creates a faster burn for high performance engines. The Plasma Ground is engineered to increase spark effectiveness on BMW engines, and is 100-percent compatible with any late model OBD and engine control units.

For applications and pricing please see link below.

Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Okada Projects, an innovator in the field of Ignition Systems for internal combustion engines has released its newest product, the Plasma LIFT, Coil Enhancement for Coil Over Plug and other Ignition Systems. Extensive testing has proven that Plasma LIFT delivers reliable performance in a cost-effective product.

Plasma LIFT is connected at the Power Side of the ignition coil and increases spark voltage, which is especially beneficial for turbo charged engines. When turbo pressure is increased, the engine requires a much higher spark voltage, based on Paschen’s Law. If this extra voltage is not delivered, it can cause misfire. Plasma LIFT prevents this misfire. Furthermore, the Plasma Lift is designed so that the voltage adjustment is possible. This feature will give you more freedom to adjust air/fuel ratio and plug gap and performance is increased.

Plasma LIFT works perfectly together with all other Okada Projects Plasma Ignition parts and increases secondary spark voltage and spark current. This extremely important increase in secondary current creates a faster burn for high performance engines. In addition to increasing horsepower and torque, test vehicles have shown a moderate improvement in fuel mileage. The Plasma LIFT is engineered to increase spark effectiveness on modern cars and is 100% compatible with any late model OBD and engine control units.


For applications and pricing please see link below.



Estimated Volumetric Shipping Weight : 5.00 Kg

 

BMW KIT
Click to Enlarge

SUBARU KIT
Click to Enlarge

INSTALLED
Click to Enlarge

The Plasma Spark is the Spark Plug Boot (Socket) specially designed and developed to work as a secondary amplifier.
It creates strong sparks in very short time (nano-seconds), creating a faster flame front and quicker light-off of the mixture kernel to complete combustion. Installing the Plasma Spark, you can feel immediate torque up from low RPM and get more horsepower to the high RMP range!
Also installation is easy, direct bolt-in to the engine, no splicing or cutting into stock wiring. Simply replace the stock boots with our Plasma Spark Boots and ready to go!

Features:

- Creates strong sparks in very short time (nano-seconds)
- Creates Ultra fast spark discharge.
- Easy installation. Only replace stock boots to Plasma Spark.
- Compatible with all OEM component.
- Compatible with OBD-II. (On-Board-Diagnostics)
- Compatible with Plasma Direct coils

For applications and pricing please see link below.



Estimated Volumetric Shipping Weight : 5.00 Kg