Crest Automotive Tuning - C) CHASSIS, BRAKES, SUSPENSION & STEERING UPGRADES

Product Code: bmwmountfull

Click to Enlarge

E36/E46 COUPE & Z4 STREET REAR SHOCK MOUNTS (PAIR) FULL PLATE

Using urethane bushings that can be installed in either a stiff or semi-stiff position, this is the perfect rear shock mount for BMW E36, E46 and Z4 cars.

Will not fit Convertibles or E30s

Made of 6061 aircraft aluminum, these mounts are a perfect fit for any shock.
Two steel studs mounted to a steel bracket sandwich this mount to the body, and allow quick access from under the wheelwell for adjusting rear shocks, especially Konis.
This part, including the urethane bushings, has a lifetime guarantee to the original purchaser. Price is per pair.

available for 10mm, 12mm, 14mm shock absorber shaft.

Estimated Volumetric Shipping Weight : 3.00 Kg

Product Code: bmwmountrace

Click to Enlarge

REF: BMWMOUNTRACE

Rear shock mount to fit BMW, only recommended for race cars.

If you are racing, and especially with coil-over shocks, you need this monoball rear mount that slides for spring to tire clearance.

Complete with shock stem adapters.Uses a spherical bearing instead of urethane or rubber. Please specify 10, 12, 14 or 16mm stem diameter.

Billet aluminum with spherical bearings.

Note that ALL Ground Control rear shock mounts are clamped to the body for extra strength. Price per pair.

Estimated Volumetric Shipping Weight : 3.00 Kg

Product Code: gclowerinbearing

Click to Enlarge

Ref: LowerInBearing-1

• Replaces your soft worn lower - inner control arm bushings with a serviceable bushing that houses a spherical pivot bearing.
• Eliminates unwanted flex.
• Reduces deflection for more precise handling.

Also fits M3 models.

Priced as a pair.

WE ALSO SELL SIMILAR UPGRADE FOR THE "UPPER - INNER" CONTROL ARM BUSH, PLEASE SEE OTHER LISTING FOR THIS ON SAME PAGE AS THIS ITEM. 10% DISCOUNT IF ORDERING BOTH PAIRS TOGETHER.

Estimated Volumetric Shipping Weight : 7.00 Kg

Product Code: gcsac

Click to Enlarge

NYLON SPRING ALIGNMENT CONE

Our nylon spring alignment cones for the BMW E30 and BMW E36/E46 and BMW Z4M Chassis. These cones are made to align the rear springs in the chassis rails.

Made to fit 2.25" Inner diameter and 2.50" inner diameter springs only, please specify spring diameter when ordering.

**SOLD AS A PAIR ONLY**

Please specify vehicle and model when ordering.

Estimated Volumetric Shipping Weight : 2.00 Kg

Product Code: gcspanner

Click to Enlarge

Ref: GCSpanner

This is a replacement spanner for Ground Control coilover kits.

This spanner is included only in certain GC coilover kits, so if your GC coilover kit included a spanner, then you do not need to buy this.

The most common misconception why people think they may need a spanner, is that they are tilting the car on its side to adjust the collars, so they are fighting the swaybars. The swaybars are designed to keep the car from tilting by pushing against the suspension, which makes it difficult to turn the adjuster by hand.

A spanner could easily ruin things if used under these conditions.

If this describes your situation, try lifting the front or rear of the car off the ground, and adjust with your hands.

Estimated Volumetric Shipping Weight : 2.00 Kg

Product Code: gcbmwmounttall

Click to Enlarge

Ref: BMWmountTall-8

These mounts are much stronger than stock, and include urethane bushings and heavy-duty hardware, to reduce deflection and improve the performance of your dampers.

Reduces droop on long shocks.
Helps retain rear springs on lowered cars.

All parts are anodized or zinc plated for corrosion resistance and long life.
Reinforcement brackets strengthen shock tower and install from the top down to ease installation.

Includes all hardware and factory gaskets.

Replacement bushings are available if needed.

** When ordering please specify 10mm or 12 mm shock stem diameter, shock brand of manufacturer and vehicle.

All Ground Control parts are proudly made in the USA.
Priced per pair.

Estimated Volumetric Shipping Weight : 11.00 Kg