Click to Enlarge

rubber protective “boots”
Click to Enlarge

Click to Enlarge

REF: BMWLINK

Adjustable front anti roll bar drop link pair for most BMW models.

Ground Control exclusive machined billet stainless steel tapered adapters press into stock holes for a precise fit.

Please do not compare to other kits that ask you to use a 3/8 rod-end into the BMW 10mm hole, it just does not work. That is a loose fit that only gets worse, especially when driven hard.

Adjustable length 6061 anodized rod, with wrench flats and jam nuts. 3 piece proprietary rod ends.


**NOTE: PLEASE ADVISE WHAT SUSPENSION AND ANTI ROLL BARS YOU ARE USING AND WHICH VEHICLE MODEL

Fitting Time: 1.00 hour.
Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

REF: BMWLINKREAR-1

Adjustable end link for many BMW rear sway bars.

Ground Control exclusive machined billet stainless steel tapered adapters press into stock holes for a precise fit.

Please do not compare to other kits that ask you to use a 3/8 rod-end into the BMW 10mm hole, it just does not work. That is a loose fit that only gets worse, especially when driven hard.

Does NOT fit stock E30/E30M3, E46/E46M3 or E36/E36M3 bars.
Fits many aftermarket bars, but it is the customers responsibility to confirm. Available in stock size (10mm) or 3/8 size. Do not attempt to use 3/8 bolt into a 10mm hole.

**PLEASE ADVISE EXACT MODEL AND SUSPENSION SET UP WHEN ORDERING.

Estimated Volumetric Shipping Weight : 4.00 Kg

 

Click to Enlarge

The PowerAlign Magnetic Camber Gauge measures the Camber angle on the wheel hub or brake disc and allows on-car adjustment to ensure correct wheel alignment. This is a useful tool for setting Camber angles after dismantling and re-assembling of the suspension and is an ideal track day companion.

This easy to use magnetic gauge attaches to the hub or brake disc and graduates +/- 6 degrees and comes supplied in a durable storage case.

Save on expensive repair costs and down time by using the PowerAlign Magnetic Camber Gauge.

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Probably the most overlooked suspension component in the performance world is the sway bar / anti roll bar end-link.
This simple component attaches the sway bar to each end of the suspension so the sway bar can do its job; promoting flat cornering of the vehicle in a turn.
This simple component can drastically hurt your car's performance if not optimized, especially in a BMW where high sway bar rates [and therefore high stresses] are common.

A sway bar with fixed length links can induce a load into any two cross-corners of your vehicle. The ability to neutralize the sway bar in your suspension system is a great advantage to baseline, balance, and refines your vehicle's handling characteristics. These links have achieved this by creating adapters that integrate current sway bar link technology to the traditional sway bar architecture. A worth while upgrade for any modified BMW.

Common issues with incorrect type or set up of drop links :

-Have you ever had a sway bar link bend..?
-Do you know if you are having suspension bind due to insufficient sway bar end link articulation (or simply poor design, bad bushing, etc)..?
-Have you ever had a sway-bar link fail at the welded joint between the ball and the link..?
-Do you want to properly corner weight your car..?

All these common issues that your vehicle may have had are addressed with this set.

These sway bar end links are the best solution, and unlike many others on the market these INCLUDE WEATHERPROOF "BOOTS" to help prevent the early demise of "open" type of drop link joints through corrosion / clogging .

Eliminate sway bar pre-load that adversely affects handling, strengthen your suspension, and truly optimize your setup with this strong Adjustable Sway Bar Link Set!... With no penalty, these links are quiet, just like OE links.

Put Simply: no matter at what ride height, stock or otherwise, OEM sway bar links are a weak link (literally) and add preload to your suspension. These adjustable links are superior to all other designs and unlike the upgraded units that may have come in your aftermarket sway bar kit, these have no polyurethane to squeak, tear, or blow out on the track.
These links feature a THK ball socket that is pre-lubricated, and sealed for durability and prolonged life. THK is an OE manufacturer for Porsche, Nissan, Honda, Ford, GM, Toyota and even BMW.

Ford In developing the new OEM suspension for their 2010 GT500, found these links made such a difference the factory test drivers believed the prototype sway bars had been re designed and they became OE equipment of this model. Thats an improvement!

The Benefits of This Design Over the OEM Sway Bar Links are:
•Heavy Duty Ball Socket Joint has excellent strength and life, never require servicing
•Large Diameter Link Rod to Resist Bending
•Designed for he needs of Racing and track use, and a Perfect Upgrade/ Replacement for Street Use!
•No Welded Joint to Fail
•Adjustable Design to Enable Corner Weighing and Swaybar Pre-load Adjustment and Yet Still Meet Racing Class Requirements
•High Mis-Alignment Design to Prevent Suspension Coil Bind (even better than spherical joints!)
•Joints are pre-greased and have a water-tight seal.
•Precision joint allows smooth operation.

WHEN ORDERING PLEASE SELECT REQUIRED PRIMARY LENGTH OF LINKS REQUIRED, 60,75, 85 OR 90 MM (See below to help you choose)
Tech Tip:
Measurements below are at stock ride height.
Longer or shorter length may vary accordingly to your ride height, geometry, clearance issues under the chassis around intercoolers/ oil coolers, body components, etc.
A good start is to order a longer length if your car is more than 1.5" lower than stock Here are some stock lengths, the Powergrid pieces are adjustable to fit the closest size application:

•E30 (M3), E24, E28, E34: front 60mm
•E36 M3: Front 60mm
•E39: Front 60mm (Stock Height. We recommend using 75mm if Lowered)
•E46 M3: Front 75mm
•E90: Front 60mm
•E60: Front 90mm

Note:
-End links do not fit non-M3 E36 (except 325i/is produced before 06/1992)
-Does not fit E30 rear, call or email for our kit for the E30 rear.

NOTE: PLEASE ADVISE WHAT SUSPENSION AND ANTI ROLL BARS YOU ARE USING



Estimated Volumetric Shipping Weight : 2.00 Kg