PIC 1
Click to Enlarge

PIC 2
Click to Enlarge

PIC 3
Click to Enlarge

PIC 4
Click to Enlarge

PIC 5
Click to Enlarge

*NOTE : THIS LISTSING IS FOR THE FOLLOWING MODELS :*

Part number: SS-CLU-01

- 1992-1999 E36 3 Series - 328i/328is, 323is (not for 325)

- 1995-1999 E36 M3 (3.0 and 3.2 liter, US Spec)

- 1993-1995 E34 5 Series - V8 models, 530i & 540i

* FOR OTHER MODELS PLEASE SEE VARIATIONS SECTION BY CLICKING RED BUTTON AT TOP RIGHT. *


Rogue Engineering is proud to offer our braided stainless steel line that replaces the rubber hydraulic hose that connects from the clutch slave cylinder to the clutch master. Over time, the rubber hose can swell and deform under the pressure affecting pedal feel. Our stainless line ensures consistent pedal feel and performance.

What makes our clutch line unique? A few features separate ours from the standard OEM rubber line:

- All lines produced in the USA, in our Upper Saddle River, NJ facility.
- Teflon® core, surrounded by a braided stainless steel line, covered with an abrasion-resistant plastic jacket
- All lines 100% pressure tested to 3000psi.
- Rogue Engineering lines have tractability, a DOT requirement. We are a registered manufacturer with the DOT.

Tech Tip!

While upgrading to this stainless steel line, removing the factory "lock valve" (aka clutch delay valve, CDV) will improve overall clutch engagement and pedal feel. This restrictor valve, found inline of the stock clutch line, slows the fluid movement causing a delayed reaction of the clutch assembly.

Stainless Steel Clutch Line Inequality

When we set out to create our stainless steel clutch lines, we wanted to duplicate the factory dimensions as closely as possible. By doing this, we can produce a product that not only fits like factory, but also has the performance advantages of a stainless steel line. The pictures below show our attention to details.

In the picture 2, we compare our SS-CLU-04 line with a factory BMW OEM line. We've replicated the complex bend of the hard line while also having the benefits of the stainless steel line. Our two piece assembly allows us to construct and pressure test the hose, while the hard line section replicates the factory specifications.

One of our competitors have a very different view on the same topic. Instead of replicating the factory hard line bend, they attach a small, bent fitting and adapter. As you would imagine, fit is nowhere near like the factory line.

Coincidentally, our SS-CLU-05 line uses a completely different hard line to replicate the factory OEM high pressure hose. This particular competitor decides that their one and only hose with a bent fitting is good enough.

Make sure the line you're getting replicates the factory line before you take your car apart. How frustrating would it be to disassemble the clutch hydraulic system only find out the replacement line was a terrible fit?

The Rogue Engineering Stainless Steel Clutch line uses a fitting crimp system very similar to the factory crimp. This ensures a strong, leak-free joint at the fitting to the hose for long lasting performance.

Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

A beautifully machined light-weight steel alloy flywheel for E46 models, S54 and M54 engines.

With a low moment of inertia this helps the engine “spin up” faster and get more power to the ground through lower rotating mass; it performs smoothly and takes any use flawlessly.

A bit of extra mass on this steel flywheel (18.5 lbs Vs 11 lbs for a typical aluminum version) is still dramatically lighter than OEM and helps with drivability and harmonic issues that some racers face when the flywheel is very-low mass; instigating problems when they flywheel has little to no harmonic damping characteristics. It also makes this Flywheel a great match for SMG cars.

A heavier steel flywheel also makes more torque than lighter aluminium versions.

Steel construction with accurate tolerances ensures high durability no matter what the task.

Designed with the intention to accept a sprung-hub clutch disc, this flywheel excellent for street use or racing rules.

Features:
•CNC machined flywheel, zero-balanced
•High mass make this a favorite of drag racing & street drivers, as well as racers who have had issues with crank harmonics causing failures
•Flywheel bolts, pressure plate bolts, and dowel pins included
•Will fit: 5-speed, E46 small 6-speed (pilot bearing housed in flywheel) & E46-M3 (std. and SMG! Please specify above)
•When ordering a clutch, you may also select from us the appropriate sprung - hub type clutch disc (5 speed, E46 6 speed, E46 M3 SMG) for your transmission application
•Includes a factory starter ring gear pre installed
•Excellent results for everyone: works with full race cars, extreme-street or even mild daily drivers.

Heavy duty pressure plates and discs as well as full packages are also available to match with this clutch, see Clutchmasters and HPF clutches' for a great match with this flywheel. Please inquire with us for a complete clutch solution to meet any need.

Notes:-
- E46 M3 input shaft diameter: 35mm vs. E36 29mm
-All use the E46 M3 fitment pressure plate for best performance
-At the inception of this flywheel, Grand Am rules allowed the use of lighter than stock flywheels... but stipulated that they could not be more than a given percentage lighter, and must have been made from steel. This flywheel is ideal for this application

Estimated Volumetric Shipping Weight : 13.00 Kg

 

Click to Enlarge

RE part number pin.ss

ROGUE ENGINEERING STAINLESS STEEL CLUTCH PIN

The factory clutch pivot pins are made from plastic / delrin and eventually go flat at the tip, deleteriously affecting clutch operation and engagement, even more so if a high performance clutch set is being used.

This Direct Replacement Stainless Steel Clutch Pin eliminates all the above issues.

Estimated Volumetric Shipping Weight : 0.25 Kg

 

E9X M3 V8
Click to Enlarge

E30 M3 S14
Click to Enlarge

B58 BMW
Click to Enlarge

S55 M3/M2/M2 Comp
Click to Enlarge

S55 M3/M2/M2 Comp
Click to Enlarge

E9x M3 DCT
Click to Enlarge

Click to Enlarge

Click to Enlarge

S50/S52/S54 M3,Z4M, Z3M
Click to Enlarge

We offer the full range of TTV Racing products, for street and track/race use.
Clutches, flywheels, engine pulleys, shafts.
ALL BMW models catered for.

We are building a new website section to list all items per model specification individually, meanwhile please call or E-Mail us for any info and prices, WE WIL BEAT ANY CHEAPER QUOTE.

TTV Industrial ltd is a family run business located in the East of England

TTV has been precision engineering for over 30 years, designing and manufacturing automotive parts for original equipment & motorsport, club racer to world championship.

BMW Engine model range : -

BMW M10
BMW M12 M13
BMW M20
BMW M30
BMW M40 M42 M44
BMW M47
BMW M50 M52 M54
BMW M57
BMW M60
BMW M62
BMW M70
BMW N13
BMW N43 N45 N46
BMW N45
BMW N47
BMW N52
BMW N54
BMW N55
BMW N57
BMW N62
BMW N73
BMW B58
BMW S14
BMW S38
BMW S42
BMW S50 S52 S54
BMW S55 M2 M3 M4
BMW S62
BMW S65
BMW S85



Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

For full vehicle application list please see applications table in the image column right hand side of this page. PLEASE CONFIRM YOUR VEHICLE WHEN ORDERING.

PROBLEM:
The BMW plastic clutch pivot pin fails or wears out prematurely in some cases, especially if the car has a high performance clutch or is driven hard. The temperature in the bell housing increases the radiant heat from the clutch disc and the pressure plate transfers it to the clutch fork causing failure or excessive wear of plastic pin.

BENEFIT:
This AGA pivot pin is made of silicon bronze. It offers superior wear characteristics, especially in high heat and high performance clutch applications where plastic easily fails.

APPLICATIONS : Please see purple table in image row on the right. For the E39 M5 (not listed on table) please order part AGA-CPP-223-328

Estimated Volumetric Shipping Weight : 0.50 Kg

 

LIGHTWEIGHT FLYWHEEL
Click to Enlarge

MULTI PUCK CERAMIC TYPE
Click to Enlarge

PERFORMANCE ORGANIC TYPE
Click to Enlarge

SEGMENTED KEVLAR DISC
Click to Enlarge

TWIN DISC TYPE
Click to Enlarge

TWIN DISC ASSEMBLED
Click to Enlarge

Click to Enlarge

Click to Enlarge

THIS IS A COVER PAGE DETAILING THE TYPES OF CLUTCH AND / OR FLYWHEEL OPTIONS FROM UUC MOTORWERKS, AFTER READING PLEASE USE THE EXCEL PRICELIST LINK BUTTON AT BOTTOM OF THIS PAGE TO THEN SEE ALL SPECIFIC CLUTCH / FLYWHEEL OFFERINGS AND PRICES FOR YOUR PARTICULAR BMW MODEL.


UUC offer a range of clutch, clutch + flywheel, and twin disc clutch / flywheel packages to suit most BMW models fro various uses and power levels. please read on for info on these different options and help in selecting which is best for you.

LIGHTWEIGHT FLYWHEELS
A good quality light weight flywheel reduces inertia and so increases throttle response, gearshift speed and acceleration.

- For info on how a flywheel works please see PDF link below
- For info on effect on torque output please see PDF link below

CLUTCH - ONLY KITS
UUC offer a range of clutch units to mate to your existing factory dual mass or single mass lightweight flywheel (please advise which type you have when ordering), with different compounds for different types of use.

- For info on the different friction compounds available and how to choose the best for your application, please see PDF link below

-For info on removing the clutch delay valve please see PDF link below

-For info on removal of the BMW "self adjusting clutch" mechanism please see PDF link below

CLUTCH & LIGHTWEIGHT FLYWHEEL KITS
This title is self pretty much explanatory !

TWIN DISK CLUTCH & LTW FLYWHEEL KITS
When only the strongest and best will do !
Whether your BMW is used for drag racing, drifting, or just embarrassing exotic supercars on the street, you need a clutch that can handle the abuse.

Developing our class-leading flywheel and clutch technology to even greater heights, the new Twin Disk flywheel/clutch package is designed for BMWs developing the highest levels of power from turbocharging or supercharging, or for extreme use such as drag racing or drifting.

Until now, taming a 600hp+ BMW meant living with a clutch that was the stereotype "on/off switch" with rough engagement characteristics that made daily-driving a compromise. By incorporating larger disks than the average multi-disk clutch, the UUC design maintains original equipment smooth operation yet easily handles power levels approaching 1,000hp (see material option details below).

Larger surface area of a smoother-functioning material is the key to combining the characteristics of high torque capacity with street-friendly operation in this all-new design.

For E36 and E46 models, total rotating mass of the complete flywheel and twin clutch package is 25.5lbs, the same total mass as a typical 11.5lb flywheel coupled with the M3 clutch or UUC's Stage 2/M5 clutch conversion package.

For E39 and Z8 models, total rotating mass of the complete flywheel and twin clutch package is 32lbs, the same total mass as UUC's Stage 2/850CSi V12 clutch conversion package. 20lbs savings over the original flywheel.

Material guideline based on power output:

Twin Organic: 850hp, 640ft-lb applications

Twin Feramic: 1000hp, 820ft-lb applications
























SEE VIDEO OF UUC TWIN DISC IN ACTION FURTHER DOWN :

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

Stainless steel clutch line for improved clutch control

100% MADE IN USA

Original clutch line is rubber and can expand under the normal pressure of use. This expansion of the line negatively affects the clutch slave cylinder actuation, and makes for mushy pedal feedback.

UUC's Stainless Clutch Line is used to "performance tune" your clutch control. Inner Teflon line is covered with woven stainless steel braid that will not expand under pressure.

The advantages include better clutch pedal feedback and superior clutch modulation. Results will be immediate.

Technical features:
- line material fully compliant with DOT standards (MVSS-1006)
- lines burst-tested to 6000psi
(maximum tested pressure from a BMW hydraulic system is 1200psi)
- Teflon® inner line covered with a woven layer of stainless steel and covered in an abrasion-resistant material (translucent blue plastic covering).
- end pieces perfectly match original BMW design for easy assembly.

*(Professional installation recommended)*

*(PLEASE CLICK ON RED BOX AT TOP OF THE PAGE FOR VARIATIONS)*



Estimated Volumetric Shipping Weight : 1.00 Kg

 

xtreme organic clutch kits
Click to Enlarge

Xtreme ceramic clutch kits
Click to Enlarge

Xtreme race ceramic clutch kits
Click to Enlarge

Xtreme carbon clutch kits
Click to Enlarge

Xtreme multi-plate clutch kits
Click to Enlarge

This is a cover page for Xtreme Clutch, with information about their product lineup and history. We are currently working on a pricelist for this page. Until the pricelist is finished, please contact us for prices, and for more information on Xtreme Clutch products.
We will beat any other genuine quote!

About Xtreme Clutch
Xtreme Clutch is one of the leading manufacturers of performance clutch and flywheel parts, with close ties to motorsport, and extensive in house testing and design equipment.

Xtreme Clutch offer a wide range of performance clutch kits to suit most BMW models. Their products cater for a huge range of uses and power levels. Please read below for information on these different options to select the best configuration to suit your needs.

CLUTCH KITS

Xtreme clutch offers a number of different clutch kit specifications. These are:

STAGE 1 - ORGANIC
Recommended for: Lightly Modified Street Vehicles
This level of clutch kit is perfect for lightly modified street cars, and works brilliantly for occasional track use too. Available in 4 different configurations, stage 1 organic kits offer a significant increase in performance and torque capacity while maintaining excellent driveability.
The four configurations of stage 1 clutch kits are
SPRUNG ORGANIC - 1A
RIGID SOLID ORGANIC -1G
STEEL BACKED ORGANIC -1T
EXTRA HEAVY DUTY SPRUNG ORGANIC -1AX
-Please enquire as to which configuration is right for your specific vehicle-

STAGE 2 - CERAMIC
Recommended for: Motorsport Applications
These kits are available with sprung or sprung / cushioned ceramic friction discs and are designed for motorsport applications where higher heat and torque capacity is required. These can also be used in some road applications.
Ceramic kits come as:
Sprung Ceramic - 1B
Cushioned Ceramic -1C
please enquire as to which configuration is right for your specific vehicle

STAGE 2R - RACE CERAMIC
Recommended for: Motorsport Applications
Stage 2R kits feature a sprung ceramic friction disc, but with even greater clamping force pressure plate for higher torque capacity. These kits are recommended for use in motorsport applications only. Stage 2R Ceramic Motorsport upgrades are designed specifically for motorsport applications that require a higher torque capacity than the stage 2 equivalents. Each Stage 2R kit includes an Extra Heavy Duty pressure plate with even higher clamping force and a sprung ceramic friction disc.
These kits are designed specifically for motorsport applications such as circuit, rally, drifting and drag racing.
The only configuration for race ceramic kits is Extra Heavy Duty Sprung Ceramic -1R.

STAGE 3 - CARBON
Recommended for: Motorsport Applications Requiring Very High Heat Capacity
The Xtreme Clutch Stage 3 kits include a carbon friction disc and are recommended for very high power motorsport applications. These kits have been developed to suit applications where the clutch experiences exceptional temperatures and must therefore be able to perform without the risk of welding. The kits are commonly used in exceptionally high horsepower motorsport application and also has the added benefit of reducing rotational inertia on the input shaft. The friction discs do require warming up before getting full bite and are only suitable for motorsport applications.
The only configuration for carbon clutch kits is Carbon Clutch -1P.

MULTI-PLATE
Recommended for: Very High Horsepower Street & Motorsport Applications
Xtreme Clutch offers a wide range of multi-plate performance kits including everything from twin & triple plate organic upgrades for very high-performance road applications to 184mm quad-plate racing kits for 1000+ HP Time Attack cars.
Multi plate clutch kits come as:
184mm Motorsport Kits
200mm Motorsport Kits
200mm Sprung Motorsport Kits
230mm Motorsport Kits
Please enquire as to which configuration is right for your specific vehicle

FLYWHEELS
- Most clutch kits for the older "E" series BMW models come complete with single mass lightweight flywheels
- All Twin Disk kits are complete with single mass lightweight flywheels
** When looking up the part number for your particular model, if the 6th digit is a "5" or "6" then a flywheel is included, for example part number KBM245961A is a clutch kit with flywheel included.

PRICING
A new price list is being worked on, meanwhile please contact us for best prices.
We will beat any other genuine quote!