Click to Enlarge

Conical Seat to Ball Seat Adapter

- Converts 60 degree conical seat nuts to ball seat
- Can be used with all Crest TECH standard conical and extended race nuts
- Can be used with all thread sizes, 12 x 1.5, 14 x 1.5, and 14 x 1.25
- Inserts between wheel and conical nut
- Manufactuered from hardended steel
- Zinc plated
- Outer diameter, 22.8mm.
- Inner diameter, 15.2mm.
- Height, 6.3mm
- Each kit consists of 20pcs.

Tips for use
- To ensure safe use, when installing, make sure that you get at least 6.5 turns when tightening nut
- Re-check torque after first 20 - 100 miles of service and re-torque as required to 85 - 88ftlbs

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Click to Enlarge

Extended length BLACK steel nuts for use with a Crest wheel stud conversion kits.

Thread size 12mm x 1.5mm pitch


(Comes as a set of 20 pce's)


Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

Click to Enlarge

For use with a Crest wheel stud conversion kit.

This is a set of steel GUNMETAL finish extended wheel nuts.

thread size 12mm x 1.5mm pitch


(Comes as a set of 20 pce's)

Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

For use with a Crest wheel stud conversion kit.

This is a set of steel NEO CHROME finish extended wheel nuts.

thread size 12mm x 1.5mm pitch


(Comes as a set of 20 pce's)

Estimated Volumetric Shipping Weight : 5.00 Kg

 

CREST TECHNOLOGIES EXTENDED STUD KIT
Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This listing is for Black 44mm length (12mm x 1.5mm thread pitch) studs with Black nuts, to be used in standard applications without spacers.
CA Stud conversion kit. Replaces your wheel bolts with studs and nuts, providing several advantages over the OEM wheel bolts:

- Lighter and stronger fixing method.
- Makes fitting / re fitting wheels MUCH easier and quicker.
- Prevents you from cross threading your wheel hubs, an expensive fix compared to the cost of these stud conversions. If you cross thread these studs on the wheel side, just replace the stud.
- Various size spacers can be used with the same stud kit (size range depending on which length kit chosen), no need to buy different length bolts when you remove / change size of spacers.

Features include:

- OEM Style Black Zinc Finish
- Bullet Nose
- TUV Approved
- 12x1.5 Thread
- Made in Europe
- 10.9 grade hardness

ALSO AVAILABLE IN SILVER. PLEASE STATE CHOICE WHEN ORDERING.

Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

CREST TECHNOLOGIES EXTENDED STUD KIT
Click to Enlarge

This listing is for Black 68mm length (12mm x 1.5mm thread pitch) studs with Black nuts, to be used with spacers up to 12mm width.

Please note, unlike most other kits, ours include :
- Full install & Torque guide,
- Allen Key
- Loctite Thread sealant

CA Stud conversion kit. Replaces your wheel bolts with studs and nuts, providing several advantages over the OEM wheel bolts:

- Lighter and stronger fixing method.
- Makes fitting / re fitting wheels MUCH easier and quicker.
- Prevents you from cross threading your wheel hubs, an expensive fix compared to the cost of these stud conversions. If you cross thread these studs on the wheel side, just replace the stud.
- Various size spacers can be used with the same stud kit (size range depending on which length kit chosen), no need to buy different length bolts when you remove / change size of spacers.

Features include:

- OEM Style Black Zinc Finish
- Bullet Nose
- TUV Approved
- 12x1.5 Thread
- Made in Europe
- 10.9 grade hardness

ALSO AVAILABLE IN SILVER. PLEASE STATE CHOICE WHEN ORDERING.

Estimated Volumetric Shipping Weight : 5.00 Kg

 

CREST TECHNOLOGIES EXTENDED STUD KIT
Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This listing is for Black 75mm length (12mm x 1.5 thread pitch) studs with Black nuts, to be used with spacers up to 15mm width.

Please note, unlike most other kits, ours include :
- Full install & Torque guide,
- Allen Key
- Loctite Thread sealant

CA Stud conversion kit. Replaces your wheel bolts with studs and nuts, providing several advantages over the OEM wheel bolts:

- Lighter and stronger fixing method.
- Makes fitting / re fitting wheels MUCH easier and quicker.
- Prevents you from cross threading your wheel hubs, an expensive fix compared to the cost of these stud conversions. If you cross thread these studs on the wheel side, just replace the stud.
- Various size spacers can be used with the same stud kit (size range depending on which length kit chosen), no need to buy different length bolts when you remove / change size of spacers.

Features include:

- OEM Style Black Zinc Finish
- Bullet Nose
- TUV Approved
- 12x1.5 Thread
- Made in Europe
- 10.9 grade hardness

ALSO AVAILABLE IN SILVER. PLEASE STATE CHOICE WHEN ORDERING.


Estimated Volumetric Shipping Weight : 5.00 Kg

 

CREST TECHNOLOGIES EXTENDED STUD KIT
Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This listing is for Black 82mm length (12mm x 1.5 thread pitch) studs with Black nuts, to be used with spacers up to 15mm width.

Please note, unlike most other kits, ours include :
- Full install & Torque guide,
- Allen Key
- Loctite Thread sealant

CA Stud conversion kit. Replaces your wheel bolts with studs and nuts, providing several advantages over the OEM wheel bolts:

- Lighter and stronger fixing method.
- Makes fitting / re fitting wheels MUCH easier and quicker.
- Prevents you from cross threading your wheel hubs, an expensive fix compared to the cost of these stud conversions. If you cross thread these studs on the wheel side, just replace the stud.
- Various size spacers can be used with the same stud kit (size range depending on which length kit chosen), no need to buy different length bolts when you remove / change size of spacers.

Features include:

- OEM Style Black Zinc Finish
- Bullet Nose
- TUV Approved
- 12x1.5 Thread
- Made in Europe
- 10.9 grade hardness

ALSO AVAILABLE IN SILVER. PLEASE STATE CHOICE WHEN ORDERING.

Estimated Volumetric Shipping Weight : 5.00 Kg

 

CREST TECHNOLOGIES EXTENDED STUD KIT
Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This listing is for Black 90mm length (12mm x 1.5 thread pitch) studs with Black nuts, to be used with spacers up to 25mm width.

Please note, unlike most other kits, ours include :
- Full install & Torque guide,
- Allen Key
- Loctite Thread sealant

CA Stud conversion kit. Replaces your wheel bolts with studs and nuts, providing several advantages over the OEM wheel bolts:

- Lighter and stronger fixing method.
- Makes fitting / re fitting wheels MUCH easier and quicker.
- Prevents you from cross threading your wheel hubs, an expensive fix compared to the cost of these stud conversions. If you cross thread these studs on the wheel side, just replace the stud.
- Various size spacers can be used with the same stud kit (size range depending on which length kit chosen), no need to buy different length bolts when you remove / change size of spacers.

Features include:

- OEM Style Black Zinc Finish
- Bullet Nose
- TUV Approved
- 12x1.5 Thread
- Made in Europe
- 10.9 grade hardness

ALSO AVAILABLE IN SILVER. PLEASE STATE CHOICE WHEN ORDERING.

Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

Black Extended Race Lock nuts (12 x 1.5)

Each kit consists of (5) Lock nuts and (1) Key

- Ball seat adapters are available.
- Ideal for use with MH Titan Nuts
- Manufactured from Forged alloy steel
- Superior strength and durability vs. Aluminum
- Heat treated to 10.9 hardness
- Ultra Durable Alumite coating
- Open ended for full racing stud engagement
- 60 degree conical seat
- Torque to 85-88 ft/lbs
- Will fit all Crest TECH extended stud lengths

Tips for use:
- Re-check torque after first 20-100 miles of service and re-torque as required to 85-88ft/lbs

Estimated Volumetric Shipping Weight : 1.00 Kg