Click to Enlarge

* THIS LISTING IS FOR THE STANDARD ROD END VERSION *

RE part number re.e9x.cam

For those drivers looking for the adjustability in the rear of their E8X/E9Xs, we are proud to offer you our Adjustable Rear Camber Link Set.

These replace the wishbone and guide rod links in the factory suspension which have rubber bushings and limited adjustability.

These rear links feature 6061-T6 anodized aluminum links and feature rod ends with carbon fiber lined races. The 303 Stainless rod end inserts offer strength and corrosion protection for long lasting performance.

For dedicated race cars, we offer upgraded high strength rod ends at additional cost.

Please now refer to Variations section by using the red link button at top right of the page to access info on different options / models.

Recommended for those who drive their vehicles at the track.

Professional installation recommended.

Includes set of four (4) links.

An alignment is required after installation.

These are a direct bolt in for the following vehicles:

•All E8X 1-Series, including 1 M Coupe
•All E9X 3-Series, including M3


Estimated Volumetric Shipping Weight : 10.00 Kg

 

Click to Enlarge

ROGUE ENGINEERING E9X E8X REAR HEIGHT ADJUSTERS (PAIR)

RE part number re.e9x.sp

These adjustable height rear spring platforms, designed to work with 60mm inner diameter coilover rear springs mounted in the stock spring location at the rear of a BMW E8x (1 series) or E9x (3 and M series). The thread used is self locking once any load is applied.

Made from 6061-T6 aluminum, these are anodized to prevent corrosion. These can be adjusted from a minimum of 0.5" thick to a maximum of 2.75" thick. These can be adjusted independently of each other and is great for corner balancing of your BMW.

Designed to ride on the stop of the spring in an E8X/E9X. The locating stub fits in the factory location and replaces the bulky factory locating stub/hat, which inhibits ride height adjustment with other similar rear ride height adjusters.

Sold as a pair

Estimated Volumetric Shipping Weight : 3.00 Kg

 

PARTS INCUDED
Click to Enlarge

STOCK PARTS INSTALLED
Click to Enlarge

ROGUE PARTS INSTALLED
Click to Enlarge

RE part number E9X.TAE9X.M3up

Rogue Engineering introduce its E90/92/93 M3 adjustable rear toe arms.
This product has the upgraded rod ends, std rod ends are available. Please contact us direct for std units.

These arms allow for greater toe adjustment for vehicles that have been lowered on coilover suspension. For E9X M3 owners with just lowering springs, these are not a necessary requirement.

How Low Can You Go?
When an E9X M3 is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe can cause increased tire wear (faster than more camber). Here are the specifications for the E9X M3.

Factory Toe Specs Value
Min +0.10
Max +0.20
Preferred +0.15

On a recent install of coilovers, we discovered that the toe of the rear wheels had an incurable +0.81 left and right toe. Unfortunately, with the stock toe arms, we could not dial out the toe. Therefore, creating a strong, more adjustable part was in order.

The Right to Bear (Stronger) Arms
The sophisticated (and some say complicated) rear suspension of the current E9X M3s will undoubtedly be replicated by many other companies in the future. However, for those of us in the aftermarket, we're still learning about the little quirks of the suspension. By applying our experience with our E36 and E46 suspension components, Rogue have built arms that are strong and lightweight, while serving the needs of the rear suspension adjustments.

Rogue rear control arms are made from the highest quality components, from USA.

100% machined and anodized, 6061-T6 lightweight aluminum arms
High-strength, 3 piece, rod end (with carbon fiber reinforced, PTFE race) offers longer live for street use over standard rod ends
Seals-it Rod End Seals keep dirt, water and other contaminants out (Rogue Engineering is the ONLY company to incorporate this simple, yet effective item to extend the life of the rod end!)
Lighter than stock! (Stock is 875g, RE arms are 640g)
Extremely easy installation and adjustment



Estimated Volumetric Shipping Weight : 5.00 Kg

 

ROGUE PARTS INSTALLED
Click to Enlarge

STOCK PARTS INSTALLED
Click to Enlarge

PARTS INCUDED
Click to Enlarge

RE part number e9x.tanon-m

Rogue Engineering introduce its E90/92/93 M3 adjustable rear toe arms. These arms allow for greater toe adjustment for vehicles that have been lowered on coilover suspension. For E9X M3 owners with just lowering springs, these are not a necessary requirement.

How Low Can You Go?
When an E9Xis lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe can cause increased tire wear (faster than more camber).

On a recent install of coilovers, we discovered that the toe of the rear wheels had an incurable +0.81 left and right toe. Unfortunately, with the stock toe arms, we could not dial out the toe. Therefore, creating a strong, more adjustable part was in order.

The Right to Bear (Stronger) Arms
The sophisticated (and some say complicated) rear suspension of the current E9Xs will undoubtedly be replicated by many other companies in the future. However, for those of us in the aftermarket, we're still learning about the little quirks of the suspension. By applying our experience with our E36 and E46 suspension components, Rogue have built arms that are strong and lightweight, while serving the needs of the rear suspension adjustments.

Rogue rear control arms are made from the highest quality components, from USA.

100% machined and anodized, 6061-T6 lightweight aluminum arms
High-strength, 3 piece, rod end (with carbon fiber reinforced, PTFE race) offers longer live for street use over standard rod ends
Seals-it Rod End Seals keep dirt, water and other contaminants out (Rogue Engineering is the ONLY company to incorporate this simple, yet effective item to extend the life of the rod end!)
Lighter than stock! (Stock is 875g, RE arms are 640g)
Extremely easy installation and adjustment



Estimated Volumetric Shipping Weight : 5.00 Kg