Crest Automotive Tuning - H) STYLING, BODYWORK & AERODYNAMICS: INTERIOR & EXTERIOR (* Including carbon fibre items, but please also see seperate Carbon Fibre section above ! )

Product Code: jkaxwidebody1-2

Click to Enlarge

Transform you 1 series with this high quality 100% Pre - preg carbon fibre widebody kit for the 1 Series coupe. This will fit all models on the coupe variant and is exclusive to Crest Automotive .

This kit includes:

- 4x wings / arches
- 2x skirts
- front bumper
- rear bumper
- bonnet
- bootlid
- 2x doors
- roof
- front splitter
- rear lower diffuser

PLEASE ENQUIRE FOR KIT OPTIONS AND PRICING. LISTED PRICE DOES NOT
INCLUDE SHIPPING COST.

PLEASE NOTE :
1. This kit was primarily designed for race use but is also suitable fro road use as you can see from the images.
2. Kit is made from pre preg "non sight" carbon so is not suitable for clear coat finish. A "sight" carbon finish can be supplied at extra cost, please enquire if this is required.
3. Entire kit weighs approx 48 kgs.
4. Kit can be supplied in primer at extra cost.
5. This kit is suitable for vinyl wrapping instead of painting following suitable preparation.

Estimated Volumetric Shipping Weight : 50.00 Kg

ARTICLE ON CARBON FIBRE WRITTEN BY CREST AUTOMOTIVE FOR PBMW MAG 2010

Product Code: mg135ibk

Click to Enlarge

The ultimate 135i Tuning lightweight GRP construction Bodykit for the E82 1er Coupe.

Consists of the following parts:

1x Frontbumper
1x Frontsplitter
2x Frontfenders
2x Sideskirts
2x Rear panels
1x Rearbumper

Suitable for use with the vented bonnet and CSL style rera boot lip listed elsewhere in this section.

*(Items in grey in the images show the panels for this kit)*

Estimated Volumetric Shipping Weight : 22.00 Kg

Click to Enlarge

This conversion kit from will give your 1 Series coupe or convertible the 1M aggression and pedigree without the price tag!

The complete kit consists of:

-Front bumper kit
-Side skirts set
-Rear bumper kit
-Front wings
-Rear wing extensions

At extra cost...
- Quad Exhaust (built to the car on site at workshop) £580.00
PLEASE SEE VARIATIONS SECTION (USE RED LINK BUTTON AT TOP RIGHT OF THIS LISTING)
- Genuine BMW trims and fittings such as air ducts, M side vents, wheel arch liners, front grille etc. approx. £350.00

Other parts such as Bonnet, Rear Spoiler, Rear Diffuser, Wheels, Suspension etc. are also available at extra cost, please enquire.

Estimated Volumetric Shipping Weight : 50.00 Kg

Click to Enlarge

We offer the full Flossmann genuine parts range for all BMW and Porsche models. If you dont see what you want here please do enquire.

THIS PAGE SHOWS DETAILS FOR THE E46 M3 WIDE BODY KITS, PLEASE SEE VARIATIONS SECTION ( red button at top right of this page) TO SEE MORE E46 KITS AS WELL AS OTHER BMW MODELS.

PRICE LIST LINK APPEARS AT BOTTOM OF THIS PAGE, BUT ALSO CALL OR EMAIL US FOR BEST UP TO DATE PRICING, AS CAN VARY WITH EURO EXCHANGE RATES.

The stunning Flossman widebody kits available in :

1. "Race" version GRP with epoxy resin
2. "Race" version in carbon fibre
3. "Road" version in GRP with epoxy resin

This listing is for the Carbon Fibre race version and includes several options which are detailed below for E46 M3 (See Variations Section for other versions) :

- Front bumper M3 with Fläps
- Front bumper M3 CSL with Fläps
- Front Fenders M3 + M3 CSL complete 2 pieces
- Sideskirts M3 + M3 CSL 2 pieces_CFK
- Rear Fenders M3 2 pieces_CFK
- Rear Fenders M3 CSL 2 pieces_CFK
- Rear bumper M3 with Fläps
- Rear bumper M3 CSL with Fläps
- ALMS-Style motorhood with vents
- Truck lid M3, reinforced for rear wing support
- Truck lid M3 CSL, reinforced for rear wing support
- Doors M3 + M3 CSL with frames 2 pieces
- Roof middle section
- Roofduct for passenger cabin ventilation
- Rearwings ITC 3-pieced (3planes 120cm wide )
- Rearwings GT 2-pieced (2planes 140cm wide )
- Rearwings GTR 1-pieced (1planes 180cm wide )
- Diffusor
- Enginebay cover, lower
- Tray for 120 litre fuel cell
- Mirror M3 with inboard ventilation

PLEASE NOTE : PRICES DO NOT INCLUDE SHIPPING FROM GERMANY.
Please call us to make your choice of parts and order.

CREST Flossmann Price List

Product Code: gke871seriesbp

Click to Enlarge

BMW 1 Series E87 Sedan

These body panels are made from the highest grade composite available and what makes these panels special is they have a fine balance between weight saving and durability.

We regularly supply all parts finish in a white gelcoat, However on request we can also offer the products in A carbon fibre finish.

Please look at the excel pricelist below for parts and prices available for this model.

Estimated Volumetric Shipping Weight : 1.00 Kg

GOKE CARBON PARTS PRICE LIST EXCEL
GOKE CARBON BODY PANELS ETC PDF

Product Code: manhart4-1

MANHART MH2 GTR
Click to Enlarge

MANHART MH5 800
Click to Enlarge

MANHART MH3 600
Click to Enlarge

MANHART MH2 Performance Kit
Click to Enlarge

MANHART MH8 800
Click to Enlarge

This page is still under construction. For more information, including product details, pricing and availability, please call or email us now.
Please note, prices may change subject to exchange rates and availability.

We now offer the full range of MANHART BMW performance parts, as an official MANHART distributor.
MANHART began perfecting and optimising BMWs more than three decades ago, offering unparalleled experience and expertise in the field. MANHART’s primary focus has always been the optimisation of BMW M cars, and this shines through in the products they create.
Many of MANHART’s most famous projects are technology swaps – a V8 E30, or an S85 in an E92 M3 – but they also offer a wide range of excellent upgrades, including carbon parts for exterior and interior uses; intake and exhaust systems; an extensive range of performance kits, and their specially designed MHTRONIK engine upgrade box.
As an official distributor for MANHART, we can provide the full range of MANHART BMW performance products, to suit whatever upgrades you are interested in. Contact us now for more information on pricing and specifics.
If you get a cheaper offer elsewhere, come back to us; we will always try to beat any other genuine quote!

Estimated Volumetric Shipping Weight : 1.00 Kg

Product Code: pde82pdmbk

Click to Enlarge

Prior design PDM1 aerodynamic kit for the E82/8 1 series Bmw.

Made from PU Rim (except rear widenings which are made from duroflex) this body kit will make your 1 series stand out from the crowd.

Kit contains:

- Prior-Design PDM1-WB front bumper
- Prior-Design PDM1-WB side skirts (2X)
- Prior-Design PDM1-WB rear bumper
- Prior-Design PDM1-WB front fenders (2X)
- Prior-Design PDM1-WB rear widenings
- Mounting material

All parts are available individually please see excel pricelist below

Estimated Volumetric Shipping Weight : 40.00 Kg

PRIOR DESIGN EXCEL PRICELIST