Crest Automotive Tuning - I) SEATS, ACCESSORIES, MOUNTS ETC

Product Code: vcbelt4d

Click to Enlarge

BMW Race Seat Installation Kits are by far the easiest and best way to mount race seats into your BMW... but if your looking to retain an OE three-point seat belt in a position that works for you, what do you do?

Our OE Factory Seat Belt to Floor Mount Kit includes the needed components to utilized factory belts after the original buckle/seat has been replaced using one of our Floor Mount Adapter sets or Race Seat Installation kits.
These can be bolted above or sandwich between FMAs for various driver preferences.
Includes:

•New OEM BMW seat belt buckle receptacle
•3-point mounting bracket (powder coated black)
•Needed hardware

PLEASE NOTE:
- This kit is for 4 DOOR & Z CAR models ONLY, for 2 door models please see alternate listing in same website section.
- Priced per EACH seat kit, if you have a pair of race seats you need to order TWO of these kits.
- The floor mount plates in the photos are NOT included in this kit, please see separate listing for these
- Please specify exact vehicle model when ordering

** YOU CAN ALSO buy the brackets shown here separately, to mount a race harness to such race floor mounts instead of factory seat belt system, or indeed to fit BOTH a race harness and factory belts simultaneously. Please enquire fro pricing for these options.

Estimated Volumetric Shipping Weight : 10.00 Kg

Product Code: vcbeltoe2d

Click to Enlarge

BMW Race Seat Installation Kits are by far the easiest and best way to mount race seats into your BMW... but if your looking to retain an OE three-point seat belt in a position that works for you, what do you do?

Our OE Factory Seat Belt to Floor Mount Kit includes the needed components to utilized factory belts after the original buckle/seat has been replaced using one of our Floor Mount Adapter sets or Race Seat Installation kits.
These can be bolted above or sandwich between FMAs for various driver preferences.
Includes:

•New OEM BMW seat belt buckle receptacle
•3-point mounting bracket (powder coated black)
•Needed hardware

PLEASE NOTE:
- This kit is for 2 door models ONLY, for 4 door and Z models please see alternate listing in same website section.
- Priced per EACH seat kit, if you have a pair of race seats you need to order TWO of these kits.
- The floor mount plates in the photos are NOT included in this kit, please see seperate listing for these
- Please specify exact vehicle model when ordering

Estimated Volumetric Shipping Weight : 10.00 Kg

Product Code: vmacafmsak

Click to Enlarge

Hugely popular Floor Mount Adapters for easy installation of race type seats such as Recaro, Sparco, Momo etc.

These CAD designed and CNC machined Billet Aluminum Floor Mount Adapters allow lowest install of any seat brackets available for lower centre of gravity. They are the best floor mount adapters available for your BMW.

-Adapts side mount seat brackets to the factory floor mounting points
-Lightweight design
-Mounting holes are slotted as opposed to other mounts that just have circular holes punched in them, means they can accommodate different width seats.

-Fully compatible with sliders
-Kit comes complete with all needed hardware
-Made from strong 6061-T6 Billet Aluminum

Available for E36/E46/E34/E39/E90/E92

Priced each seat .

Estimated Volumetric Shipping Weight : 2.00 Kg

Product Code: 7920150

Click to Enlarge

6-Point Harness Steel Submarine Bracket

Allows a secure anchor location for your 6-point harness submarine belts. For use with Macht Schnell Liteweight Floor Mounts.

Made from extremely strong and durable steel.

Features:
- Compatible with 5-point and 6-point harnesses
- Includes hardware
- Bolt-in installation

Models Supported:
2008+ E82 1-Series & 1M
1999-2006 E46 3-Series & M3
2006+ E9X 3-Series & M3
2003-2008 E85/6 Z4 & Z4M

Estimated Volumetric Shipping Weight : 10.00 Kg

Product Code: 7910101-7910100-7010111

Click to Enlarge

Race seats can offer a an immediate improvement in driver feedback keeping you planted to the seat and concentrated on driving, while offering a significant weight savings. However, most race seat companies leave it up to the driver for a mounting solution.

Macht Schnell Floor Mounts are designed for the serous track enthusiast in mind. CAD designed and machined from 6061-T6 aerospace aluminum, these mounts are as strong as they are light. Multiple mounting positions allow driver to dial in an exact seat position that is most comfortable and perfectly centered to the steering wheel.

As used by Track Car Performance Magazine (UK), among many others, see blog report here : http://z4mtimeattack.blogspot.co.uk/

Competition Liteweight Floor Mount Features:

- CAD designed and CNC machined from 6061-T6 aerospace aluminum
- Allows fitment for Recaro and most other race seats on the market
- Fully compatible with slider brackets
- Low profile allows for sliders or taller drivers allowing helmet clearance
- Black anodized finish for additional strength and corrosion/wear resistance
- Side provisions allows brackets (sold separately) for OEM seatbelt receptacle mounting or race harnesses
- Available in Black Anodized or Raw Aluminum finish
- Can be used on Driver or Passenger's side

- Sold as a set (one seat)

Fits all models listed below:

- 1992-1999 E36 3-Series & M3 (no convertible models) (79.10.101)
- 1999-2006 E46 3-Series & M3 (no convertible models) (79.10.101)
- 2003-2008 E85/6 Z4 & Z4M (79.10.101)
- 2007> E9X / X8X (79.10.100)
- 2012> F30/F31 3 series (70.10.111)
- 2014> F22/F23 2 series (70.10.111)
- 2014> F32/F33 4 series (70.10.111)
- 2015> F8X M3/M4 (70.10.111)

*(Please specify which colour and which model you require at time of ordering)*

Estimated Volumetric Shipping Weight : 15.00 Kg

Product Code: 701212xx

Click to Enlarge

HYBRID VERSION
Click to Enlarge

Allows a safe mounting point for OEM seat belt receptacles and/or bolt-in harnesses. Can run stock 3-point seatbelts, 4/6-point harnesses, or even both at same time. Perfect for those vehicles that see both Street & Track duty.

Crafted from high-grade steel with a durable black powedercoat finish.

Will fit models listed below:

- 2008+ E82 1-Series & 1M
- 1995-1999 E36 3-Series & M3
- 1999-2006 E46 3-Series & M3
- 2006+ E9X 3-Series & M3
- 2003-2008 E85 Z4 & Z4M

- (70.12.12X Hybrid Seatbelt /Harness Receptacles) per seat.
- When ordering please specify whether RH or LH seat, coupe or sedan, and if you wish to use the factory seat belt AND a harness simultaneously.

Estimated Volumetric Shipping Weight : 10.00 Kg

Product Code: 7920110

Click to Enlarge

Steel Seat Shell Adapter/Side Mount for Recaro Seats

Macht Schnell aluminum seat shell adapter/side mounts are required for mounting your RECARO seat to your floormounts or sliders.

Features:
- Allows RECARO seats to mount securely to floormounts
- Aluminum construction for strength and weight savings
- Black or clear anodized finish
- Multiple mounting holes offer fixed decline/recline adjustment
- Fits Pole Position, Profi, Profi XL, Pro Racer HANS SPG XL & Pro Racer SPA AL

Models Supported:
2008+ E82 1-Series & 1M
1999-2006 E46 3-Series & M3 (no convertible models)
2006+ E9X 3-Series & M3 (no convertible models)
2003-2008 E85/6 Z4 & Z4M

Estimated Volumetric Shipping Weight : 10.00 Kg

Product Code: psdantsubbrcktb

Click to Enlarge

Provides a secure anchor location for your 5 or 6 point harness submarine belts without the need to cut the chassis to install eye bolts. For use with Lightweight style Floor Mounts from VAC, Macht Schnell, PSDesigns

Made from extremely strong and durable laser cut 4mm thick 304 Stainless Steel.

Features:
- Compatible with all 5-point and 6-point harnesses
- Includes all required hardware (2 High tensile Eyebolts, 2 High tensile 7/16 UNF nuts, and 2 High tensile M8 flanged button head allen bolts)
- Bolt-in installation (bracket bolts under the floor mounts for extra safety)
- One Bracket required per seat/Harness.

Estimated Volumetric Shipping Weight : 3.00 Kg

Product Code: psdantsubbrcktr

Click to Enlarge

Product Code: psdhrmlapblt

Click to Enlarge

Designed to allow users to mount harness lap belts along with the OEM seat belt receptacles on the same bracket.

Manufactured from 4mm hi-strength steel and powder coated black.

Also available in Stainless Steel at additional cost (special order). Designed to work with or without seat runners and as a consequence have a large range of fitment applications for people running aftermarket seats in all BMW's and other Marques/Models with seats that utilise side mounts. These locate between the runner and the seat mount making their application universal.

suitable for E36/E46 & E9X/E8X

Please state which vehicle model you are ordering for.

Estimated Volumetric Shipping Weight : 3.00 Kg

Product Code: vclbrkt

Click to Enlarge

This simple bracket set lets you enable an easy install of a snap-in, or eyelet bolt type harness. This kit allows the fastest installation of race harness lap belts directly to VAC / MACHT SCHNELL ETC Floor Mount Adapters. With this bracket set, our Anti-Sub Mounting Bracket, you can now install your racing harness of choice into your BMW without drilling ANY holes. These brackets simply install between the floor mounts and your floor pan so no extra installation time is needed and they totally eliminate drilling into the chassis as was previously the only option. They can be installed on driver or passenger side.

Includes:
(L & R set) CNC bent and cut Heavy-duty brackets, power coated black for durability.

NOTE: We also offer OEM seatbelt receptacle adapters to work with this, please see separate listing in this section.

Estimated Volumetric Shipping Weight : 1.50 Kg