Click to Enlarge

* THIS LISTING IS FOR THE STANDARD ROD END VERSION *

RE part number re.e9x.cam

For those drivers looking for the adjustability in the rear of their E8X/E9Xs, we are proud to offer you our Adjustable Rear Camber Link Set.

These replace the wishbone and guide rod links in the factory suspension which have rubber bushings and limited adjustability.

These rear links feature 6061-T6 anodized aluminum links and feature rod ends with carbon fiber lined races. The 303 Stainless rod end inserts offer strength and corrosion protection for long lasting performance.

For dedicated race cars, we offer upgraded high strength rod ends at additional cost.

Please now refer to Variations section by using the red link button at top right of the page to access info on different options / models.

Recommended for those who drive their vehicles at the track.

Professional installation recommended.

Includes set of four (4) links.

An alignment is required after installation.

These are a direct bolt in for the following vehicles:

•All E8X 1-Series, including 1 M Coupe
•All E9X 3-Series, including M3


Estimated Volumetric Shipping Weight : 10.00 Kg

 

Click to Enlarge

ROGUE ENGINEERING E9X E8X REAR HEIGHT ADJUSTERS (PAIR)

RE part number re.e9x.sp

These adjustable height rear spring platforms, designed to work with 60mm inner diameter coilover rear springs mounted in the stock spring location at the rear of a BMW E8x (1 series) or E9x (3 and M series). The thread used is self locking once any load is applied.

Made from 6061-T6 aluminum, these are anodized to prevent corrosion. These can be adjusted from a minimum of 0.5" thick to a maximum of 2.75" thick. These can be adjusted independently of each other and is great for corner balancing of your BMW.

Designed to ride on the stop of the spring in an E8X/E9X. The locating stub fits in the factory location and replaces the bulky factory locating stub/hat, which inhibits ride height adjustment with other similar rear ride height adjusters.

Sold as a pair

Estimated Volumetric Shipping Weight : 3.00 Kg

 

Click to Enlarge

ROGUE ENGINEERING F8X M2 M3 M4 ADJUSTABLE SWAYBAR LINK (PAIR)

RE part number re.sblf8x m2/m3/m4

After years of planning and sourcing, Rogue Engineering have finally developed a product worthy to call their own. The Rogue Engineering Adjustable Swaybar Links!

What makes their Adjustable Swaybar Links different from the rest? Here are some of the features:

- METRIC stud and rod ends! No more 3/8" rod ends for your metric BMW!
- US-made ball is 52100 Bearing Steel, Heat Treated, Precision Ground and Hard Chrome Plated.
- Housing is zinc plated for corrosion resistance. Left and right hand threaded.
- 6061-T6 ACQ link is anodized and left and right hand threaded for easy adjustments on the car.
- Grease fittings on each rod end means quick and easy maintenance!
- Sold as a pair



Estimated Volumetric Shipping Weight : 3.00 Kg