Variant 1, 2 and 3
Click to Enlarge

Click to Enlarge

CLUBSPORT
Click to Enlarge

STREET COMFORT
Click to Enlarge

DDC ECU COILOVERS
Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

VARIANT 3
Click to Enlarge

DDC ECU FOR F10 M5
Click to Enlarge

Click to Enlarge

kW V4
Click to Enlarge

KW Height Adjust Kit
Click to Enlarge

HLS Suspension
Click to Enlarge

The highest quality materials are used to produce individual suspension solutions that enable customers to adjust vehicle height according to their wishes and needs. Within the TÜV-tested adjustment parameters, this can be easily achieved using the purple-colored aluminum spring collars by adjusting the position of the yellow coated springs upwards or downwards via a specially designed exterior thread.

The stainless steel strut housings are employed, and are available in three different damping technologies. The complete systems including high-quality yellow springs, purple aluminum components and Elastomer bump stops with integrated dust protection system, provide a unique comprehensive solution for a personalized vehicle suspension system that meets all performance and quality demands.

KW offer Coilover suspension systems in the following options:

Variant 1:
The ideal system for customers wishing to rely on the experience of our engineers yet determine their own degree of lowering. In extensive driving tests our engineers have set the dampers for the best balance between sporty driving, comfort and safety.

Variant 2:
The system intended for the experienced driver who requires to not only determine the individual lowering of their vehicle, but adjust the damper setting to fine tune the system to their needs. The adjustable damper rebound settings allows adjustment of the pitch and roll behavior of the vehicle, adapting it to one‘s own driving preferences.

Variant 3:
The new Variant 3 is state-of-the-art technology for the skilled and experienced driver. The separate and independent compression and rebound damping options allow a truly individual driving set-up. These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed range, while the highspeed set-up, so decisive for driving comfort, has been preset by our engineers.

Variant 4 :
With the KW Variant 4 coilover suspension “inox-line” we combine our leading racing technology with a significant increase of everyday suitability for numerous high-performance vehicles. This enables an independent adjustment of the rebound stage damping as well as low-speed and high-speed compression stage damping. KW supplies the Variant 4 with a vehicle-specific performance setting. With the adjustable dampers, drivers can – if necessary – quickly change to a comfort setting by using the integrated setting dials on the damper.

Street Comfort:
KW street comfort in stainless steel technology “inox-line” are developed especially for ambitious customers who demand comfort,safe driving quality but with discreet and individual lowering adjustment. The vehicle can be height adjusted from 5-45 mm on front and rear axle. All coilover kits are equipped with a shock absorber which can be adjusted in rebound damping for more comfort.

Clubsport:
Nürburgring Nordschleife is the most popular race track for using our KW Clubsport suspension kits. High performance sports cars,modified saloons as well as classical sport compact cars are tuned in weight, engine and wheels for their use on several race tracks.
These improvements are made for a better handling on track sport events, race taxi drives, visitor drives and equability tests particularly on the Nürburgring Nordschleife. Due to these modifications of the car some parameters are changing. Therefore, the road setups are
no longer ideal for the performance of the car. For this use we offer special clubsport kits which have been adapted to the changed requirements by changing spring and shock setup as well as the installation of racing top mounts.

Competition Suspension Kits
The KW Clubsport coilovers utilize the uncompromising transfer of technology from the world of
motorsports to track day/street driving.

KW Competition coilovers are the number one choice for many top international race teams. The excellent combination of performance, affordability , and standing history of successful championships claimed by KW racing technology confirm that KW Competition kits are the leading suspension in its class when it comes to performance and quality.

The versatility of the KW Competition suspension kits accommodate a broad range of different pavement surfaces, radius of turns, and elevation changes. The KW Competition kit has been the mainstay of many top teams racing at the most demanding race track in the world - Nurburgring Nordschleife, aka the "Green Hell".

Whether in the VLN, 24h Nürburgring, GT Asia, WTCC, FIA GT1, ADAC Procar - motorsports teams everywhere rely on the suspension know-how of KW Competition.

- KW 2-way competition racing suspension
KW Competition 2 way suspension kits feature independent rebound and compression damping. They can be constructed out of galvanized steel housings when structural strength is a concern or lightweight aluminum when weights savings is advantageous. The following damper versions are available:-

-Independently adjustable rebound and compression damping technology
-Stainless steel technology "inox-line"
-Continuous lowering
-Tested adjustment range
-High-quality components for a long-term durability
-Adjustable rebound damping with 16 precise clicks
-Adjustable compression damping with 12 precise clicks
-Unique independent damping force adjustment
-Optional spherical bearing aluminum top mounts

The rebound adjustments are made at the end of the piston rod end and provide 16 precise clicks of adjustment. The compression adjustment is located at the bottom of the damper or on the reservoir and provides 12 exact clicks of adjustments. IN addition to a wide range of suspension systems. Custom orders can be accommodated for nearly every type of race car.

- KW 3-way Competition racing suspension
The KW competition 3-way racing coilovers provide 3 independent features of adjustment, low-speed rebound as well as high and low-speed compression adjustment. The unique valve technology of the 3-way damper system differs from the conventional mono-tube damper shim package valve technology. This design also provides a maintenance-friendly damper system.

Versatile in its design, the damper system performance remains consistent even through a high temperature environment, and has proven to be reliable. The Competition 3-way systems are designed on the mono-tube damper principle with an adjustable reservoir. Rebound adjustments are made through an adjustable needle on the pre-adjustable valves. Depending on the version (18 or 22 clicks), the compression level in the low-speed and high-speed range can be adjusted. The standard compression level is controlled by a pre-configurable blow-off valve. The 3-way Competition kits are constructed of high-strength aluminum. McPherson front struts are constructed as inverted dampers with 40mm and 45mm/55mm (for rally use) guiding tube diameters. Steel construction is an option for endurance racing applications.

KW Height Adjustable Spring Kit
The springs with continuous lowering

The KW height adjustable spring kit is used for lowering of the vehicle in combination with the standard dampers. Unlike to conventional spring kits, a customized height adjustment is possible within the tested adjustment range. For this solution, vehicle-specific spring seats with adapted KW lowering springs and matching elastomers as well as dust protection systems are used. The standard damper system for example with electronic or hydraulic control, continues to remain active.

Setup – sporty harmonic spring rates
The used high-quality springs made of chrome-silicon steel for the KW height adjustable spring kits are adapted in their spring rate vehicle-specifically to the respective standard suspension damper and wheel loads. When developing the respective spring sets, we also take into account that the spring rates harmonize perfectly with the various damper characteristics of your adaptive standard suspension. So even with a KW HAS you can experience your car more directly and dynamically. The KW coilover springs are suitable for automobile drivers who want to decently lower their car while taking advantage of an individual adjustment range.

Continuous lowering
Similar to a coilover suspension, also the height-adjustable KW springs allow a continuous lowering within a decent range. This is not possible with conventional lowering springs. The dust protection elements and spring perches included in the delivery are always adjusted to the maximum possible lowering. So with the height-adjustable KW springs, a sporty and harmonious driving behavior can be realized without the driving dynamics of performance-oriented vehicles is suffering.

As with all KW suspension solutions, the engineers at KW develop in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post rig the vehicle-specific KW suspension setup estimated by car enthusiasts worldwide. When developing the respective spring kits, we consider that the spring rates also harmonize perfectly with the various damper characteristics of your adaptive standard suspension. So you will experience your car even more directly and dynamically with our KW height adjustable springs.

KW DDC coilover kit "DDC ECU"

The KW DDC (Dynamic Damping Control) coilover kit with ECU (Electronic Control Unit) was developed for individual lowering and installation of an electronic damping control system. The scope of delivery contains a KW inox-line coilover kit with electronically controlled dampers, a high-performance control unit, the car specific cable set with control switch and a detailed manual for an easy installation.

The KW DDC coilover kit has three car specific developed damper settings. By the push of a button the driver can choose between the Sport basic setup, a very Sporty and performance-oriented Sport + setup and the Comfort mode for un-even/poor road surfaces. The height adjustment of KW coilover kits also allow an individual lowering within the TÜV-tested adjustment range.

KW "DDC App" (only for DDC ECU)

Optional for KW DDC ECU solutions available damping control for iPhone, iPod or iPad. With the DDC app you can also save up to five own individual setups programmed by yourself, and share them with your friends via e-mail. A variable damper setting of 0% (maximum comfort) up to 100% (maximum Sport+), as well as the separate damper setting for front and rear axle is possible and will be transmitted via iPhone within milliseconds to the dampers. For the communication between iPhone and KW DDC control unit, a KW DDC W-LAN module is required.

KW HLS
KW Hydraulic Lift System – makes your super-sportscar suitable for daily use.

Because of their low center of gravity, many super cars have less ground clearance. In order to be able to drive over speed bumps or steep ramps in parking garages without any problems, we have developed the KW Hydraulic Lift System. At the touch of a button the HLS system lifts vehicles by up to 45 millimeters allowing obstacles to be negotiated without a problem. Compatible with our KW coilover suspension or with the original suspension depending on vehicle type and application.

KW HLS Lift kit – continuous lowering and more ground clearance at the push of a button
With the HLS Lift Kit, obstacles such as parking garages, garage entrances, speed bumps or rough roads are no problem even for lowered vehicles or vehicles with little ground clearance. The vehicle equipped with the lift kit can be lifted by up to 45 mm in order to drive over obstacles that would not be possible with the normal vehicle height. Depending on the vehicle type and model, the lift kit is available as a vehicle-specific solution or as an individual conversion kit.

The lift kit is available in two different versions:
- HLS 2, which is installed on the front axle
- HLS 4, which can also be installed on the rear axle if required, allowing the entire vehicle to be lifted.

The hydraulic cylinder unit is mounted on the coilover suspension between the spring plate and the spring. The advantage of a hydraulic system is that during driving no compression (movement) of the extended cylinder unit (no unwanted additional suspension) occurs.

The KW HLS lift kit is available as a complete suspension solution in combination with a KW coilover suspension or as a retrofit kit for standard suspension systems as well as KW coilovers, consisting of springs, adaptations, hydraulic cylinders and complete control unit.

KW HLS Lift Kit Individual – more ground clearance at the push of a button for lowered cars.

The KW HLS lift kit individual universal conversion kit is installed in combination with a coilover kit. The hydraulic unit which lifts or lowers the vehicle is mounted between the spring plate and the spring. The required installation space for the cylinder unit is 65 mm.

For vehicles with little ground clearance to easily get over obstacles
Can be activated while driving (up to 80 km/h)
Fast lifting (4-5 seconds HLS2; 6-8 seconds HLS4)

Continuous lowering
The KW HLS system allows in combination with a KW coilover kit a maximum or in combination with KW height adjustable springs and decent lowering within the tested adjustment range. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuous lowering can be varied quickly and easily, even after years.


PLEASE REFER TO APPLICATION AND PRICE LIST LINK BELOW AND CALL OR E MAIL US TO MAKE YOUR ORDER OR ASK ANY QUESTIONS .

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

KW height adjustable springs kits are a great alternative to conventional springs. You don’t have to be satisfied with a fixed lowering as you can adjust the height with the KW height adjuster even after the kit has been installed.

Your vehicle does not only get a more dynamic look with the KW height adjustable spring kit, but also the steering behaviour and response of the standard dampers becomes more agile. All driver assistance systems and comfort features of an adaptive series suspension remain with our vehicle specific developed spring set up.
No more 30-30 or 40-40!

With conventional lowering springs you have to decide on the lowering from the beginning, but not with the KW height adjustable spring kits. Depending on the vehicle specific application you can change the lowering within the adjustment range with the threaded spring perch when the springs are already installed. For example, the KW height adjustable spring kit for an Audi S5 allows you to lower the car in the range of 5-35 mm. You will not have any difficulties to adjust the lowering when changing your wheel/tire combination.
OEM Quality

The from KW used high-quality springs made of chrome-silicon steel are at the KW coilover spring kits in their spring rates vehicle specific adjusted to the respective standard suspension dampers and wheel loads. At the development of the respective spring kits we consider that the spring rates will perfectly harmonize with the different damper characteristics of your adaptive series suspension.

With their high quality (surface) finish as well as the KW height adjuster, our KW height adjustable spring kits delivery content always includes the vehicle-specific bump stops with dust protection system to protect your standard suspension against tear & wear caused by spray and salt.

-individual height adjustment of the standard suspension kit
-adaptive damper control remains active
-vehicle specific spring rates-
-better steering behaviour
-improved looks

Estimated Volumetric Shipping Weight : 1.00 Kg