Crest Automotive Tuning - A) ENGINE PERFORMANCE (See also forced induction & remapping sections)

Product Code: bmcrpfoem

Click to Enlarge

E60 M5
Click to Enlarge

High flow / high performance air filters that simply replace the factory original versions within the factory airbox.

PERFORMANCE
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

ADVANCED TECHNOLOGY
BMC technical staff has developed a particular production system based on soft rubber moulding which produces the familiar BMC red filters. They are made in one single piece with no welded joints in the corners, thus avoiding breaking risks. This system, called "Full Moulding" comes from R&D in F1 and it is significant of BMC air filters' technical and quality specifics.

PLEASE REFER TO EXCELL PRICE AND APPLICATION LIST BY CLICKING THE LINK BELOW.

BMC DIRECT REPLACEMENT PANEL FILTERS PRICE LIST

Product Code: clm54itkmnf

Click to Enlarge

BMW M54 High Performance Intake Manifold

- Very high quality engineering & construction
- improved volumetric flow and performance
- Available in Silver and Black.
- Internal velocity stacks
- "Pug and Play" installation to the factory engine layout
- Uses OEM specification / size injectors

Please be aware that the price of this product may change according to US Dollar exchange rate fluctuations. Please enquire for the latest information on pricing and availability

We will always try to beat any other genuine quote!

Estimated Volumetric Shipping Weight : 1.00 Kg

Product Code: cln52itkmnf90

Click to Enlarge

PLEASE NOTE, Regarding the injectors, you can install 2 types of different length of injector, 14mm variety.
Click to Enlarge

Injectors
Click to Enlarge

Click to Enlarge

BMW N52 Performance Intake Manifold & Fuel Rail set

- Very high quality engineering & construction
- Improves volumetric flow and performance
- Available in Silver and Black.
- To suit OEM 90mm size throttle body size
- Fuel rails included
- "Pug and Play" installation to the factory engine layout
- Uses OEM specification / size injectors
- O-ring seals replace the OEM metal gaskets for a better seal

NOTES :
Clumate fuel rails are not universal ones, and they ONLY fit Clumate's intakes, they wont fit even the OEM intakes. Other brands fuel rails will not fit Clumate's intakes either.

Product Code: cln54itkmnf

Click to Enlarge

PLEASE NOTE, Regarding the injectors, you can install 2 types of different length of injector, 14mm variety.
Click to Enlarge

Injectors
Click to Enlarge

DYNO 2
Click to Enlarge

INSTALLATION
Click to Enlarge

Click to Enlarge

High Performance Intake Manifold, fuel rail and throttle Body kit, for the N54 engine; VERSION 1. Direct Port Injection Design.
(Please also see alternate design Version 2 also listed in this section, equal performance but different aesthetics etc.)

- Very high quality engineering & construction
- Improves performance
- Available in Silver and Black.
- Fuel rails included
- "Plug and Play" installation to the factory engine layout and charge / boost pipes
- Uses OEM specification / size injectors
- O-ring seals replace the OEM metal gaskets for a better seal .

NOTES Regarding Injectors and rails :

- There are TWO options regarding injectors for this conversion as follows :
1) Choose the complete intake Kit which includes injectors ports in the plenum, together with the dedicated fuel rail to install longer aftermarket performance injectors.
2) Choose the Intake manifold option Without injector ports on the plenum, to replace the OEM manifold only but retain OEM fuel rail.

- Clumate fuel rails are not universal ones, and they ONLY fit Clumate's intakes, they wont fit even the OEM intakes. Other brands fuel rails will not fit Clumate's intakes either.

Product Code: cln54itkmnf80

Click to Enlarge

PLEASE NOTE, Regarding the injectors, you can install 2 types of different length of injector, 14mm variety.
Click to Enlarge

Injectors
Click to Enlarge

Click to Enlarge

High Performance Intake Manifold, fuel rail and throttle Body kit for the N54 engine, VERSION 2, PORT INJECTION DESIGN.
(Please also see alternate Version 1 also listed in this section, equal performance but design is more similar to OEM) .

- Very high quality engineering & construction
- Improves performance
- Available in Silver and Black.
- Fuel rails included
- "Plug and Play" installation to the factory engine layout
- Uses OEM specification / size injectors
- O-ring seals replace the OEM metal gaskets for a better seal .

NOTES Regarding Injectors and rails :

- There are TWO options regarding injectors for this conversion as follows :
1) Choose the complete intake Kit which includes injectors ports in the plenum, together with the dedicated fuel rail to install longer aftermarket performance injectors.
2) Choose the Intake manifold option Without injector ports on the plenum, to replace the OEM manifold only but retain OEM fuel rail.

- Clumate fuel rails are not universal ones, and they ONLY fit Clumate's intakes, they wont fit even the OEM intakes. Other brands fuel rails will not fit Clumate's intakes either.

Product Code: grpm

Unfortunately we can no longer sell or recommend Gruppe M due to recent negative experiences, including:
- Extremely poor service.
- Stealing customers by making direct sales to them behind our back.
- Dishonesty.
- Shipping intake kits with missing parts and refusing to correct their oversight.

Estimated Volumetric Shipping Weight : 1.00 Kg

Product Code: hopdisa-1

Click to Enlarge

Needing to simplify your M54 intake system?
This plug will allow you to completely remove the often troublesome DISA system from the manifold.

The design has been tested to over 1.5b of positive pressure and seals using a high-temperature- and oil-resistant vitton o-ring.

This plug fits the majority of intake manifolds, however - there is a rare chance that your manifold holds a smaller diameter of DISA - These blanks are 61mm diameter, please check your manifold if you’re unsure of the size on your manifold.

Features :

-CNC-machined billet aluminium
-High-temp, oil-resistant vitton o-ring
-Available with or without a MAP sensor mount (fits 3b MAP sensors from Bosch)
-Maximum 10 minutes to fit

Estimated Volumetric Shipping Weight : 0.50 Kg

Product Code: manhart-2

MANHART MH2 GTR
Click to Enlarge

MANHART MH5 800
Click to Enlarge

MANHART MH3 600
Click to Enlarge

MANHART MH2 Performance Kit
Click to Enlarge

MANHART MH8 800
Click to Enlarge

This page is still under construction. For more information, including product details, pricing and availability, please call or email us now.
Please note, prices may change subject to exchange rates and availability.

We now offer the full range of MANHART BMW performance parts, as an official MANHART distributor.
MANHART began perfecting and optimising BMWs more than three decades ago, offering unparalleled experience and expertise in the field. MANHART’s primary focus has always been the optimisation of BMW M cars, and this shines through in the products they create.
Many of MANHART’s most famous projects are technology swaps – a V8 E30, or an S85 in an E92 M3 – but they also offer a wide range of excellent upgrades, including carbon parts for exterior and interior uses; intake and exhaust systems; an extensive range of performance kits, and their specially designed MHTRONIK engine upgrade box.
As an official distributor for MANHART, we can provide the full range of MANHART BMW performance products, to suit whatever upgrades you are interested in. Contact us now for more information on pricing and specifics.
If you get a cheaper offer elsewhere, come back to us; we will always try to beat any other genuine quote!

Estimated Volumetric Shipping Weight : 1.00 Kg

Product Code: hopmap-1

Click to Enlarge

Under forced induction use, the original MAF from BMW cannot read high enough air flow values for reliable use at high load. The MAP conversion is a simple, cheap and reliable alternative which takes less than 10 minutes to convert to.

Unlike with earlier versions of this kit, you now have no need to open the ECU and solder and de-solder certain pins - everything is “plug and play” and can easily be returned to standard at a later date if required.

Please note: This conversion can currently only be used with the Siemens MS43 ECU (standard for most M54 engines).
You will need to tune the engine ECU after fitting this kit.
If you choose not to use the MAP sensor mount, note that the sensor needs to receive pressure reference from the manifold itself - it cannot be mounted downstream from the throttle body.

What’s included:

-MAF to MAP conversion loom (plug in and forget - no soldering required)
-Genuine Bosch MAP sensor
-DISA blanking plate with MAP sensor mount (fits all M54B30 intake manifolds - check the diameter of the DISA hole if you’re using an M54B28, B25 or B22 manifold before ordering)
-Step-by-step instructions for completing the conversion (you will have to move some pins inside the ECU box, but do not have to open the ECU housing itself.)
-Works for both forced induction and normally aspirated builds

Estimated Volumetric Shipping Weight : 0.50 Kg

Click to Enlarge

RPi's Ram Air Induction converts your factory intake system into a ram air type for better performance.

Other aftermarket induction kits mostly suck in hot air causing a loss of performance. The use of heatshields are not very affective as heat shields mainly work to block radiant heat only.

Utilizing the factory intake boxes, expect a 6-10whp gain with 70mph airflow.

Available for :

-E60/61 525,530,540,545,550
-E63/64 630,640,645,650

This kit includes:

- Hi Flow BMC panel filter
- RPI metal ram scoop
- Mounting hardware

This listing is for the complete ram kit, for scoop kit only without filter please refer to "Variations" section by using red link button at top right.

PLEASE NOTE : Prices can vary according to Global currency exchange rates, so please contact us if you see same item cheaper, we will beat any other quote !

Estimated Volumetric Shipping Weight : 2.00 Kg