Crest Automotive Tuning - A) ENGINE PERFORMANCE (See also forced induction & remapping sections)

Product Code: psdfrtscp

Click to Enlarge

Manufactured from Carbon Fibre and available in a range of different weaves/finishes including 1x1 plain, 2x2 twill and Carbon Kevlar.

The PSDesigns Ram Air Scoop has been designed to work with all intake systems and locates in the front grill of the E46M3 and helps to “ram” air into the engines induction/air intake system.

Not only does the scoop provide a fresh supply of cold air to the induction system/air intake they also offer cosmetic enhancement to the front of the vehicle. The scoop is visible through the kidney grills in the bonnet.

Included:
1 PSDesigns Ram Air Front Scoop.

Estimated Volumetric Shipping Weight : 4.00 Kg

Product Code: psdhdlghtdctkt

Click to Enlarge

This item will fit all Pre-Facelift BMW E46 Series models and ALL BMW E46 M3's 2000-2006

The PSDesigns Headlight Duct Kit has been designed to work with all intake systems. The kit replaces the main-beam bowl of the OEM headlight on Pre-Facelift E46’s, E46M3’s and M3 CSL’s, this kit includes all the required components to convert the standard headlight to a ducted version, including a specifically designed canbus error deletion resistor (no error lights on the dash board).

The Duct provides a fresh supply of cold air to the induction system/engine bay. The duct also gives a very aggressive yet subtle visual enhancement to the front end of the vehicle. The ducts can be produced for either side of the vehicle (left hand or right hand), so could be used to help cool ignition coils for example with the correct ducting from a duct in the right hand headlight.

PLEASE NOTE:
This kit requires cutting of the Main Beam Headlight Bowl and headlight lens , this is covered in the provided instructions.

Please chosse fro these options :

- Left hand headlight 1 x 1 carbon weave
- Left hand headlight 2x 2 carbon weave
- Right hand headlight 1 x 1 carbon weave
- Right hand headlight 2x 2 carbon weave

This kit is made to order with a two to three week lead time.

Included:
- 1 PSDesigns Carbon Fibre Duct
- CanBus Error delete Resistor
- Edge Trim
- Installation Instruction

Estimated Volumetric Shipping Weight : 4.00 Kg

Product Code: psds54vlctstck

Click to Enlarge

Our Increasingly popular S54 Velocity Stack Conversion, the most complete conversion available for the BMW S54 Engine, as found in several BMW M Cars including the E46 M3 and the Z4M.

The Kit includes all mechanical components to convert the engine to Velocity Stacks.

Kit Contents:
- 6 Intake trumpets (Velocity Stacks) painted in a colour of your choice (heat resistant paint and lacquer)
- Carbon Fibre Heat shield
- Billet Oil Catch tank
- Oil Pipes and clamps
- Polished AN Hose finishes
- 6 ITG Velocity Stack Air Filters
- Idle Control air Filter
- IAT (intake air temperature) Sensor and wiring harness
- Silicone Intake Boots x6
- Air Feed Pipe
- Jubilee Clamps x12
- Silicon Vacuum Line Blank
- Billet Oil Return Feed Blank and pipe
- Cable ties, fixings and connectors
- Fitting Instructions and after sale support

**The conversion REQUIRES an ALPHA-N MAP, similar to a CSL airbox**

Estimated Volumetric Shipping Weight : 8.00 Kg

Product Code: psde46e39tmpssr

Click to Enlarge

This kit allows for the simple fitment of an air inlet temperature sensor. Usually the air temperature is read by the MAF sensor, unfortunately the sensor is prone to ‘heat soak’, causing incorrect readings which decrease performance.

By relocating the temperature sensor this allows for more accurate readings – this is also required when running an AlphaN map in conjunction with a CSL airbox or Our Velocity Stack Conversion (this is included with our Velocity Stack Kit, see our other listings for details.)

Kit includes:
- BMW Temperature Sensor with Nut.
- Loom
- Installation Instructions.

Estimated Volumetric Shipping Weight : 2.00 Kg