Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

LOST THE LOCKING WHEEL BOLT KEY?

BROKEN THE LOCKING WHEEL BOLT KEY?

High security spinning ring wheel lock bolt is stuck from being rounded, stripped and/or the key is broken or missing. You’re unable to remove wheel lock bolt with normal wheel lock socket.

Old solution:
Grinding, drilling and welding will usually result in damaging the wheel. The removal is very difficult, time consuming and expensive.

THE NEW SOLUTION
The AGA Wheel Lock Removal Tool allows you to remove the high security with spinning rings wheel lock bolt in a few minutes, without the need of key and leaving no damage to the wheel.

Benefit:
Avoid the expensive wheel repair or even replacement, saving time, money, effort and keeping customers happy.

Fits all vehicles equipped with a spinning ring high security wheel lock bolt. This bolt is particularly common on BMW vehicles.

Additional Tools Needed:
Slide hammer with 5/8-18 thread adapter, brass hammer, breaker bar with 17mm socket.



Estimated Volumetric Shipping Weight : 3.00 Kg

 

Click to Enlarge

Conical Seat to Ball Seat Adapter

- Converts 60 degree conical seat nuts to ball seat
- Can be used with all Crest TECH standard conical and extended race nuts
- Can be used with all thread sizes, 12 x 1.5, 14 x 1.5, and 14 x 1.25
- Inserts between wheel and conical nut
- Manufactuered from hardended steel
- Zinc plated
- Outer diameter, 22.8mm.
- Inner diameter, 15.2mm.
- Height, 6.3mm
- Each kit consists of 20pcs.

Tips for use
- To ensure safe use, when installing, make sure that you get at least 6.5 turns when tightening nut
- Re-check torque after first 20 - 100 miles of service and re-torque as required to 85 - 88ftlbs

Estimated Volumetric Shipping Weight : 1.00 Kg

 

CREST TECHNOLOGIES EXTENDED STUD KIT
Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This listing is for Black 44mm length (12mm x 1.5mm thread pitch) studs with Black nuts, to be used in standard applications without spacers.
CA Stud conversion kit. Replaces your wheel bolts with studs and nuts, providing several advantages over the OEM wheel bolts:

- Lighter and stronger fixing method.
- Makes fitting / re fitting wheels MUCH easier and quicker.
- Prevents you from cross threading your wheel hubs, an expensive fix compared to the cost of these stud conversions. If you cross thread these studs on the wheel side, just replace the stud.
- Various size spacers can be used with the same stud kit (size range depending on which length kit chosen), no need to buy different length bolts when you remove / change size of spacers.

Features include:

- OEM Style Black Zinc Finish
- Bullet Nose
- TUV Approved
- 12x1.5 Thread
- Made in Europe
- 10.9 grade hardness

ALSO AVAILABLE IN SILVER. PLEASE STATE CHOICE WHEN ORDERING.

Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

CREST TECHNOLOGIES EXTENDED STUD KIT
Click to Enlarge

This listing is for Black 68mm length (12mm x 1.5mm thread pitch) studs with Black nuts, to be used with spacers up to 12mm width.

Please note, unlike most other kits, ours include :
- Full install & Torque guide,
- Allen Key
- Loctite Thread sealant

CA Stud conversion kit. Replaces your wheel bolts with studs and nuts, providing several advantages over the OEM wheel bolts:

- Lighter and stronger fixing method.
- Makes fitting / re fitting wheels MUCH easier and quicker.
- Prevents you from cross threading your wheel hubs, an expensive fix compared to the cost of these stud conversions. If you cross thread these studs on the wheel side, just replace the stud.
- Various size spacers can be used with the same stud kit (size range depending on which length kit chosen), no need to buy different length bolts when you remove / change size of spacers.

Features include:

- OEM Style Black Zinc Finish
- Bullet Nose
- TUV Approved
- 12x1.5 Thread
- Made in Europe
- 10.9 grade hardness

ALSO AVAILABLE IN SILVER. PLEASE STATE CHOICE WHEN ORDERING.

Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

CREST TECHNOLOGIES EXTENDED STUD KIT
Click to Enlarge

This listing is for Black 68mm length (14mm x 1.25mm thread pitch) studs with Black nuts, to be used with spacers up to 12mm width.

Please note, unlike most other kits, ours include :
- Full install & Torque guide,
- Allen Key
- Loctite Thread sealant

CA Stud conversion kit. Replaces your wheel bolts with studs and nuts, providing several advantages over the OEM wheel bolts:

- Lighter and stronger fixing method.
- Makes fitting / re fitting wheels MUCH easier and quicker.
- Prevents you from cross threading your wheel hubs, an expensive fix compared to the cost of these stud conversions. If you cross thread these studs on the wheel side, just replace the stud.
- Various size spacers can be used with the same stud kit (size range depending on which length kit chosen), no need to buy different length bolts when you remove / change size of spacers.

Features include:

- OEM Style Black Zinc Finish
- Bullet Nose
- TUV Approved
- 14x1.25 Thread
- Made in Europe
- 10.9 grade hardness

ALSO AVAILABLE IN SILVER. PLEASE STATE CHOICE WHEN ORDERING.

Estimated Volumetric Shipping Weight : 5.00 Kg

 

CREST TECHNOLOGIES EXTENDED STUD KIT
Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This listing is for Black 75mm length (12mm x 1.5 thread pitch) studs with Black nuts, to be used with spacers up to 15mm width.

Please note, unlike most other kits, ours include :
- Full install & Torque guide,
- Allen Key
- Loctite Thread sealant

CA Stud conversion kit. Replaces your wheel bolts with studs and nuts, providing several advantages over the OEM wheel bolts:

- Lighter and stronger fixing method.
- Makes fitting / re fitting wheels MUCH easier and quicker.
- Prevents you from cross threading your wheel hubs, an expensive fix compared to the cost of these stud conversions. If you cross thread these studs on the wheel side, just replace the stud.
- Various size spacers can be used with the same stud kit (size range depending on which length kit chosen), no need to buy different length bolts when you remove / change size of spacers.

Features include:

- OEM Style Black Zinc Finish
- Bullet Nose
- TUV Approved
- 12x1.5 Thread
- Made in Europe
- 10.9 grade hardness

ALSO AVAILABLE IN SILVER. PLEASE STATE CHOICE WHEN ORDERING.


Estimated Volumetric Shipping Weight : 5.00 Kg

 

CREST TECHNOLOGIES EXTENDED STUD KIT
Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This listing is for Black 82mm length (12mm x 1.5 thread pitch) studs with Black nuts, to be used with spacers up to 15mm width.

Please note, unlike most other kits, ours include :
- Full install & Torque guide,
- Allen Key
- Loctite Thread sealant

CA Stud conversion kit. Replaces your wheel bolts with studs and nuts, providing several advantages over the OEM wheel bolts:

- Lighter and stronger fixing method.
- Makes fitting / re fitting wheels MUCH easier and quicker.
- Prevents you from cross threading your wheel hubs, an expensive fix compared to the cost of these stud conversions. If you cross thread these studs on the wheel side, just replace the stud.
- Various size spacers can be used with the same stud kit (size range depending on which length kit chosen), no need to buy different length bolts when you remove / change size of spacers.

Features include:

- OEM Style Black Zinc Finish
- Bullet Nose
- TUV Approved
- 12x1.5 Thread
- Made in Europe
- 10.9 grade hardness

ALSO AVAILABLE IN SILVER. PLEASE STATE CHOICE WHEN ORDERING.

Estimated Volumetric Shipping Weight : 5.00 Kg

 

CREST TECHNOLOGIES EXTENDED STUD KIT
Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This listing is for Black 90mm length (12mm x 1.5 thread pitch) studs with Black nuts, to be used with spacers up to 25mm width.

Please note, unlike most other kits, ours include :
- Full install & Torque guide,
- Allen Key
- Loctite Thread sealant

CA Stud conversion kit. Replaces your wheel bolts with studs and nuts, providing several advantages over the OEM wheel bolts:

- Lighter and stronger fixing method.
- Makes fitting / re fitting wheels MUCH easier and quicker.
- Prevents you from cross threading your wheel hubs, an expensive fix compared to the cost of these stud conversions. If you cross thread these studs on the wheel side, just replace the stud.
- Various size spacers can be used with the same stud kit (size range depending on which length kit chosen), no need to buy different length bolts when you remove / change size of spacers.

Features include:

- OEM Style Black Zinc Finish
- Bullet Nose
- TUV Approved
- 12x1.5 Thread
- Made in Europe
- 10.9 grade hardness

ALSO AVAILABLE IN SILVER. PLEASE STATE CHOICE WHEN ORDERING.

Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

Eibach Pro-Spacers

Wheel Spacers feature:

- Widen your stance—for better handling and appearance
- Made from high-tensile-strength aluminum alloy
- Exact fitment by using minimal production tolerances, resulting in exceptional wheel balance
- All applications tested in rigid durability- and fatigue tests
- High-grade corrosion protection through a special coating process (salt spray test according to DIN 50021)
- Significant weight advantage compared to wheel-spacers made from steel

Eibach Pro-Spacer is the ideal combination for use with the Eibach Pro-Kit as well the Sportline, if the original or aftermarket wheels are missing that last optical "kick".

With the Eibach Pro-Spacer installed, the car looks wider and better, as the wheel fills the arch.?That’s how the car’s look gets its final touch.

By increasing the track width, not only the appearance is improved, but you also achieve an optimized driving behavior combined with higher stability, as the roll of the chassis is influenced in a positive manner.

Optimize the "sportive touch" to the last detail: wheels, tires, Eibach Suspension Components and Pro-Spacer!

The Pro-Spacer is available in different versions from 10mm to 30?mm width.

Now available in ANODIZED BLACK

PLEASE SEE EXCEL PRICELIST BELOW FOR MODELS AVAILABLE AND PRICES

PLEASE CONTACT US FOR BEST POSSIBLE PRICES!



Estimated Volumetric Shipping Weight : 5.00 Kg

 

Click to Enlarge

Black Extended Race Lock nuts (12 x 1.5)

Each kit consists of (5) Lock nuts and (1) Key

- Ball seat adapters are available.
- Ideal for use with MH Titan Nuts
- Manufactured from Forged alloy steel
- Superior strength and durability vs. Aluminum
- Heat treated to 10.9 hardness
- Ultra Durable Alumite coating
- Open ended for full racing stud engagement
- 60 degree conical seat
- Torque to 85-88 ft/lbs
- Will fit all Crest TECH extended stud lengths

Tips for use:
- Re-check torque after first 20-100 miles of service and re-torque as required to 85-88ft/lbs

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Black Extended Race Lock nuts (14 x 1.25)

Each kit consists of (5) Lock nuts and (1) Key.

- Ball seat adapters are available.
- Ideal for use with MH Titan Nuts
- Manufactured from Forged alloy steel
- Superior strength and durability vs. Aluminum
- Heat treated to 10.9 hardness
- Ultra Durable Alumite coating
- Open ended for full racing stud engagement
- 60 degree conical seat
- Torque to 85-88 ft/lbs
- Will fit all Crest TECH extended stud lengths

Tips for use:
- Re-check torque after first 20-100 miles of service and re-torque as required to 85-88ft/lbs

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Click to Enlarge

If you’ve ever seen a sleek, European sedan with that oh-so-low street stance and a bulging wheel/tire combo that fits perfectly in the wheel wells, chances are that car was fitted with H&R TRAK+® Wheel Spacers. TRAK+® Wheel Spacers make your existing tires and wheels appear wider by moving the wheel out from the hub, providing both performance and appearance improvements. Whether you want improved handling, increased safety, or simply desire your car to make a statement about your individual style, TRAK+® Wheel Spacers can help you accomplish your goal and GO WIDE®.

H&R TRAK+® feature a hubcentric design that makes the spacer act as a precise extension of the axle hub which guarantees a perfect wheel fit every time.

PLEASE SEE PRICE LIST LINK BELOW FOR ALL APPLICATIONS AND PRICING.

SEE SEPARATE LISTING IN OUR CHASSIS SECTION FOR EXTENDED WHEEL AND LOCKING BOLTS.

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

McGard ultra high security anti-theft wheel locks are the standard product featuring a freely rotating ring. This ring rotates at every attempt to open the lock, and because it does not present a siutable surface for forcing tools it provides even greater protection.

Our McGards products fulfil the Cat 4 Thatcham criteria (Issue 1, 2 minute burglary test)

McGard wheel bolts are manufactured in two parts. The advantage is that the head exhibits a considerably greater hardness than possible with single-part manufacture. This extreme hardness makes it impossible to open anti-theft wheel locks with standard tools. The head’s nickel/chrome coating assures corrosion resistance and therefore an aesthetic visual appeal over many years.

Please see variations for sizes and fitments

 

Click to Enlarge

The Rogue Engineering wheel pin is a must for any enthusiast! For changing track wheels or snow tires, this makes installation much easier!

In our shop, we remove two (2) lug nuts and insert two wheel pins. After the pins are installed, we remove the remaining lug bolts. The wheel is then slid off the hub on the pin's shaft.

Installation is just as easy. Install two pins, slide on the wheel, secure with one or more lug nuts, and then remove the pins (and install the remaining lug nuts).

Made from 6061 aluminum, they have a "hump" on the shaft to prevent a wheel from sliding off accidentally.

Sold individually. Please specify size required.

Estimated Volumetric Shipping Weight : 2.00 Kg