** UK VAT is NOT charged at checkout on any orders going outside of the UK / EU. **
                           ** For any delivery to an EU country ONLY German VAT will be charged,
                                  NOTHING else to pay when the product arrives in your country **

                                  ** Please contact us for any further information / clarification **






BMW > M3 (E36) > C) CHASSIS, BRAKES, SUSPENSION & STEERING UPGRADES > - Camber /Caster / Toe Adjustment; Control Arms, Linkages, Drop Links Etc. > TURNER MOTORSPORT
TURNER MOTORSPORT REAR ADJUSTABLE DROP LINK
£170.00 inc. VAT

Product Code: tnrajdlk



Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
TURNER MOTORSPORT REAR ADJUSTABLE DROP LINK.

These are the only such Rear Adjustable Drop Links that work on the "rod" type fixing on anti roll bars on the E36 M3 / E46 M3.

These adjustable rear links are only required when using sway bar / swaybars with a suspension with a very low ride height, where it may be necessary to adjust the length of the end links for proper sway bar clearance from the drive axles or other suspension components. These suspensions are usually found only on race cars but this may also apply to street cars with sport springs/sport coil overs that are lowered a lot. On most street cars lowered 1.5" or less, the stock links will be fine.

These end links feature a Heim joint, which allows enough lateral movement when disconnected to adjust the length of the link without removing the entire link from the car. This is particularly helpful when eliminating or adjusting preload while tuning the suspension. Similar links without this joint, can't be adjusted without totally removing the link from the car.

Built-in grease fittings allow for occasional lube, and a packet of grease is included. These links are sold as a set, and include two end links and hardware for H&R and TMS arbs (other brands may not need the hardware).
Note: these links will not work with factory or non-adjustable Eibach arbs, however most Eibach ARBs are adjustable. Please check with us first.

At their shortest setting they are 2.875" hole to hole and on their longest setting they are 3.5" hole to hole.

They will fit the following models...
E36;
318i, 318ic/is, 323i/is, 325i/ic/is, 328i/ic/is, M3 3.0/3.2.

E46;
323Ci/i, 325Ci/i/xi, 328Ci/i, 330Ci/i, M3 3.2.


Estimated Volumetric Shipping Weight : 4.00 Kg
 




© 2024    Site Maintenance by C2G Ltd