Crest Automotive Tuning - A) ENGINE PERFORMANCE (See also forced induction & remapping sections)

Product Code: bmcrpfoem

Click to Enlarge

E60 M5
Click to Enlarge

High flow / high performance air filters that simply replace the factory original versions within the factory airbox.

PERFORMANCE
BMC air filters are designed and produced to ensure a higher air flow than original paper filters. In F1, for example, BMC cotton filters minimize the loss of air flow pressure passing through the air filter; this way ensures the best conditions for full exploitation of maximum power. Therefore the benefits of replacing the original paper filter with BMC cotton air filter, produced using the same technology and materials as the F1 air filters, are evident.

DESIGN AND MATERIALS
Qualified engineers using advanced software and expert technicians using the latest technologies produce BMC air filters. An F1 filter must be very light, must be made of the best raw materials and must improve performance. For this reason we use only alloy mesh with epoxy coating to ensure protection from petrol fumes and from oxidization due to the humidity of the air. The filtering material is composed of a special cotton gauze soaked with low-viscosity oil to give you the best air permeability.

ADVANCED TECHNOLOGY
BMC technical staff has developed a particular production system based on soft rubber moulding which produces the familiar BMC red filters. They are made in one single piece with no welded joints in the corners, thus avoiding breaking risks. This system, called "Full Moulding" comes from R&D in F1 and it is significant of BMC air filters' technical and quality specifics.

PLEASE REFER TO EXCELL PRICE AND APPLICATION LIST BY CLICKING THE LINK BELOW.

BMC DIRECT REPLACEMENT PANEL FILTERS PRICE LIST

Product Code: cln55intmnf

Click to Enlarge

PLEASE NOTE, Regarding the injectors, you can install 2 types of different length of injector, 14mm variety.
Click to Enlarge

Injectors
Click to Enlarge

Click to Enlarge

High Performance Intake Manifold, fuel rail and throttle Body kit for the N55 engine, VERSION 1, Direct Port Injection design.
(Please also see alternate design Version 2 also listed in this section, equal performance but different aesthetics etc. )

- Very high quality engineering & construction
- Available in Silver and Black.
- 80/90mm size throttle body to your choice (Please specify when ordering)
- Fuel rails included
- "Plug and Play" installation to the factory engine layout
- Uses OEM specification / size injectors
- O-ring seals replace the OEM metal gaskets for a better seal .

NOTES Regarding Injectors and rails :

- There are TWO options regarding injectors for this conversion as follows :
1) Choose the complete intake Kit which includes injectors ports in the plenum, together with the dedicated fuel rail to install longer aftermarket performance injectors.
2) Choose the Intake manifold option Without injector ports on the plenum, to replace the OEM manifold only but retain OEM fuel rail.

- Clumate fuel rails are not universal ones, and they ONLY fit Clumate's intakes, they wont fit even the OEM intakes. Other brands fuel rails will not fit Clumate's intakes either.

Video of N55 Intake manifold installed :

Product Code: cln55itkmnf80

Click to Enlarge

PLEASE NOTE, Regarding the injectors, you can install 2 types of different length of injector, 14mm variety.
Click to Enlarge

Injectors
Click to Enlarge

Click to Enlarge

High Performance Intake Manifold, fuel rail and throttle Body kit for the N55 engine, VERSION 2. PORT INJECTION DESIGN
(Please also see alternate design Version 1 also listed in this section, equal performance but more similar design to OEM.)

- Very high quality engineering & construction
- Improves performance
- Available in Silver and Black.
- Fuel rails included
- "Plug and Play" installation to the factory engine layout
- Uses OEM specification / size injectors
- O-ring seals replace the OEM metal gaskets for a better seal .

NOTES Regarding Injectors and rails :

- There are TWO options regarding injectors for this conversion as follows :
1) Choose the complete intake Kit which includes injectors ports in the plenum, together with the dedicated fuel rail to install longer aftermarket performance injectors.
2) Choose the Intake manifold option Without injector ports on the plenum, to replace the OEM manifold only but retain OEM fuel rail.

- Clumate fuel rails are not universal ones, and they ONLY fit Clumate's intakes, they wont fit even the OEM intakes. Other brands fuel rails will not fit Clumate's intakes either.

Video of N55 Intake manifold installed :

Product Code: evef8xmv2cfint-cp

Click to Enlarge

The Eventuri F87 M2 (S55 Engine version) Competion model Intake system
SEE alternate listing for N55 engine F87 M2 model.

Crafted from prepreg carbon fibre to the highest of levels, the F8x Eventuri intake genuinely improves performance through an effective cold air feed system and more importantly through our patent pending housing
design.

Performance Gain: 12-20hp, 12-16ft-lb

The F87 M2 Competition intake system is designed to to allow the turbos to work more efficiently. By replacing the stock airbox system with our Patented Venturi filter housings and smoothly curved tubes, the airflow to the turbos is more laminar thus they can spool with less drag. Since the M2 Competition does not have air openings behind the grills, we also added sealed ducts to ensure that the intake temperatures stay as low as possible. The combination of our Venturi housings, organically shaped tubes and sealed ducts result in an optimised intake which sets a benchmark for this platform.

The Eventuri Difference

The M2 Competition Eventuri system uses our Patented Carbon Fibre Housings with our Gen 2 bespoke filters, which provide an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield but a unique design which invokes the Venturi effect and maintains laminar flow conditions to reduce the drag on the turbo.

Please see dyno graph showing the comparison between the Eventuri and the stock airbox on a M2 Competition. The car had no other modifications. As you can see, power and torque are increased through a large portion of the rpm range. This translates on the road to increased part throttle and full throttle response with the car pulling much more eagerly to the redline. The testing was done on the same day back-to-back and temperatures were monitored to ensure consistency. The hood was closed for all runs.
Each system consists of:

-2x Carbon Fiber Venturi housings
-2x High Flow Gen 2 Filters
-2x Aluminium Cowls for smooth airflow entry
-Left Side Carbon Tube with integrated MAF sensor mount
-Right Side Carbon Tube with integrated MAF sensor mount
-High quality Silicon couplers with BMW specification hose clamps

Unlike most aftermarket systems which are basically cone filters on the end of tubes, the Eventuri housings literally flips things on its head by inverting the cone filter and providing a smooth transition from intake mouth to the smaller intake tube - thus reducing overall drag and providing greater flow efficiency. This design has now been proven on multiple platforms and consistently produces genuine performance gains over conventional "cone on a tube" intakes which are so commonly used today.

Performance Results
Extensive dyno testing has been carried out on the M2 during development and we can now say with confidence that our final design produces more genuine and consistent power gains than any other system on the market so far. On the Dyno, the M2 can give varying results depending on heat soak - this variation is used by many companies to claim performance gains when in fact the engine is showing a difference in power regardless of the "upgrade". This is why we ran the car several times in both stock and Eventuri configurations and allowed the engine to produce the best possible in both.

WE WILL BEAT ANY OTHER GENUINE QUOTE

Estimated Volumetric Shipping Weight : 5.00 Kg

Product Code: even55cfv2

Click to Enlarge

The Eventuri F8X M2, M235i, M135i / F30 335i, 435i N55 ENGINE, Intake system
** SEE alternate listing for S55 Engine version M2 competition model

Crafted from prepreg carbon fibre to the highest of levels, the F8x Eventuri intake genuinely improves performance through an effective cold air feed system and more importantly through our patent pending housing design.

The Eventuri F87 M2, N55 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Here are the details for each component and the design ethos behind them:

Each system consists of:
- Prepreg Carbon Fibre Venturi Housing
- High Flow Generation 2 Bespoke Cone Filter
- Prepreg Carbon Sealing Duct
- Prepreg Carbon Fibre Intake Tube with integrated MAF Sensor Mount
- Prepreg carbon Fibre Air Scoop
- Laser Cut Intake heat Shield
- Laser Cut Stainless Steel Brackets
- High quality Silicon couplers with BMW specification hose clamps

Unlike most aftermarket systems which are basically cone filters on the end of tubes, the Eventuri housings literally flips things on its head by inverting the cone filter and providing a smooth transition from intake mouth to the smaller intake tube - thus reducing overall drag and providing greater flow efficiency. This design has now been proven on multiple platforms and consistently produces genuine performance gains over conventional "cone on a tube" intakes which are so commonly used today.

The filter housing comprises of a high flow filter, aluminium cowl, laser cut bracket and the carbon pod itself. The carbon pod shrouds the reverse mounted filter and smoothly shapes the airflow down to the intake tube. This smooth reduction in cross sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack - below is a diagram to show the comparison between our patent pending design and a regular intake system.

The filter housing is positioned with its opening sealed against this new carbon duct. This carbon duct has been designed to fit over the stock cold air duct and direct ambient air from the scoop into the filter. It seals against the engine bay heat whilst still allowing some air entry from the cold side of the engine bay where the hood meets the wing. In addition, there is a heat shield attached to the side which blocks the hot air from the radiator and the alternator from directly impacting onto the carbon housing. This shield reduces direct heat soak onto the carbon housing and therefore contributes in keeping IAT down.

The intake tube is crafted from 100% prepreg carbon fibre. Each tube has an integrated MAF sensor mount and breather adaptor which are CNC machined from aluminium. The inlet tube has been designed to provide a smooth path for the airflow to negotiate from the filter to the stock turbo tube. In order to clear the fan shroud we smoothly transitioned the cross section from a circle to an oval and maintained constant area. This ensures the airflow remains laminar and allows the turbo to function with minimal drag.

The scoop was designed for maximum efficiency in directing the incoming air to the stock duct openings. Many aftermarket scoops have a large flat area almost perpendicular to the oncoming air - not great for channelling it into the ducts as the airflow just "hits" this flat portion and creates turbulence.

The Eventuri Scoops have been designed to sit directly behind the front grills to capture as much air as possible and with a continuous curve to the duct opening to ensure this airflow is efficiently channelled. Having an effective cold air feed to the filters is an essential part of the design. Simply having some heat shields in place is not an effective means of avoiding heated air from entering the filters unless the shields create an air tight envelope around the filters. The scoops and ducts in our system combine to provide the filter openings with ambient air and maintain low intake air temperature. The following video explains the design features.

Performance Results
Extensive dyno testing has been carried out on the M2 during development and we can now say with confidence that our final design produces more genuine and consistent power gains than any other system on the market so far. On the Dyno, the M2 can give varying results depending on heat soak - this variation is used by many companies to claim performance gains when in fact the engine is showing a difference in power regardless of the "upgrade". This is why we ran the car several times in both stock and Eventuri configurations and allowed the engine to produce the best possible in both.

Available options, please contact us for prices...
Eventuri VAi Carbon Intake Kit (Full Carbon)
Eventuri VAi Carbon Intake Kit (Full Kevlar)

WE WILL BEAT ANY OTHER GENUINE QUOTE

Estimated Volumetric Shipping Weight : 5.00 Kg

Product Code: even55cf

Click to Enlarge

The Eventuri F8X M2, M235i, M135i Intake system, N55 engine

Crafted from prepreg carbon fibre to the highest of levels, the F8x Eventuri intake genuinely improves performance through an effective cold air feed system and more importantly through our patent pending housing
design.

Each system consists of:
2 x CF Venturi housings with high flow filters
2 x Aluminium cowls for smooth airflow entry
2 x CF Tubes with integrated MAF sensor mounts
2 x CF Ducts
2 x CF Front scoops
2 x Laser cut stainless steel brackets
2 x V-Band Clamps
2 x Silicon couplers
6 x OEM Spec Hose Clamps

Unlike most aftermarket systems which are basically cone filters on the end of tubes, the Eventuri housings literally flips things on its head by inverting the cone filter and providing a smooth transition from intake mouth to the smaller intake tube - thus reducing overall drag and providing greater flow efficiency. This design has now been proven on multiple platforms and consistently produces genuine performance gains over conventional "cone on a tube" intakes which are so commonly used today.

Performance Results
Extensive dyno testing has been carried out on the M2 during development and we can now say with confidence that our final design produces more genuine and consistent power gains than any other system on the market so far. On the Dyno, the M2 can give varying results depending on heat soak - this variation is used by many companies to claim performance gains when in fact the engine is showing a difference in power regardless of the "upgrade". This is why we ran the car several times in both stock and Eventuri configurations and allowed the engine to produce the best possible in both.

Available options, please contact us for prices...
Eventuri VAi Carbon Intake Kit (Full Carbon)
Eventuri VAi Carbon Intake Kit (Full Kevlar)

WE WILL BEAT ANY OTHER GENUINE QUOTE

Estimated Volumetric Shipping Weight : 5.00 Kg

Product Code: evenn55crbkvlairscp

Click to Enlarge

Benefits
With the innovative design of the Eventuri Air Scoop your BMW will be anything but basic.
An easy way to increase airflow to your engine and further increase power output from your intake system.

Features
- 100% Prepreg carbon fibre
- Direct bolt-on
- Improve air flow

Application
- 2016+ BMW M2 [F87]
- 2014+ BMW M235i [F22]

100% Prepreg carbon fibre - the air scoop forces ambient air directly into the filter opening. This air scoop mounts behind the front kidney grilles and effectively saturates the mouth of the intake with cold air. These air scoops provide you with an easy way to increase airflow to your engine and further increase power output from your intake system.

WE WILL BEAT ANY OTHER GENUINE QUOTE

Estimated Volumetric Shipping Weight : 6.00 Kg

Product Code: evenn55pnlflt

Click to Enlarge

Direct replacement for your original equipment panel filter
Polyurethane filter which won't deform from heat
Dry filter to protect MAF from being covered in oil

FITS MODELS: BMW 1 Series, BMW 1 Series F2X, BMW 2 Series, BMW 2 Series F2X, BMW 3 Series, BMW 3 Series F3X, BMW 4 Series, BMW 4 Series F3X, BMW M2, BMW M2 F87

Estimated Volumetric Shipping Weight : 2.00 Kg

Product Code: sg71323

Click to Enlarge

FTP N55 air intake pipe

The FTP intake pipe replaces the original plastic air intake pipe, it reduces the restriction of air flow into the turbo.
The turbo intake pipe will improve turbo response, increase air flow and less turbo lag.
The viton o-ring is a stronger material than the original.

Features
- Increased Flow
- Direct OEM Replacement
- Caliber increase
- 3-Ply Silicon Couplers

Suitable for...
M135i
- 1' F20 (04/2011 — 02/2015)
- 1' F20 LCI (06/2014 — 06/2016)
- 1' F21 (12/2011 — 02/2015)
- 1' F21 LCI (06/2014 — 06/2016)

M235i , M2
- 2' F22 (10/2012 — 06/2016)
- 2' F87 M2 (11/2014 — 06/2017)
- 2' F87 M2 LCI (09/2016 — 02/2018)
- 2' F23 (03/2014 — 06/2016)

335i
- 3' F30 (04/2011 — 07/2015)
- 3' F31 (08/2011 — 06/2015)
- 3' F34 GT (07/2012 — 06/2016)
- 3' F35 (06/2011 — 04/2015)
- 3' F35 LCI (01/2015 — 01/2016)

435i
- 4' F32 (11/2012 — 06/2016)
- 4' F33 (03/2013 — 06/2016)
- 4' F36 Gran Coupé (07/2013 — 06/2016)

M235i Racing coupe
- MSBMW Motorsport M235iRacing, Coupe, N55

Estimated Volumetric Shipping Weight : 3.00 Kg

Product Code: grpm

Unfortunately we can no longer sell or recommend Gruppe M due to recent negative experiences, including:
- Extremely poor service.
- Stealing customers by making direct sales to them behind our back.
- Dishonesty.
- Shipping intake kits with missing parts and refusing to correct their oversight.

Estimated Volumetric Shipping Weight : 1.00 Kg

Product Code: manhart-2

MANHART MH2 GTR
Click to Enlarge

MANHART MH5 800
Click to Enlarge

MANHART MH3 600
Click to Enlarge

MANHART MH2 Performance Kit
Click to Enlarge

MANHART MH8 800
Click to Enlarge

This page is still under construction. For more information, including product details, pricing and availability, please call or email us now.
Please note, prices may change subject to exchange rates and availability.

We now offer the full range of MANHART BMW performance parts, as an official MANHART distributor.
MANHART began perfecting and optimising BMWs more than three decades ago, offering unparalleled experience and expertise in the field. MANHART’s primary focus has always been the optimisation of BMW M cars, and this shines through in the products they create.
Many of MANHART’s most famous projects are technology swaps – a V8 E30, or an S85 in an E92 M3 – but they also offer a wide range of excellent upgrades, including carbon parts for exterior and interior uses; intake and exhaust systems; an extensive range of performance kits, and their specially designed MHTRONIK engine upgrade box.
As an official distributor for MANHART, we can provide the full range of MANHART BMW performance products, to suit whatever upgrades you are interested in. Contact us now for more information on pricing and specifics.
If you get a cheaper offer elsewhere, come back to us; we will always try to beat any other genuine quote!

Estimated Volumetric Shipping Weight : 1.00 Kg