** UK VAT is NOT charged at checkout on any orders going outside of the UK / EU. **
                           ** For any delivery to an EU country ONLY German VAT will be charged,
                                  NOTHING else to pay when the product arrives in your country **

                                  ** Please contact us for any further information / clarification **






BMW > M3 (F80M) > I) SEATS, ACCESSORIES, MOUNTS ETC > - Accessories, Mounts, Harnesses etc > All Manufacturers

Product Code: vcbelt4d



Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
BMW Race Seat Installation Kits are by far the easiest and best way to mount race seats into your BMW... but if your looking to retain an OE three-point seat belt in a position that works for you, what do you do?

Our OE Factory Seat Belt to Floor Mount Kit includes the needed components to utilized factory belts after the original buckle/seat has been replaced using one of our Floor Mount Adapter sets or Race Seat Installation kits.
These can be bolted above or sandwich between FMAs for various driver preferences.
Includes:

•New OEM BMW seat belt buckle receptacle
•3-point mounting bracket (powder coated black)
•Needed hardware

PLEASE NOTE:
- This kit is for 4 DOOR & Z CAR models ONLY, for 2 door models please see alternate listing in same website section.
- Priced per EACH seat kit, if you have a pair of race seats you need to order TWO of these kits.
- The floor mount plates in the photos are NOT included in this kit, please see separate listing for these
- Please specify exact vehicle model when ordering

** YOU CAN ALSO buy the brackets shown here separately, to mount a race harness to such race floor mounts instead of factory seat belt system, or indeed to fit BOTH a race harness and factory belts simultaneously. Please enquire fro pricing for these options.



Estimated Volumetric Shipping Weight : 10.00 Kg
 

Product Code: 7920150



Click to Enlarge
Description
6-Point Harness Steel Submarine Bracket

Allows a secure anchor location for your 6-point harness submarine belts. For use with Macht Schnell Liteweight Floor Mounts.

Made from extremely strong and durable steel.

Features:
- Compatible with 5-point and 6-point harnesses
- Includes hardware
- Bolt-in installation

Models Supported:
2008+ E82 1-Series & 1M
1999-2006 E46 3-Series & M3
2006+ E9X 3-Series & M3
2003-2008 E85/6 Z4 & Z4M


Estimated Volumetric Shipping Weight : 10.00 Kg
 

Product Code: 7910101-7910100-7010111



Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge
Description

Race seats can offer a an immediate improvement in driver feedback keeping you planted to the seat and concentrated on driving, while offering a significant weight savings. However, most race seat companies leave it up to the driver for a mounting solution.

Macht Schnell Floor Mounts are designed for the serous track enthusiast in mind. CAD designed and machined from 6061-T6 aerospace aluminum, these mounts are as strong as they are light. Multiple mounting positions allow driver to dial in an exact seat position that is most comfortable and perfectly centered to the steering wheel.

As used by Track Car Performance Magazine (UK), among many others, see blog report here : http://z4mtimeattack.blogspot.co.uk/

Competition Liteweight Floor Mount Features:

- CAD designed and CNC machined from 6061-T6 aerospace aluminum
- Allows fitment for Recaro and most other race seats on the market
- Fully compatible with slider brackets
- Low profile allows for sliders or taller drivers allowing helmet clearance
- Black anodized finish for additional strength and corrosion/wear resistance
- Side provisions allows brackets (sold separately) for OEM seatbelt receptacle mounting or race harnesses
- Available in Black Anodized or Raw Aluminum finish
- Can be used on Driver or Passenger's side

- Sold as a set (one seat)

Fits all models listed below:

- 1992-1999 E36 3-Series & M3 (no convertible models) (79.10.101)
- 1999-2006 E46 3-Series & M3 (no convertible models) (79.10.101)
- 2003-2008 E85/6 Z4 & Z4M (79.10.101)
- 2007> E9X / X8X (79.10.100)
- 2012> F30/F31 3 series (70.10.111)
- 2014> F22/F23 2 series (70.10.111)
- 2014> F32/F33 4 series (70.10.111)
- 2015> F8X M3/M4 (70.10.111)


*(Please specify which colour and which model you require at time of ordering)*




Estimated Volumetric Shipping Weight : 15.00 Kg
 

Product Code: vclbrkt



Click to Enlarge
Description
This simple bracket set lets you enable an easy install of a snap-in, or eyelet bolt type harness. This kit allows the fastest installation of race harness lap belts directly to VAC / MACHT SCHNELL ETC Floor Mount Adapters. With this bracket set, our Anti-Sub Mounting Bracket, you can now install your racing harness of choice into your BMW without drilling ANY holes. These brackets simply install between the floor mounts and your floor pan so no extra installation time is needed and they totally eliminate drilling into the chassis as was previously the only option. They can be installed on driver or passenger side.

Includes:
(L & R set) CNC bent and cut Heavy-duty brackets, power coated black for durability.

NOTE: We also offer OEM seatbelt receptacle adapters to work with this, please see separate listing in this section.

Estimated Volumetric Shipping Weight : 1.50 Kg
 

Product Code: re.fm.f8x.m



Click to Enlarge
Description
Rogue Eng seat mount frame F8x M cars

The lowest profile mount made! Finally, tall guys can fit into small cars!

While working on customer track cars for years, we often had to fabricate our own floor mounts to get the fixed back seats low enough in the vehicle. This is especially true for vehicles with full roll cages, as most often times a driver's helmet will make contact with the overhead bars of the cage.

Fabricating a custom floor mount that was low enough meant a few hours of measuring, cutting material, welding, grinding, fitting per side. This fabrication process would take over 2 hours for each mount. We have decided to make it easier (and cheaper) to get the lowest floor mount produced.

Here is a sample of the cost savings from a typical shop:
- 24" x 2" CRS strips, 3/16" thickness & 3 hours of fabrication (welding, cutting, drilling, finishing, refitting), for a custom made seat mount to get to the point of a steel mount ready to put a seat assembly (sliders, side mounts, seat) for fitting, can be an expensive fix.

However...
Made from 3/16" cold rolled steel, this one-piece, CNC plasma cut floor mount is designed to bolt directly to the existing factory floor. The corners of the mount have radii on all corners to prevent stress risers and increase strength.

It is designed to fit on the left or right (by flipping it over). Once the seat assembly has been determined, marks can be made on the mount, and then can drilled accordingly. Other holes can be drilled to mount other items such as the 3-point belt anchor or harness lap belts (using the ROGUE ENGINEERING LAP BELT BRACKET, sold separately). The floor mount is bare steel finish, so painting or powder coating is recommended after all the final fitting has been done.

These mounts are sold each, to mount one seat.

Estimated Volumetric Shipping Weight : 6.00 Kg
 

 

Return to Top



© 2024    Site Maintenance by C2G Ltd