** UK VAT is NOT charged at checkout on any orders going outside of the UK / EU. **
                           ** For any delivery to an EU country ONLY German VAT will be charged,
                                  NOTHING else to pay when the product arrives in your country **

                                  ** Please contact us for any further information / clarification **






BMW > 3 Series (E36) > C) CHASSIS, BRAKES, SUSPENSION & STEERING UPGRADES > - Brake Cooling > All Manufacturers

Product Code: bcbpbmpd5_15



Click to Enlarge

Click to Enlarge
Description
Brake cooling ducts are a common practice in motorsport. Severe braking conditions create a tremendous amount of heat at the brake pad, rotors, calipers, and wheel bearing hubs. Under normal driving conditions this heat dissipates during the non braking cool down period.

On the track or hard road use the braking is much more severe and the cool down times are much shorter. As the braking temperature increases, brake component service life is decreased dramatically. A standard set of brake pads and rotors can wear out completely during one weekend of track driving. This is due to the material failure of both the pads and rotors at extreme temperatures. Forcing air directly at the core of the brake rotor, which then passes through the rotor vents, will increase the life of the brake components. The cooling ducts direct the air to the center of the bearing hub and brake rotor. The air is then expelled through the ventilation slots in the center of the rotors.

The backing plates in this kit mount behind the brake discs and are connescted via ducting to air ducts mounted at the front of the car, thereby "force feeding" air to the center of the discs to vastly improve heat dissipation and thus help prevent brake fade.

Kit includes:
- 2x Backing Plates
- 2x Brake Air Inlet Ducts
- Ducting Hose
- Mounting Hardware

SEE ALSO :

Carbon Fibre brake cooling backplate kit only.

Carbon brake ducts only .

Plastic brake ducts only .

Alloy brake cooling back plates only .

E30 BRAKE COOLING CHANNEL

Estimated Volumetric Shipping Weight : 6.00 Kg
 

Product Code: bcbpbmpd52_15



Click to Enlarge
Description
Brake cooling ducts are a common practice in motorsport. Severe braking conditions create a tremendous amount of heat at the brake pad, rotors, calipers, and wheel bearing hubs. Under normal driving conditions this heat dissipates during the non braking cool down period.

On the track or hard road use the braking is much more severe and the cool down times are much shorter. As the braking temperature increases, brake component service life is decreased dramatically. A standard set of brake pads and rotors can wear out completely during one weekend of track driving. This is due to the material failure of both the pads and rotors at extreme temperatures. Forcing air directly at the core of the brake rotor, which then passes through the rotor vents, will increase the life of the brake components. The cooling ducts direct the air to the center of the bearing hub and brake rotor. The air is then expelled through the ventilation slots in the center of the rotors.

These backing plates mount behind the brake discs and are connescted via ducting to air ducts mounted at the front of the car ( ducts not included in this item, please see other listing for complete kit) , thereby "force feeding" air to the center of the discs to vastly improve heat dissipation and thus help prevent brake fade.

Kit includes:
- 2x Backing Plates
- 3 Metres Ducting Hose
- Mounting Hardware

SEE ALSO :

Carbon Fibre brake cooling backplate kit only.

E30 & E36 CARBON FIBRE BRAKE COOLING DUCTS.

Plastic brake ducts only .

Alloy brake cooling back plates & duct kit .

E30 BRAKE COOLING CHANNEL



Estimated Volumetric Shipping Weight : 6.00 Kg
 

Product Code: jt36bkecool



Click to Enlarge
Description
This kit includes the 3 piece aluminum protective under panel which is also available seperately Here.

Kit includes:
-High temperature aircraft flex hose, routed to the inner fender wall from duct inlets.
-Left and Right tig welded black anodized aluminum inlet ducts, mounted just inside the spoiler lower center grill.
- CNC machined and tig welded black anodized aluminum flanges mounted at the inner fender wall.
-Stainless steel hardware is used on fastners and clamps.

This system doubles the the air flow to the front rotors and increases the cooling rate by 20%. An essential upgrade to reduce brake fade during heavy braking.

Note: Hose shown in orange for photo purposes only. Actual hose and all fabricated/machined parts are black to become virtually unnoticed once installed.

Estimated Volumetric Shipping Weight : 5.00 Kg
 

Product Code: 36cfbdct-2



Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
E30 & E36 M3 Carbon Fibre Brake Inlet Ducts

- These brake ducts replace the original factory fog light assembly in the front bumper.
- They are constructed of impact resistant, paintable "raw" Carbon Fibre.
- For a carbon fibre finish they require prep and laquering
- These must be glued in place (the originals are clipped).


SEE ALSO :
E30 & E36 PLASTIC BRAKE COOLING DUCTS

ALLOY BRAKE COOLING BACKING PLATES

CARBON FIBRE BRAKE COOLING BACK PLATE KIT

Alloy brake cooling back plates & duct kit .





Estimated Volumetric Shipping Weight : 4.00 Kg
 

Product Code: 36bckbmpd4



Click to Enlarge
Description
M3 Brake Inlet Ducts

These brake ducts replace the original factory fog light assembly. They are constructed of impact resistant, paintable A.B.S. plastic.

Kit includes :

- left and right brake ducts
- mounting hardware.

SEE ALSO :

Carbon Fibre brake cooling backplate kit only.

E30 & E36 CARBON FIBRE BRAKE COOLING DUCTS.

Alloy brake cooling back plates & duct kit .

Alloy brake cooling back plates only .

E30 BRAKE COOLING CHANNEL


Estimated Volumetric Shipping Weight : 2.00 Kg
 

Product Code: hmse36e36cool



Click to Enlarge

Click to Enlarge

Click to Enlarge

322mm OPTION, IN RED


Click to Enlarge
Description

The Hard Motorsport Brake Cooling Duct Race Kit is THE ONLY complete package that you need for mounting the plumbing for brake ducts to your BMW E36 M3. Our kit incorporates a powder coated aluminum tube between the inlet and the flex tube where the contact point of the tire. This prevents you from instantly wearing do not wear a hole in your very expensive to replace flex tube.

Designed for racing, our kit uses a powdercoated metal bracket that mounts to the frame of your BMW M3 which allows removal of your front bumper while leaving the entire kit in place for fast track repairs and tuning. No need to fumble with bolts, screws and duct clamps, or unintentionally ripping our your flex tubing in the process. Cool air is delivered directly to your brakes from our steel fabricated backing plate instead of blasting the front of your tire instead of the brake components. Our complete kit resolves this factory design flaw.

There are 3 backing plate options to suit your specific brake requirements, PLEASE SPECIFY WHICH YOU REQUIRE WHEN ORDERING :

-OEM Sized rotors - powdercoated BLACK
-332mm Sized rotors - powdercoated RED
-355mm Sized rotors - powdercoated SILVER


Our quality ABS molded duct inlets are designed to endure the rigor of racing while saving you hundreds of dollars on your build budget! They're even lighter than expensive carbon fiber and resin alternatives that crack and yellow over time.

We also list the cooling backing plates on their own separately, please see alternate listing in this same website section.

PLEASE NOTE: THE WEIGHT LISTED BELOW REFERS TO VOLUMETRIC SHIPPING WEIGHT AND NOT ACTUAL PRODUCT WEIGHT

Estimated Volumetric Shipping Weight : 15.00 Kg
 

Product Code: hmse36coolplate



322mm OPTION, IN RED


Click to Enlarge

355mm VERSION, IN SILVER
Click to Enlarge
Description
Brake cooling backing plates, available in 332 m and 355mm brake disc diameter options, suitable for Brembo, Stoptech etc BBKs.
Other Backing Plates are very small and only fit insides a factory rotor hat, which is about an inch smaller than the hat size of a 332mm and more on the 355mm, so air just blows out the sides instead of going through the vents of the rotor which it is made to do.

Also there is no heat shield to protect from heating up your oil in your shocks which will thin the oil and
change the dampening forces.
So the Hard Motorsport BBK Brake Duct Kit Bmw E36 M3 is design to fit inside the hat of a 332mm bbk and also has
a heat shield that protects ball joints.

PLEASE SPECIFY IF YOU REQUIRE THE 322mm (in red) OR 355mm (in silver) VERSIONS.
(OEM diameter version also available, please enquire. )

** We also list the complete brake cooling kit with hoses, ducts, mounting hardware etc elsewhere in this website section.

PLEASE NOTE: THE WEIGHT LISTED BELOW REFERS TO VOLUMETRIC SHIPPING WEIGHT AND NOT ACTUAL PRODUCT WEIGHT

Estimated Volumetric Shipping Weight : 12.00 Kg
 

Product Code: hms36scops



Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
these Inlets are the perfect size to fit you E36 M3 front bumper. Made of Abs plastic you will never have issues of these cracking out unlike Fiber Glass and Carbon Fiber. Extremely light weight! Connects to 3 inch (75mm) hose.

Come as a Pair.
Made In the USA!

PLEASE NOTE: THE WEIGHT LISTED BELOW REFERS TO VOLUMETRIC SHIPPING WEIGHT AND NOT ACTUAL PRODUCT WEIGHT

Estimated Volumetric Shipping Weight : 8.00 Kg
 

 

Return to Top



© 2024    Site Maintenance by C2G Ltd