** UK VAT is NOT charged at checkout on any orders going outside of the UK / EU. **
                           ** For any delivery to an EU country ONLY German VAT will be charged,
                                  NOTHING else to pay when the product arrives in your country **

                                  ** Please contact us for any further information / clarification **






BMW > 3 Series (E36) > B) FORCED INDUCTION (Turbo & supercharging) > - Charge / Boost pipes, Blow Off Valves Etc. > All Manufacturers

Product Code: hopmap-2



Click to Enlarge

Click to Enlarge
Description
Under forced induction use, the original MAF from BMW cannot read high enough air flow values for reliable use at high load. The MAP conversion is a simple, cheap and reliable alternative which takes less than 10 minutes to convert to.

Unlike with earlier versions of this kit, you now have no need to open the ECU and solder and de-solder certain pins - everything is “plug and play” and can easily be returned to standard at a later date if required.

Please note: This conversion can currently only be used with the Siemens MS43 ECU (standard for most M54 engines).
You will need to tune the engine ECU after fitting this kit.
If you choose not to use the MAP sensor mount, note that the sensor needs to receive pressure reference from the manifold itself - it cannot be mounted downstream from the throttle body.

What’s included:

-MAF to MAP conversion loom (plug in and forget - no soldering required)
-Genuine Bosch MAP sensor
-DISA blanking plate with MAP sensor mount (fits all M54B30 intake manifolds - check the diameter of the DISA hole if you’re using an M54B28, B25 or B22 manifold before ordering)
-Step-by-step instructions for completing the conversion (you will have to move some pins inside the ECU box, but do not have to open the ECU housing itself.)
-Works for both forced induction and normally aspirated builds



Estimated Volumetric Shipping Weight : 0.50 Kg
 

Product Code: 900-02-201



Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
Blow Off Valve 50 mm V-Band
(Please also see alternate listing for Nuke Blow Off Valve FOR 50 mm Hose Connection)

50 mm piston valve with the highest flow capacity available. When it is necessary to be able to rely on the installation and function.

Designed with a oversized 50 mm valve; we believe this is the largest valve available with the highest flow capacity. The body and all internal components are CNC-machined from 6082 aluminum alloy, anodized for a long lasting, corrosion-free appearance.

Designed and manufactured to handle extreme amounts of power with the same hallmark as all of our performance products.

The Blow off Valve comes with one quick connect pneufit fitting, with oversized 1/4 connection for quick and actuator response. If needed, barb fittings are available.

Spring Pressure Chart:
0,50 - 0,75 bar / 7,25 - 10,9 psi : Additional BLACK SPRING
0,35 - 0,50 bar / 5,07 - 7,25 psi : Stock / included BLUE SPRING
0,00 - 0,35 bar / 0,00 - 5,07 psi : Additional WHITE SPRING

** Measure engine vacuum at idle and with engine at operating temperature.

Available both with V-Band or silicon hose attachment. Nuke Performance unique V-Band design to enable perfect fitment.
The V-Band version is complete with clamp and welding flange.

Technical information :
• CNC manufactured from aluminium alloy 6082.
• The valve seal utilizes a Viton O-ring that is glued in place to prevent the possibility of sticking to the seat and pulling out.
• Also available with V-Band Connection.
• Delivered with 1x 1/4 G quick connect pneufit fitting for 6mm tubing.
• Delivered with "blue spring" : 0,35 - 0,50 bar / 5,07 - 7,25 psi.
• Springs are available in three different setups : White, Blue , Black.
• Laserengraved.

Measurements :
Height : 98 mm
Diameter : 88 mm
Weight : 399 g

Estimated Volumetric Shipping Weight : 2.00 Kg
 

Product Code: 900-01-202



Click to Enlarge

Click to Enlarge
Description
Blow Off Valve 50 mm for hose connection
(Please also see alternate listing for Nuke Blow Off Valve for V band connection)

50 mm piston valve with the highest flow capacity available. When it is necessary to be able to rely on the installation and function.

Designed with a oversized 50 mm valve; we believe this is the largest valve available with the highest flow capacity. The body and all internal components are CNC-machined from 6082 aluminum alloy, anodized for a long lasting, corrosion-free appearance.

Designed and manufactured to handle extreme amounts of power with the same hallmark as all of our performance products.

The Blow off Valve comes with one quick connect pneufit fitting, with oversized 1/4 connection for quick and actuator response. If needed, barb fittings are available.

Spring Pressure Chart:
0,50 - 0,75 bar / 7,25 - 10,9 psi : Additional BLACK SPRING
0,35 - 0,50 bar / 5,07 - 7,25 psi : Stock / included BLUE SPRING
0,00 - 0,35 bar / 0,00 - 5,07 psi : Additional WHITE SPRING

** Measure engine vacuum at idle and with engine at operating temperature.

Available both with V-Band or silicon hose attachment. Nuke Performance unique V-Band design to enable perfect fitment.
The V-Band version is complete with clamp and welding flange.

Technical information :
• CNC manufactured from aluminium alloy 6082.
• The valve seal utilizes a Viton O-ring that is glued in place to prevent the possibility of sticking to the seat and pulling out.
• Also available with V-Band Connection.
• Delivered with 1x 1/4 G quick connect pneufit fitting for 6mm tubing.
• Delivered with "blue spring" : 0,35 - 0,50 bar / 5,07 - 7,25 psi.
• Springs are available in three different setups : White, Blue , Black.
• Laser engraved.

Measurements :
Height : 98 mm
Diameter : 88 mm
Weight : 399 g

Estimated Volumetric Shipping Weight : 2.00 Kg
 

 

Return to Top



© 2024    Site Maintenance by C2G Ltd