** UK VAT is NOT charged at checkout on any orders going outside of the UK / EU. **
                           ** For any delivery to an EU country ONLY German VAT will be charged,
                                  NOTHING else to pay when the product arrives in your country **

                                  ** Please contact us for any further information / clarification **






BMW > 5 Series (E28) > B) FORCED INDUCTION (Turbo & supercharging) > - Water Injection and Accessories > SNOW PERFORMANCE
 


Product Code: snow




Boost Cooler Stage 3 NA EFI DST
Click to Enlarge

Boost Cooler Stage 1 - Starter Kit
Click to Enlarge

Boost Cooler Stage 2 Water Injection
Click to Enlarge

Boost Cooler Stage 2E Power-Max
Click to Enlarge

Boost Cooler Stage 3 DI Water Injection
Click to Enlarge

Boost Cooler Stage 3 EFI Water Injection
Click to Enlarge

Boost Cooler Water injection Stage 1 TD
Click to Enlarge

Boost Cooler Stage 2 TD Water Injection
Click to Enlarge

Boost Cooler Stage 2 TD Power-Max
Click to Enlarge

Boost Cooler Stage 3 TD MPG-MAX
Click to Enlarge

options matrix petrol
Click to Enlarge

options matrix Turbodiesel
Click to Enlarge

Installation inside the engine comp
Click to Enlarge

VC-MAF Controller
Click to Enlarge

Reservoir with 9l capacity inside t
Click to Enlarge

LCD-Controller
Click to Enlarge
Description
Snow Performance is one of the world's leading manufacturers of Water Methanol Injection. operating out of their head offices in Wichita Falls, their Water Methanol products are guaranteed to be of the highest quality and free of manufacturing defects.

We will try to beat any genuine quote

We stock a wide range of Snow Performance Products, listed below:
(Pricelist at bottom of page. Please be aware all prices may vary due to changing exchange rates)

Boost Cooler Stage 3 NA EFI DST

Item number: SP10316

The top system for your non Turbo EFI (Electronic fuel injected) engine, 2D-Mapping over fuel injection (optionally also trough boost), easy programmable LCD-display !
Award winning system- our high-end model for your car. The controller creates a delivery map based on EFI signal. For all naturally aspirated engines with traditional EFI system.

Boost Cooler Stage 1- Starter Kit

Item no.:SP10102

Complete Starter-Kit with adjustable pressure-switch.
Operation is simple: the system starts injecting when the boost switch reaches the user-adjustable point and it injects a fixed amount of fluid through the nozzle until the switch opens again.

Boost Cooler Stage 2 Water Injection

Item number: SP10230

Water Injection for all turbo-/supercharged engines up to 2.1 bar of boost pressure. This water/meth kit comes with variable Injection (VC-30) and 300PSI/20bar Pump system. It progressively injects more or less water or water/alcohol, according to manifold boost pressure. Includes a simple handheld display screen to set your injection points.

Boost Cooler Stage 2E Power-Max

Item number: SP10250

The latest development from Snow Performance!
Complete kit with freely programmable 52mm OLED-gauge and optionally Dual Stage Technology.

Fits to all turbocharged engines up to 3.5bar boost.

Boost Cooler Stage 3 DI Water Injection

Item number: SP10317

The Top system for your direct injected engine. 2D-Mapping over fuel injection and boost, easy programmable LCD-display incl. new Dual Stage Technology and terminated weather tight OEM harnessed wiring connections !
Award winning system- the high-end model for your car. The controller creates a delivery map based boost and fuel pressure sensor voltage.

Boost Cooler Stage 3 EFI Water Injection

Item number: SP10315

The Top system for your Turbo-/Supercharged car. 2D-Mapping thorugh fuel injection and/or boost. Easy programmable LCD-display incl. new Dual Stage Technology and terminated weather tight OEM harnessed wiring connections !
Award winning system- The controller creates a delivery map based boost and/or EFI signal. For all charged and naturally aspirated engines with traditional EFI system.

Boost Cooler Waterinjection Stage 1 TD

Item number: SP10103

Complete Starterkit with 300psi Pumpsystem and adjustable boost pressure switch.
The operation is very simple: The Boost Cooler system starts injecting when the boost switch reaches the user-adjustable point and it injects a fixed amount of fluid through the nozzle until the switch opens again.

Boost Cooler Stage 2 TD Water Injection

Item number: SP10231

Complete Water-Methanol Injection kit with variable injection for all Turbdiesels up to2.1 bar boost. Typcially used on VAG TDI, BMW, PSA HDi or similar engines.

This kit progressively injects more or less water or water/alcohol, according to manifold boost pressure. Includes a simple handheld display screen to set your injection points, this water injection controller can be remotely mounted or placed in a convenient place to access based on your application.

Boost Cooler Stage 2 TD Power-Max

Item number: SP10251

The latest development from Snow Performance!
Complete kit with freely programmable 52mm OLED-gauge and optionally Dual Stage Technology.

Fits to all Turbodiesel Engines up to 3.5bar boost.

Boost Cooler Stage 3 TD MPG-MAX

Item number: SP10321

Award winning System!- The further development of our successful Stage 3 Diesel System is the only system on the market, which positively impacts the fuel consumption and emissions in all load ranges.

Separate dual port upgrade kits, direct port upgrade kits, N54/N55 specific direct port injection plates and a wide range of other accessories are also available. Please see price list, or enquire for more information

please see the pricelist for snow performance below, please email or call us to discuss/place your order. WE WILL TRY TO BEAT ANY CHEAPER QUOTE !



Estimated Volumetric Shipping Weight : 1.00 Kg

Additional Information
Snow Performance Pricelist July 2020
 

 

Return to Top



© 2024    Site Maintenance by C2G Ltd