** UK VAT is NOT charged at checkout on any orders going outside of the UK / EU. **
                           ** For any delivery to an EU country ONLY German VAT will be charged,
                                  NOTHING else to pay when the product arrives in your country **

                                  ** Please contact us for any further information / clarification **






BMW > X6M (E71) > F) ELECTRONICS, IGNITION, GAUGES ETC > - Data Logging Etc > AEM

Product Code: aem30-2500



Click to Enlarge

Click to Enlarge
Description
OVERVIEW
AEM’s AQ-1 Data Logger is an easy-to-use vehicle data acquisition device designed for racers and performance enthusiasts of all types who want dynamic, accurate data logging capability, but don’t want to take a second job to pay for it. Any racer or enthusiast with a data logger - whether they compete professionally or every free weekend they have - will tell you how valuable this recorded information is for optimizing vehicle power and dynamics. When you combine this recorded data with track mapping capability, this information can also help improve driver skill.

When it comes to data loggers for most enthusiasts though, they have a few problems: many competitive data loggers are costly, they can be challenging to install, and you end up repeatedly dipping into your bank account to pay for software upgrades and supplementary components to unlock their full potential. Knowing this, AEM has developed the AQ1 Data Logger—a feature-packed data logger that installs easily, can read live parameters from ancillary sensors, AEMnet enabled devices, GPS and more, and put them into a single log to make it easy to view. And it’s available for less than half of the cost of most other data loggers.

WHAT IT DOES
The AQ-1 Data Logger records and stores vehicle data so that it can be downloaded and analyzed. AEM’s AQ-1 Data Logger is easy to use, feature packed, and it won’t break the bank. With logging rates of up to 1000 samples/second per channel, it is one of the fastest data loggers on the market. It has 2GB of logging memory standard, one of the largest. Additionally it features an internal 3-axis accelerometer, a removable SD card for virtually unlimited logging (up to 32GB at a time), and allows you to add an NMEA GPS device.

The AQ1 Data Logger can record AEM gauges, MAP/pressure sensors, TPS, APP, shock travel, load cell sensors, analog and frequency MAF sensors, any 2-wire temp sensor, any 3-wire pressure sensor, RTD, EGT, vehicle speed, injector duty cycle, boost control solenoid, flow sensor, HALL sensor, clutch pressure, brake pressure, and more! It includes three switched-to-ground inputs for clutch, brake, cooling fan ground switch, nitrous solenoid ground or ground switch to start and stop the AQ1 Data Logger (ground activated input) It also has true daisy chain capability via AEMnet-equipped devices. All AEMnet-equipped devices feature a simple pass-through wiring configuration for easy connection. After they are connected, the AQ1 Data Logger identifies the AEM device and asks if you want it added to your log. It’s that easy!

WHY YOU WANT ONE
You don’t need to be a computer programmer or electrical engineer to use the AQ1 Data Logger! It’s ideal for late model EFI-equipped vehicles OR carbureted vehicles, foreign or domestic. The included AEM sensor wizard makes set up and configuration a snap. Log files are easy to decipher, just take a look at the screen captures above.

The AQ1 Data Logger’s flexibility and ease of use for first-time data logger users is why we believe it may be the last logger you will ever need. It installs easily for the electrically savvy, and its intuitive software/user interface simplify the act of reading the logs. More importantly, all logged channels are displayed in one log for easy viewing!

Its modular capabilities also keep your hardware costs down. For example, if you add a 5Hz GPS with power and ground you can achieve latitude and longitude channels, accelerometer, ground speed, etc., without having to purchase each module individually. Our track-mapping capability will be available for no additional cost in December, 2011.

EASY INSTALL & SET UP
AEM’s AQ-1 Data Logger features three versions of wiring harnesses to match your requirements for ease of installation. All three wiring harnesses include a weather-proof connector pre-wired for the AEMnet high speed communication, CAN, RS-232 serial, remote mount USB, 12V power and ground. The mini harness (part# 30-2906-0) includes all the necessary pins and weather seals to build a custom harness. The 18” and 96” flying lead harnesses (part# 30-2906-18, 30-2906-96) features silk screened functions on the body of each wire to ease the installation process and reduce any chance of misidentifying a wire during set-up. Its compact size makes it easy to install (4.80” x 4.55” x 1.44”), and its rugged enclosure features a weather resistant dust cover for added durability.

The AQ-1 Data Logger interfaces with a laptop via USB connection, and the included software features a set-up Wizard and comprehensive AEM sensor library for simple configuration and use.


AQ-1 Data Logger Racer Features
•Set-up Wizard and sensor library simplifies set up process
•Intuitive software
•Logging rate of up to 1000 samples/second per channel!
•Removable SD card for virtually unlimited logging (2GB card included, supports cards up to 32GB)
•Log AEM gauges, MAP/pressure sensors, TPS, APP, shock travel, load cell sensors, analog and frequency MAF sensors, any 2-wire temp sensor, any 3-wire pressure sensor, RTD, EGT, vehicle speed, injector duty cycle, boost control solenoid, flow sensor, HALL sensor, clutch pressure, brake pressure, and more!
•Three switched-to-ground inputs for clutch, brake, cooling fan ground switch, nitrous solenoid ground or ground switch to start and stop AQ1 Logger (ground activated input)
•True daisy chain capability with AEMnet-enabled devices
•All data (sensors, daisy-chain) saved to single log file with real-time clock!
•Compact size (4.8" x 4.55" x 1.44")
•Track mapping capability (Available FREE in December 2011!)

AQ-1 Data Logger Technical Features
•Logging rates of up to 1000HZ (1000 samples/second) per channel (ancillary channels)
•Four analog inputs for that can optionally measure frequency (0-5 V or 0-16 V)
Examples: RPM, vehicle speed, frequency based MAF, injector duty cycle, boost control solenoid, flow sensor, hall sensor, any 3 wire pressure sensor
•Four 0-5V analog inputs with optional pull-up resistor for RTD/Thermistor-style sensor
Examples: AEM gauges, MAP/pressure sensors, TPS/APP/shock travel/load cell sensors, analog MAF sensors, any 2 wire temp sensor, RTD, EGT
•Three switched to ground digital inputs, 16.5 V MAX tolerance
Examples: Clutch/brake/cooling fan ground switch, nitrous solenoid ground or ground switch input to start/stop Logger (Ground activated input)
•AEMnet connection included for easy connection to AEMnet enabled devices
•RS-232 serial input included for adding NMEA GPS device
•Serial port included for reading datastream on aftermarket EMS systems
•Internal 3-axis accelerometer (+/- 4g MAX)
•Included flying lead harness with labeled wires and sealed Packard connector
•CAN-BUS logger included for decoded CAN BUS channels. Provides configurable CAN-BUS for interface with other manufacturer’s CAN-enabled devices. Contact AEM for more info

Need a sensor? We have everything you need to complete your installation!
AEM has a comprehensive selection of sensors, connectors and ancillary components to help you complete your installation Click here for a list and more information.

PLEASE SEE PRICE LIST LINKL BELOW (MS EXCEL)

Estimated Volumetric Shipping Weight : 3.00 Kg

Additional Information
AEM Pricelist
 

Product Code: aem30-2906-18



Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
OVERVIEW
AEM’s high-quality, color-coded 18" flying lead wiring harness for the AQ-1 data logger includes everything you need to properly wire your vehicle in one easy-to-follow configuration. We silk screen each individual wire function onto the body of the wire to ease the installation process and reduce any chance of misidentifying a wire during set-up.

AEM’s AQ-1 flying lead harness is pre-wired for the AEMnet high speed communication network, CAN, RS-232 serial, remote mount USB and more.

KEY FEATURES
•Color coded harness has bundle identifiers and includes silk screened functions on wire body for easy identification
•AQ-1 Connector pre-wired for AEMnet, CAN, RS-232 Serial and USB
•Weather resistant remote mount USB
•Weather resistant connector with plug and wire seals.

PLEASE SEE PRICE LIST LINK BELOW (MS EXCEL)

Estimated Volumetric Shipping Weight : 1.00 Kg

Additional Information
AEM Pricelist
 

Product Code: aem30-2320



Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
Monitor AFR and EGTs From Your iPhone & iPod Touch!

AEM’s X-WiFi Wideband UEGO Controller & EGT Monitor combines our proven wideband UEGO technology (single channel) with an exhaust gas monitoring function that supports up to two EGT sensors (sold separately, PN (30-2067).

X-WiFi installs and conceals easily. It connects effortlessly to an iPhone or iPod Touch, allowing you to use your smart phone as an ancillary AFR and EGT gauge. It is a must have for tuners and enthusiasts who do not want to add an additional set of gauges but want to monitor and control AFR and EGTs. A datastream output is also included for PC viewing of AFR and EGTs via a USB connection.

X-WiFi WIDEBAND UEGO CONTROLLER & EGT MONITOR RACER FEATURES:
•Accurately monitor AFR via 0-5v input and included Bosch 4.2 LSU sensor
•Accurately monitor EGTs (up to 2 banks)
•Easy to install
•Effortless connection to your iPhone or iPod Touch

X-WIFI WIDEBAND UEGO CONTROLLER & EGT MONITOR TUNER FEATURES:
•Serial data stream included for output of AFR and EGTs via USB cable
•Detects AFR sensor problems and outputs error values which can be used to deactivate feedback
•Reads EGTs from 0-1800F
•0-5v analog outputs for each channel (AFR, EGT1, EGT2) for use with most aftermarket engine management systems, data loggers and dashes

The AEM X-WiFi Controller works with virtually all major engine management systems, data acquisition systems, and dyno systems. CLICK HERE for a partial list.

X-WIFI AFR RANGES BY FUEL TYPE
•Reads Gasoline values from 8.5 to 18:1 AFR
•Reads E85 values from 5.7 to 12:1 AFR
•Reads Ethanol values from 5.2 to 11:1 AFR
•Reads Methanol values from 3.7 to 7.8: AFR
•Reads Lambda values from 0.58 to 1.22 AFR

SEE PRICE LIST LINK (MS EXCEL) AND VIDEO BELOW



Estimated Volumetric Shipping Weight : 3.00 Kg

Additional Information
AEM Pricelist
 

Product Code: aem2906-96



Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
OVERVIEW
AEM’s high-quality, color-coded 96" flying lead wiring harness for the AQ-1 data logger includes everything you need to properly wire your vehicle in one easy-to-follow configuration. We silk screen each individual wire function onto the body of the wire to ease the installation process and reduce any chance of misidentifying a wire during set-up.

AEM’s AQ-1 flying lead harness is pre-wired for the AEMnet high speed communication network, CAN, RS-232 serial, remote mount USB and more.

KEY FEATURES
•Color coded harness has bundle identifiers and includes silk screened functions on wire body for easy identification
•AQ-1 Connector pre-wired for AEMnet, CAN, RS-232 Serial and USB
•Weather resistant remote mount USB
•Weather resistant connector with plug and wire seals.

PLEASE SEE PRICE LIST LINK BELOW (MS EXCEL)

Estimated Volumetric Shipping Weight : 1.00 Kg

Additional Information
AEM Pricelist
 

Product Code: aem30-2906-0



Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
OVERVIEWAEM’s high-quality mini harness for the AQ-1 data logger includes all necessary plugs and pins to properly wire your vehicle in one easy-to-follow configuration.

AEM’s AQ-1 mini harness includes pins and the AQ-1 connector pre-wired for the AEMnet high speed communication network, CAN, RS-232 serial, remote mount USB and more.

KEY FEATURES
•AQ-1 Connector pre-wired for AEMnet, CAN, RS-232 Serial and USB
•Weather resistant remote mount USB
•Weather resistant connector with plug and wire seals.

PLEASE SEE PRICE LIST LINK BELOW (MS EXCEL)

Estimated Volumetric Shipping Weight : 1.00 Kg

Additional Information
AEM Pricelist
 

 

Return to Top



© 2024    Site Maintenance by C2G Ltd