** UK VAT is NOT charged at checkout on any orders going outside of the UK / EU. **
                           ** For any delivery to an EU country ONLY German VAT will be charged,
                                  NOTHING else to pay when the product arrives in your country **

                                  ** Please contact us for any further information / clarification **






BMW > M3 & CSL (E46) > I) SEATS, ACCESSORIES, MOUNTS ETC > - Accessories, Mounts, Harnesses etc > All Manufacturers

Product Code: vcbelt4d



Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
BMW Race Seat Installation Kits are by far the easiest and best way to mount race seats into your BMW... but if your looking to retain an OE three-point seat belt in a position that works for you, what do you do?

Our OE Factory Seat Belt to Floor Mount Kit includes the needed components to utilized factory belts after the original buckle/seat has been replaced using one of our Floor Mount Adapter sets or Race Seat Installation kits.
These can be bolted above or sandwich between FMAs for various driver preferences.
Includes:

•New OEM BMW seat belt buckle receptacle
•3-point mounting bracket (powder coated black)
•Needed hardware

PLEASE NOTE:
- This kit is for 4 DOOR & Z CAR models ONLY, for 2 door models please see alternate listing in same website section.
- Priced per EACH seat kit, if you have a pair of race seats you need to order TWO of these kits.
- The floor mount plates in the photos are NOT included in this kit, please see separate listing for these
- Please specify exact vehicle model when ordering

** YOU CAN ALSO buy the brackets shown here separately, to mount a race harness to such race floor mounts instead of factory seat belt system, or indeed to fit BOTH a race harness and factory belts simultaneously. Please enquire fro pricing for these options.



Estimated Volumetric Shipping Weight : 10.00 Kg
 

Product Code: vcbeltoe2d



Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
BMW Race Seat Installation Kits are by far the easiest and best way to mount race seats into your BMW... but if your looking to retain an OE three-point seat belt in a position that works for you, what do you do?

Our OE Factory Seat Belt to Floor Mount Kit includes the needed components to utilized factory belts after the original buckle/seat has been replaced using one of our Floor Mount Adapter sets or Race Seat Installation kits.
These can be bolted above or sandwich between FMAs for various driver preferences.
Includes:

•New OEM BMW seat belt buckle receptacle
•3-point mounting bracket (powder coated black)
•Needed hardware

PLEASE NOTE:
- This kit is for 2 door models ONLY, for 4 door and Z models please see alternate listing in same website section.
- Priced per EACH seat kit, if you have a pair of race seats you need to order TWO of these kits.
- The floor mount plates in the photos are NOT included in this kit, please see seperate listing for these
- Please specify exact vehicle model when ordering



Estimated Volumetric Shipping Weight : 10.00 Kg
 

Product Code: vmacafmsak



Click to Enlarge

Click to Enlarge
Description
Hugely popular Floor Mount Adapters for easy installation of race type seats such as Recaro, Sparco, Momo etc.

These CAD designed and CNC machined Billet Aluminum Floor Mount Adapters allow lowest install of any seat brackets available for lower centre of gravity. They are the best floor mount adapters available for your BMW.

-Adapts side mount seat brackets to the factory floor mounting points
-Lightweight design
-Mounting holes are slotted as opposed to other mounts that just have circular holes punched in them, means they can accommodate different width seats.

-Fully compatible with sliders
-Kit comes complete with all needed hardware
-Made from strong 6061-T6 Billet Aluminum

Available for E36/E46/E34/E39/E90/E92

Priced each seat .

Estimated Volumetric Shipping Weight : 2.00 Kg
 

Product Code: 7920150



Click to Enlarge
Description
6-Point Harness Steel Submarine Bracket

Allows a secure anchor location for your 6-point harness submarine belts. For use with Macht Schnell Liteweight Floor Mounts.

Made from extremely strong and durable steel.

Features:
- Compatible with 5-point and 6-point harnesses
- Includes hardware
- Bolt-in installation

Models Supported:
2008+ E82 1-Series & 1M
1999-2006 E46 3-Series & M3
2006+ E9X 3-Series & M3
2003-2008 E85/6 Z4 & Z4M


Estimated Volumetric Shipping Weight : 10.00 Kg
 

Product Code: 7910101-7910100-7010111



Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge
Description

Race seats can offer a an immediate improvement in driver feedback keeping you planted to the seat and concentrated on driving, while offering a significant weight savings. However, most race seat companies leave it up to the driver for a mounting solution.

Macht Schnell Floor Mounts are designed for the serous track enthusiast in mind. CAD designed and machined from 6061-T6 aerospace aluminum, these mounts are as strong as they are light. Multiple mounting positions allow driver to dial in an exact seat position that is most comfortable and perfectly centered to the steering wheel.

As used by Track Car Performance Magazine (UK), among many others, see blog report here : http://z4mtimeattack.blogspot.co.uk/

Competition Liteweight Floor Mount Features:

- CAD designed and CNC machined from 6061-T6 aerospace aluminum
- Allows fitment for Recaro and most other race seats on the market
- Fully compatible with slider brackets
- Low profile allows for sliders or taller drivers allowing helmet clearance
- Black anodized finish for additional strength and corrosion/wear resistance
- Side provisions allows brackets (sold separately) for OEM seatbelt receptacle mounting or race harnesses
- Available in Black Anodized or Raw Aluminum finish
- Can be used on Driver or Passenger's side

- Sold as a set (one seat)

Fits all models listed below:

- 1992-1999 E36 3-Series & M3 (no convertible models) (79.10.101)
- 1999-2006 E46 3-Series & M3 (no convertible models) (79.10.101)
- 2003-2008 E85/6 Z4 & Z4M (79.10.101)
- 2007> E9X / X8X (79.10.100)
- 2012> F30/F31 3 series (70.10.111)
- 2014> F22/F23 2 series (70.10.111)
- 2014> F32/F33 4 series (70.10.111)
- 2015> F8X M3/M4 (70.10.111)


*(Please specify which colour and which model you require at time of ordering)*




Estimated Volumetric Shipping Weight : 15.00 Kg
 

Product Code: 701212xx



Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

HYBRID VERSION
Click to Enlarge
Description
Allows a safe mounting point for OEM seat belt receptacles and/or bolt-in harnesses. Can run stock 3-point seatbelts, 4/6-point harnesses, or even both at same time. Perfect for those vehicles that see both Street & Track duty.

Crafted from high-grade steel with a durable black powedercoat finish.

Will fit models listed below:

- 2008+ E82 1-Series & 1M
- 1995-1999 E36 3-Series & M3
- 1999-2006 E46 3-Series & M3
- 2006+ E9X 3-Series & M3
- 2003-2008 E85 Z4 & Z4M

- (70.12.12X Hybrid Seatbelt /Harness Receptacles) per seat.
- When ordering please specify whether RH or LH seat, coupe or sedan, and if you wish to use the factory seat belt AND a harness simultaneously.






Estimated Volumetric Shipping Weight : 10.00 Kg
 

Product Code: 7920110



Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
Steel Seat Shell Adapter/Side Mount for Recaro Seats

Macht Schnell aluminum seat shell adapter/side mounts are required for mounting your RECARO seat to your floormounts or sliders.

Features:
- Allows RECARO seats to mount securely to floormounts
- Aluminum construction for strength and weight savings
- Black or clear anodized finish
- Multiple mounting holes offer fixed decline/recline adjustment
- Fits Pole Position, Profi, Profi XL, Pro Racer HANS SPG XL & Pro Racer SPA AL

Models Supported:
2008+ E82 1-Series & 1M
1999-2006 E46 3-Series & M3 (no convertible models)
2006+ E9X 3-Series & M3 (no convertible models)
2003-2008 E85/6 Z4 & Z4M


Estimated Volumetric Shipping Weight : 10.00 Kg
 

Product Code: psdfrtstrtbrc



Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge
Description
What is a Front Strut Brace?
A “Front Strut Brace” or FSB is intended to reduce the flex between the front strut towers (suspension towers) during cornering. Reducing this flex ensures that the suspension remains in the orientation intended, allowing for the suspension to do its job properly.

Who can benefit from a strut bar?
A front strut brace can benefit all car drivers/cars, from road cars to weekend track cars and full race cars, there is a benefit to be gained from a properly engineered strut brace. We are sure that anyone can appreciate the ability for front suspension to remain constant at all times, other benefits include support of the factory strut towers from "mushrooming". This generally occurs if the vehicle hits large potholes, particularly prevalent on UK roads currently! The impact causes the suspension to compress completely, damaging the wheel . However, not only the wheel takes the hit, but the suspension and shock tower as well. Over time, if left unprotected, this can cause expensive structural damage.

What to look for in a strut tower brace?
Sufficient protection of the suspension towers to prevent "mushrooming"
Strong centre bar with adequate bracing and stiffening
Provide adequate under bonnet/hood clearance from both the engine and bonnet/hood.
Allow for suspension changes/adjustments
Made from the best materials available
Ease of fitment and future engine servicing

Features and Benefits
- Lightweight tubular steel bars construction
- 100% TIG welded
- High strength steel plate Tower Mounts
- Powder coated for a durable finish.
- The PSDesigns/GRID FSB is intentionally a 2 peice design (tower mounts and Brace bar) This allows for ease of installation, maximum adjustment and ease of servicing (no need to remove the bar to change the spark plugs!
- The centre bar is a one piece welded construction which will resist bending and flexing.
- The multiple bar configuration, with cross section support bars, resist twisting and bending of the front chassis. Although it does not bolt to the firewall/bulkhead, the bar's multiple tubes resist bending and twisting in multiple planes.
- Open suspension tower design allows for easy access to adjustable camber plates and shock adjustments, whilst also accommodating many aftermarket suspension configurations.
- Designed to offer adequate clearance over the engine components as well as under bonnet/hood clearance.
- Suspension towers offer full 360° support, completely covering the tower area. This can prevent costly structural damage "mushrooming" from potholes, especially with lowered cars.
- Removal of the strut brace takes only minutes with simple hand tools. Adjustments to suspension camber/caster plates can be made without removal of the bar.
- The brace was designed specifically for the E46 M3 2001-2006, However it will also fit 6-cylinder E46 models from 2002 onwards. It is not designed for E46 vehicles from 1999-2001. Early model E46 M3s have these bumps, but with camber plates (longer studs), our Front Strut Brace can still be installed.

Estimated Volumetric Shipping Weight : 8.00 Kg
 

Product Code: psdantsubbrcktb



Click to Enlarge
Description
Provides a secure anchor location for your 5 or 6 point harness submarine belts without the need to cut the chassis to install eye bolts. For use with Lightweight style Floor Mounts from VAC, Macht Schnell, PSDesigns

Made from extremely strong and durable laser cut 4mm thick 304 Stainless Steel.

Features:
- Compatible with all 5-point and 6-point harnesses
- Includes all required hardware (2 High tensile Eyebolts, 2 High tensile 7/16 UNF nuts, and 2 High tensile M8 flanged button head allen bolts)
- Bolt-in installation (bracket bolts under the floor mounts for extra safety)
- One Bracket required per seat/Harness.


Estimated Volumetric Shipping Weight : 3.00 Kg
 

Product Code: psdantsubbrcktr



Click to Enlarge
Description
Provides a secure anchor location for your 5 or 6 point harness submarine belts without the need to cut the chassis to install eye bolts. For use with Lightweight style Floor Mounts from VAC, Macht Schnell, PSDesigns

Made from extremely strong and durable laser cut 4mm thick 304 Stainless Steel.

Features:
- Compatible with all 5-point and 6-point harnesses
- Includes all required hardware (2 High tensile Eyebolts, 2 High tensile 7/16 UNF nuts, and 2 High tensile M8 flanged button head allen bolts)
- Bolt-in installation (bracket bolts under the floor mounts for extra safety)
- One Bracket required per seat/Harness.

Estimated Volumetric Shipping Weight : 2.00 Kg
 

Product Code: psdhrmlapblt



Click to Enlarge
Description
Designed to allow users to mount harness lap belts along with the OEM seat belt receptacles on the same bracket.

Manufactured from 4mm hi-strength steel and powder coated black.

Also available in Stainless Steel at additional cost (special order). Designed to work with or without seat runners and as a consequence have a large range of fitment applications for people running aftermarket seats in all BMW's and other Marques/Models with seats that utilise side mounts. These locate between the runner and the seat mount making their application universal.

suitable for E36/E46 & E9X/E8X

Please state which vehicle model you are ordering for.

Estimated Volumetric Shipping Weight : 3.00 Kg
 

Product Code: vclbrkt



Click to Enlarge
Description
This simple bracket set lets you enable an easy install of a snap-in, or eyelet bolt type harness. This kit allows the fastest installation of race harness lap belts directly to VAC / MACHT SCHNELL ETC Floor Mount Adapters. With this bracket set, our Anti-Sub Mounting Bracket, you can now install your racing harness of choice into your BMW without drilling ANY holes. These brackets simply install between the floor mounts and your floor pan so no extra installation time is needed and they totally eliminate drilling into the chassis as was previously the only option. They can be installed on driver or passenger side.

Includes:
(L & R set) CNC bent and cut Heavy-duty brackets, power coated black for durability.

NOTE: We also offer OEM seatbelt receptacle adapters to work with this, please see separate listing in this section.

Estimated Volumetric Shipping Weight : 1.50 Kg
 

Product Code: re.fm.e46



Click to Enlarge
Description
Rogue Eng seat mount frame E46

The lowest profile mount made! Finally, tall guys can fit into small cars!

While working on customer track cars for years, we often had to fabricate our own floor mounts to get the fixed back seats low enough in the vehicle. This is especially true for vehicles with full roll cages, as most often times a driver's helmet will make contact with the overhead bars of the cage.

Fabricating a custom floor mount that was low enough meant a few hours of measuring, cutting material, welding, grinding, fitting per side. This fabrication process would take over 2 hours for each mount. We have decided to make it easier (and cheaper) to get the lowest floor mount produced.

Here is a sample of the cost savings from a typical shop:
- 24" x 2" CRS strips, 3/16" thickness & 3 hours of fabrication (welding, cutting, drilling, finishing, refitting), for a custom made seat mount to get to the point of a steel mount ready to put a seat assembly (sliders, side mounts, seat) for fitting, can be an expensive fix.

However...
Made from 3/16" cold rolled steel, this one-piece, CNC plasma cut floor mount is designed to bolt directly to the existing factory floor. The corners of the mount have radii on all corners to prevent stress risers and increase strength.

It is designed to fit on the left or right (by flipping it over). Once the seat assembly has been determined, marks can be made on the mount, and then can drilled accordingly. Other holes can be drilled to mount other items such as the 3-point belt anchor or harness lap belts (using the ROGUE ENGINEERING LAP BELT BRACKET, sold separately). The floor mount is bare steel finish, so painting or powder coating is recommended after all the final fitting has been done.

These mounts are sold each, to mount one seat.

Estimated Volumetric Shipping Weight : 6.00 Kg
 

 

Return to Top



© 2024    Site Maintenance by C2G Ltd