Click to Enlarge

M50/S50/S52 Oil filter cap allows an easy* installation of an aftermarket oil cooler by incorporating pressure and return -10 AN fittings. The cap is machined from 6061-T6 billet aluminum and hard coat anodized for scratch resistance. Only oil cooler cap available with a sealing mechanism to direct oil flow through the cooler lines and back through the oil filter. Other oil cooler caps tend to pressurize both inlets and outlets, reducing the effective flow of the cooling system. In addition to the oil cooler ports, cap also features a 1/8" NPT port for an aftermarket sending unit.
Applications include M50, S50, and S52 engines.

Design features include:

-10AN o-ring ports provide a leak free OE-like fit without the use of Teflon tape
Viton o-rings used throughout to maintain function and sealing in a high temperature oil environment
-Uses stock filter cap bolt to reduce cost and simplify installation
-Internal sealing mechanism directs oil flow through the oil cooler and back through the filter
-1/8" NPT side port for external oil pressure gauge
Made in the USA

Estimated Volumetric Shipping Weight : 3.00 Kg

 

Click to Enlarge

Click to Enlarge

Allows you to connect two oil status gauges ( eg. oil pressure and oil temp.) to most BMW 6 cylinder engines.

Fitting Time: 3.00 hours.
Estimated Installation Cost at Crest Workshops : £175.00 inc. VAT
Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Direct replacement oil filter housing lid incorporating two threaded ports to allow connection of aftermarket gauges ( Eg: oil pressure and oil temperature).

This version is suitable for the following engines :

BMW E30.E36.E36M3.E46M3
M40.M42.M50.S50.S52.S54

Please refer to alternate listing on Variations Section (use red link button at top right) for lid to suit the following:

BMW E36/328.E46
M44.M52.M52TU.M54

Estimated Volumetric Shipping Weight : 1.00 Kg

 

Click to Enlarge

VAC M54 Billet Oil Filter Housing Cap allows instalation of sensors so you can quickly and easily monitor pressure or the temperature of your oil.

Despite being a more complex configuration, we have managed to keep the costs down.

•Each lid comes spot-drilled, not through drilled, as these lids actually rotate to install- and uninstall, this allows you to drill and tap exactly where you will want your sensors.
This is to be done after test fitting to your engine, this insure the most room for your sensors, and the cleanest install.

*Keep in mind: arranging a kit that attempts to cool the oil through the filter housing cap is not recommended*



Estimated Volumetric Shipping Weight : 10.00 Kg